Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material

G. Santiago-Rosas; M. Flores-Domínguez; J. P. Nadeau

doi:doi:10.11648/j.sjee.20140205.12

| Peer-Reviewed

Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material

G. Santiago-Rosas, M. Flores-Domínguez, J. P. Nadeau

Published in Science Journal of Energy Engineering (Volume 2, Issue 5)

Received: 7 November 2014 Accepted: 12 November 2014 Published: 17 November 2014

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Elevated operating temperatures reduce the solar to electrical conversion efficiency of photovoltaic devices. In this paper, a numerical study is conducted to understand the thermal behavior of a photovoltaic panel with phase change materials. The analysis of the PV/PCM system was realized in three phases: temperature rise, start of melting of PCM and molten PCM so, three mathematical models for the resolution of thermal model of PV/PCM system during the solar insolation were used. First, an analytical model was used to study the behavior of PCM in state solid, after, an explicit and an implicit model were used to study globally the transfers. Different simplifications are introduced in the heat balances to realize a simple numerical approach. The Matlab software was used to solve different proposed models in this analysis. The results obtained are considered as a first approach to the study of a PV/PCM system.

Published in	Science Journal of Energy Engineering (Volume 2, Issue 5)
DOI	10.11648/j.sjee.20140205.12
Page(s)	58-64
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Photovoltaic Panel, Phase Change Material, Numerical Analysis

References

[1]	H. G. Teo, H., P. S. Lee, M. N. A Hawlader, “An active cooling system for photovoltaic modules,” Applied Energy, vol. 90, no 1, pp. 309-315, 2012.
[2]	W. He, Y. Zhang, J. Li, “Comparative experiment study on photovoltaic and thermal solar system under natural circulation of water,” Applied Thermal Engineering, 31(16), pp. 3369-3376, Nov. 2011.
[3]	M. J. Huang, P. C. Earnes, B. Norton, “Natural convection in an internally finned phase change material heat sink for the thermal management of photovoltaics,” Solar Energy and Solar Cells, vol. 95, no 7, pp. 1598-1603, 2011.
[4]	B. Vidal Jiménez, “Modelización del cambio de fase sólido-líquido. Aplicación a sistemas de acumulación de energía térmica,” s.l.: Centro Tecnológico de Transferencia de Calor, Depto.de Máquinas y motores térmicos, Universidad Politécnica de Cataluña, 2007.
[5]	M. J. Huang, P. C. Earnes, B. Norton, “Thermal regulations of building-integrated photovoltaics using phase change materials,” International Journal of Heat and Mass Transfer, vol. 47, no 12, pp. 2415-2733, 2004.
[6]	J. P. Braun, B. Faraggi, A. Labouoret, “Les cellules solaires”, ETSF (Editions Techniques et Scientifiques Françaises) – Paris, 1996.
[7]	J. P. Nadeau, “Energetique Industrielle”. Talence: Art et Métiers-ParisTech, 2009.
[8]	Y. Jannot, “Transformation de Laplace inverse”, En: Transferts thermiques, p. 113, 2002.
[9]	H. Mehling, L. F. Cabeza, Heat and cold storage with PCM Handbook, Publisher Springer, Germany, 2008.
[10]	F. Rouault, “Analyse expérimentale et modélisation d’un échangeur-stockeur contenant des matériaux à changement de phase,” Congrès SFT (Société Française de Thermique), Talence, France, 2012.

Cite This Article

Plain Text BibTeX RIS

APA Style

G. Santiago-Rosas, M. Flores-Domínguez, J. P. Nadeau. (2014). Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material. Science Journal of Energy Engineering, 2(5), 58-64. https://doi.org/10.11648/j.sjee.20140205.12

Copy | Download

ACS Style

G. Santiago-Rosas; M. Flores-Domínguez; J. P. Nadeau. Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material. Sci. J. Energy Eng. 2014, 2(5), 58-64. doi: 10.11648/j.sjee.20140205.12

Copy | Download

AMA Style

G. Santiago-Rosas, M. Flores-Domínguez, J. P. Nadeau. Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material. Sci J Energy Eng. 2014;2(5):58-64. doi: 10.11648/j.sjee.20140205.12

