Science Journal of Energy Engineering

| Peer-Reviewed |

Experimental Development of Low Flow Rate Pressure Feed System and Design of Installation for Analysis of Work Process in Hydrogen Synthesis Power Systems on Powder Aluminium

Received: 07 June 2013    Accepted:     Published: 10 July 2013
Views:       Downloads:

Share This Article

Abstract

Installation is designed for experimental development of pressure feed system of low consumption (1-10 g/s) of powder metal (including aluminum powder brands ASD, PAP, PAD) to combustion zone of combustion chamber. It allows choosing optimal lift gas for powder metal fluidization, calibrating powder gas suspension flow measurement fitting and minimizing lift gas expenditure in powder metal flow using drum-type gas counter GSB-400.

DOI 10.11648/j.sjee.20130102.11
Published in Science Journal of Energy Engineering (Volume 1, Issue 2, June 2013)
Page(s) 5-12
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Oxidation of Aluminum, Powder Metal, Fluidization, Processes in the Combustion Chamber, the Synthesis of Hydrogen, Supply System, Thermodynamic Calculations

References
[1] O. E. Shatskiy, A. A. Shcherbakov, Yu. N. Vlasov, "Fluidized Powders Supply in Mode of Stagnation Dense Layer," Combustion Processes and Environmental Conservation, RATI, Rybinsk, 1993, pp. 43–47.
[2] B. G. Trusov, "Program system TERRA for simulation phase and thermal chemical equilibrium," Proceedings of the XIV International Conference on Chemical Thermodynamics, St-Petersburg, Russia, 2002, pp. 483–484.
[3] D. A. Yagodnikov, "Powder Metals Ignition and Combustion," MSTU named after N. E. Bauman publ., Moscow, 2009, p. 432.
Author Information
  • Moscow State Technical University named after N. E. Bauman, Moscow, Russia

  • Moscow State Technical University named after N. E. Bauman, Moscow, Russia

  • Moscow State Technical University named after N. E. Bauman, Moscow, Russia

  • Moscow State Technical University named after N. E. Bauman, Moscow, Russia

  • Moscow State Technical University named after N. E. Bauman, Moscow, Russia

Cite This Article
  • APA Style

    Dmitry Alexeevich Yagodnikov, Yuri Nikolaevich Vlasov, Nikolai Ivanovich Bykov, Ivan Anatoljevich Desyatnichenko, Olesya Andreevna Vorozheeva. (2013). Experimental Development of Low Flow Rate Pressure Feed System and Design of Installation for Analysis of Work Process in Hydrogen Synthesis Power Systems on Powder Aluminium. Science Journal of Energy Engineering, 1(2), 5-12. https://doi.org/10.11648/j.sjee.20130102.11

    Copy | Download

    ACS Style

    Dmitry Alexeevich Yagodnikov; Yuri Nikolaevich Vlasov; Nikolai Ivanovich Bykov; Ivan Anatoljevich Desyatnichenko; Olesya Andreevna Vorozheeva. Experimental Development of Low Flow Rate Pressure Feed System and Design of Installation for Analysis of Work Process in Hydrogen Synthesis Power Systems on Powder Aluminium. Sci. J. Energy Eng. 2013, 1(2), 5-12. doi: 10.11648/j.sjee.20130102.11

    Copy | Download

    AMA Style

    Dmitry Alexeevich Yagodnikov, Yuri Nikolaevich Vlasov, Nikolai Ivanovich Bykov, Ivan Anatoljevich Desyatnichenko, Olesya Andreevna Vorozheeva. Experimental Development of Low Flow Rate Pressure Feed System and Design of Installation for Analysis of Work Process in Hydrogen Synthesis Power Systems on Powder Aluminium. Sci J Energy Eng. 2013;1(2):5-12. doi: 10.11648/j.sjee.20130102.11

    Copy | Download

  • @article{10.11648/j.sjee.20130102.11,
      author = {Dmitry Alexeevich Yagodnikov and Yuri Nikolaevich Vlasov and Nikolai Ivanovich Bykov and Ivan Anatoljevich Desyatnichenko and Olesya Andreevna Vorozheeva},
      title = {Experimental Development of Low Flow Rate Pressure Feed System and Design of Installation for Analysis of Work Process in Hydrogen Synthesis Power Systems on Powder Aluminium},
      journal = {Science Journal of Energy Engineering},
      volume = {1},
      number = {2},
      pages = {5-12},
      doi = {10.11648/j.sjee.20130102.11},
      url = {https://doi.org/10.11648/j.sjee.20130102.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.sjee.20130102.11},
      abstract = {Installation is designed for experimental development of pressure feed system of low consumption (1-10 g/s) of powder metal (including aluminum powder brands ASD, PAP, PAD) to combustion zone of combustion chamber. It allows choosing optimal lift gas for powder metal fluidization, calibrating powder gas suspension flow measurement fitting and minimizing lift gas expenditure in powder metal flow using drum-type gas counter GSB-400.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Experimental Development of Low Flow Rate Pressure Feed System and Design of Installation for Analysis of Work Process in Hydrogen Synthesis Power Systems on Powder Aluminium
    AU  - Dmitry Alexeevich Yagodnikov
    AU  - Yuri Nikolaevich Vlasov
    AU  - Nikolai Ivanovich Bykov
    AU  - Ivan Anatoljevich Desyatnichenko
    AU  - Olesya Andreevna Vorozheeva
    Y1  - 2013/07/10
    PY  - 2013
    N1  - https://doi.org/10.11648/j.sjee.20130102.11
    DO  - 10.11648/j.sjee.20130102.11
    T2  - Science Journal of Energy Engineering
    JF  - Science Journal of Energy Engineering
    JO  - Science Journal of Energy Engineering
    SP  - 5
    EP  - 12
    PB  - Science Publishing Group
    SN  - 2376-8126
    UR  - https://doi.org/10.11648/j.sjee.20130102.11
    AB  - Installation is designed for experimental development of pressure feed system of low consumption (1-10 g/s) of powder metal (including aluminum powder brands ASD, PAP, PAD) to combustion zone of combustion chamber. It allows choosing optimal lift gas for powder metal fluidization, calibrating powder gas suspension flow measurement fitting and minimizing lift gas expenditure in powder metal flow using drum-type gas counter GSB-400.
    VL  - 1
    IS  - 2
    ER  - 

    Copy | Download

  • Sections