Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System

Omar Ngala Sarr; Fabe Idrissa Barro; Oumar Absatou Niasse; Fatou Dia; Nacir Mbengue; Bassirou Ba; Cheikh Sene

doi:doi:10.11648/j.sjee.20170502.11

| Peer-Reviewed

Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System

Omar Ngala Sarr, Fabe Idrissa Barro, Oumar Absatou Niasse, Fatou Dia, Nacir Mbengue, Bassirou Ba, Cheikh Sene

Published in Science Journal of Energy Engineering (Volume 5, Issue 2)

Received: 24 February 2017 Accepted: 8 March 2017 Published: 27 March 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This study deals with the implementation of a methodological guide for the maintenance of photovoltaic systems in Senegal. Typical PV systems components are photovoltaic panels, and inverter, a regulator, connecting cables and the battery; so Failure Modes Effect and Criticality Analysis (FMECA) is performed on the PV system in order to increase the reliability and reduce system failures. To do that, a functional analysis of the system through an octopus diagram and a dysfunctional analysis through a fault tree, are used as a decision support for the choice of the coefficients to obtain the full system FMEA. The obtained results allowed us to detect about 40% of the types of failure that cause over 60% of system malfunction. Anticipating these types of failure through preventive maintenance would make the PV system more reliable.

Published in	Science Journal of Energy Engineering (Volume 5, Issue 2)
DOI	10.11648/j.sjee.20170502.11
Page(s)	40-47
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

FMECA, Photovoltaic Systems, Maintenance

References

[1]	Monchy, François, Vernier Maintenance: Méthodes et organisations Ed. 3, Dunod 2010 page 140-141.
[2]	M. V´azquez, C. Algora, I. Rey-Stolle et J. Gonza´lez. “III-V concentrator solar cell reliability prediction based on quantitative LED reliability data”. Progress in Photovoltaics: Research and Applications, Vol. 15, No. 6, pp. 477–491, 2007.
[3]	Lyonnet, Patrick, Fiabilité industrielle: La boîte à outils des processus de fiabilité et maintenance AFNOR 2016.
[4]	A. Labouret et M. Villoz. “Energie solaire photovoltaïque”. 4e Ed., 2009.
[5]	Heng, Jean, Pratique de la maintenance preventive, Dunod 2011 page 17.
[6]	H. Liao et E. Elsayed. “Reliability prediction and testing plan based on an accelerated degradation rate model”. International Journal of Materials and Product Technology, Vol. 21, No. 5, pp. 402–422, 2004.
[7]	Antonio Luque, Steven Hegedus, “Handbook of Photovoltaic Science and Engineering”, 2003.
[8]	Gillet-Goinard, Florence, Monar, Christel, “Toute la fonction QSSE (Qualité/Santé/Sécurité/ Environnement): Savoir/ Savoir-faire/ Savoir être”, Dunod 2013.
[9]	Landy, Gérard, “AMDEC: Guide pratique”, AFNOR 2011.
[10]	Rémi LARONDE, Thèse de Doctorat: Fiabilité et durabilité d’un système complexe dédié aux énergies renouvelables Application à un système photovoltaïque.
[11]	Labib, Ashraf, “Learning from Failures: Decision Analysis of Major Disasters”, Elsevier Science, 2014.

Cite This Article

Plain Text BibTeX RIS

APA Style

Omar Ngala Sarr, Fabe Idrissa Barro, Oumar Absatou Niasse, Fatou Dia, Nacir Mbengue, et al. (2017). Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System. Science Journal of Energy Engineering, 5(2), 40-47. https://doi.org/10.11648/j.sjee.20170502.11

Copy | Download

ACS Style

Omar Ngala Sarr; Fabe Idrissa Barro; Oumar Absatou Niasse; Fatou Dia; Nacir Mbengue, et al. Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System. Sci. J. Energy Eng. 2017, 5(2), 40-47. doi: 10.11648/j.sjee.20170502.11

Copy | Download

AMA Style

Omar Ngala Sarr, Fabe Idrissa Barro, Oumar Absatou Niasse, Fatou Dia, Nacir Mbengue, et al. Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System. Sci J Energy Eng. 2017;5(2):40-47. doi: 10.11648/j.sjee.20170502.11