Copy | Download

@article{10.11648/j.sjee.20140205.12,
  author = {G. Santiago-Rosas and M. Flores-Domínguez and J. P. Nadeau},
  title = {Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material},
  journal = {Science Journal of Energy Engineering},
  volume = {2},
  number = {5},
  pages = {58-64},
  doi = {10.11648/j.sjee.20140205.12},
  url = {https://doi.org/10.11648/j.sjee.20140205.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjee.20140205.12},
  abstract = {Elevated operating temperatures reduce the solar to electrical conversion efficiency of photovoltaic devices. In this paper, a numerical study is conducted to understand the thermal behavior of a photovoltaic panel with phase change materials. The analysis of the PV/PCM system was realized in three phases: temperature rise, start of melting of PCM and molten PCM so, three mathematical models for the resolution of thermal model of PV/PCM system during the solar insolation were used. First, an analytical model was used to study the behavior of PCM in state solid, after, an explicit and an implicit model were used to study globally the transfers. Different simplifications are introduced in the heat balances to realize a simple numerical approach. The Matlab software was used to solve different proposed models in this analysis. The results obtained are considered as a first approach to the study of a PV/PCM system.},
 year = {2014}
}

Copy | Download

TY - JOUR
T1 - Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material
AU - G. Santiago-Rosas
AU - M. Flores-Domínguez
AU - J. P. Nadeau
Y1 - 2014/11/17
PY - 2014
N1 - https://doi.org/10.11648/j.sjee.20140205.12
DO - 10.11648/j.sjee.20140205.12
T2 - Science Journal of Energy Engineering
JF - Science Journal of Energy Engineering
JO - Science Journal of Energy Engineering
SP - 58
EP - 64
PB - Science Publishing Group
SN - 2376-8126
UR - https://doi.org/10.11648/j.sjee.20140205.12
AB - Elevated operating temperatures reduce the solar to electrical conversion efficiency of photovoltaic devices. In this paper, a numerical study is conducted to understand the thermal behavior of a photovoltaic panel with phase change materials. The analysis of the PV/PCM system was realized in three phases: temperature rise, start of melting of PCM and molten PCM so, three mathematical models for the resolution of thermal model of PV/PCM system during the solar insolation were used. First, an analytical model was used to study the behavior of PCM in state solid, after, an explicit and an implicit model were used to study globally the transfers. Different simplifications are introduced in the heat balances to realize a simple numerical approach. The Matlab software was used to solve different proposed models in this analysis. The results obtained are considered as a first approach to the study of a PV/PCM system.
VL - 2
IS - 5
ER -

Copy | Download

Author Information

G. Santiago-Rosas

Center for Research and Advanced Studies, National Polytechnic Institute, Mexico City, Mexico; Trefle Laboratory, Arts and Trade Paris-Tech (ENSAM), Talance, France
M. Flores-Domínguez

Trefle Laboratory, Arts and Trade Paris-Tech (ENSAM), Talance, France
J. P. Nadeau

Trefle Laboratory, Arts and Trade Paris-Tech (ENSAM), Talance, France

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

G. Santiago-Rosas, M. Flores-Domínguez, J. P. Nadeau. (2014). Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material. Science Journal of Energy Engineering, 2(5), 58-64. https://doi.org/10.11648/j.sjee.20140205.12

Copy | Download

ACS Style

G. Santiago-Rosas; M. Flores-Domínguez; J. P. Nadeau. Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material. Sci. J. Energy Eng. 2014, 2(5), 58-64. doi: 10.11648/j.sjee.20140205.12

Copy | Download

AMA Style

G. Santiago-Rosas, M. Flores-Domínguez, J. P. Nadeau. Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material. Sci J Energy Eng. 2014;2(5):58-64. doi: 10.11648/j.sjee.20140205.12

Copy | Download

@article{10.11648/j.sjee.20140205.12,
  author = {G. Santiago-Rosas and M. Flores-Domínguez and J. P. Nadeau},
  title = {Numerical Analysis of the Thermal Behaviour of a Photovoltaic Panel Coupled with Phase Change Material},
  journal = {Science Journal of Energy Engineering},
  volume = {2},
  number = {5},
  pages = {58-64},
  doi = {10.11648/j.sjee.20140205.12},
  url = {https://doi.org/10.11648/j.sjee.20140205.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjee.20140205.12},
  abstract = {Elevated operating temperatures reduce the solar to electrical conversion efficiency of photovoltaic devices. In this paper, a numerical study is conducted to understand the thermal behavior of a photovoltaic panel with phase change materials. The analysis of the PV/PCM system was realized in three phases: temperature rise, start of melting of PCM and molten PCM so, three mathematical models for the resolution of thermal model of PV/PCM system during the solar insolation were used. First, an analytical model was used to study the behavior of PCM in state solid, after, an explicit and an implicit model were used to study globally the transfers. Different simplifications are introduced in the heat balances to realize a simple numerical approach. The Matlab software was used to solve different proposed models in this analysis. The results obtained are considered as a first approach to the study of a PV/PCM system.},
 year = {2014}
}

Copy | Download