Copy | Download

@article{10.11648/j.sjee.20170502.11,
  author = {Omar Ngala Sarr and Fabe Idrissa Barro and Oumar Absatou Niasse and Fatou Dia and Nacir Mbengue and Bassirou Ba and Cheikh Sene},
  title = {Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System},
  journal = {Science Journal of Energy Engineering},
  volume = {5},
  number = {2},
  pages = {40-47},
  doi = {10.11648/j.sjee.20170502.11},
  url = {https://doi.org/10.11648/j.sjee.20170502.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjee.20170502.11},
  abstract = {This study deals with the implementation of a methodological guide for the maintenance of photovoltaic systems in Senegal. Typical PV systems components are photovoltaic panels, and inverter, a regulator, connecting cables and the battery; so Failure Modes Effect and Criticality Analysis (FMECA) is performed on the PV system in order to increase the reliability and reduce system failures. To do that, a functional analysis of the system through an octopus diagram and a dysfunctional analysis through a fault tree, are used as a decision support for the choice of the coefficients to obtain the full system FMEA. The obtained results allowed us to detect about 40% of the types of failure that cause over 60% of system malfunction. Anticipating these types of failure through preventive maintenance would make the PV system more reliable.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System
AU  - Omar Ngala Sarr
AU  - Fabe Idrissa Barro
AU  - Oumar Absatou Niasse
AU  - Fatou Dia
AU  - Nacir Mbengue
AU  - Bassirou Ba
AU  - Cheikh Sene
Y1  - 2017/03/27
PY  - 2017
N1  - https://doi.org/10.11648/j.sjee.20170502.11
DO  - 10.11648/j.sjee.20170502.11
T2  - Science Journal of Energy Engineering
JF  - Science Journal of Energy Engineering
JO  - Science Journal of Energy Engineering
SP  - 40
EP  - 47
PB  - Science Publishing Group
SN  - 2376-8126
UR  - https://doi.org/10.11648/j.sjee.20170502.11
AB  - This study deals with the implementation of a methodological guide for the maintenance of photovoltaic systems in Senegal. Typical PV systems components are photovoltaic panels, and inverter, a regulator, connecting cables and the battery; so Failure Modes Effect and Criticality Analysis (FMECA) is performed on the PV system in order to increase the reliability and reduce system failures. To do that, a functional analysis of the system through an octopus diagram and a dysfunctional analysis through a fault tree, are used as a decision support for the choice of the coefficients to obtain the full system FMEA. The obtained results allowed us to detect about 40% of the types of failure that cause over 60% of system malfunction. Anticipating these types of failure through preventive maintenance would make the PV system more reliable.
VL  - 5
IS  - 2
ER  -

Copy | Download

Author Information

Omar Ngala Sarr

Department of Physics, Faculty of Science and Technology, Semiconductors and Solar Energy Laboratory - Cheikh Anta Diop University, Dakar, Senegal
Fabe Idrissa Barro

Department of Physics, Faculty of Science and Technology, Semiconductors and Solar Energy Laboratory - Cheikh Anta Diop University, Dakar, Senegal
Oumar Absatou Niasse

Department of Physics, Faculty of Science and Technology, Semiconductors and Solar Energy Laboratory - Cheikh Anta Diop University, Dakar, Senegal
Fatou Dia

Department of Physics, Faculty of Science and Technology, Semiconductors and Solar Energy Laboratory - Cheikh Anta Diop University, Dakar, Senegal
Nacir Mbengue

Department of Physics, Faculty of Science and Technology, Semiconductors and Solar Energy Laboratory - Cheikh Anta Diop University, Dakar, Senegal
Bassirou Ba

Department of Physics, Faculty of Science and Technology, Semiconductors and Solar Energy Laboratory - Cheikh Anta Diop University, Dakar, Senegal
Cheikh Sene

Department of Physics, Faculty of Science and Technology, Semiconductors and Solar Energy Laboratory - Cheikh Anta Diop University, Dakar, Senegal

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Omar Ngala Sarr, Fabe Idrissa Barro, Oumar Absatou Niasse, Fatou Dia, Nacir Mbengue, et al. (2017). Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System. Science Journal of Energy Engineering, 5(2), 40-47. https://doi.org/10.11648/j.sjee.20170502.11

Copy | Download

ACS Style

Omar Ngala Sarr; Fabe Idrissa Barro; Oumar Absatou Niasse; Fatou Dia; Nacir Mbengue, et al. Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System. Sci. J. Energy Eng. 2017, 5(2), 40-47. doi: 10.11648/j.sjee.20170502.11

Copy | Download

AMA Style

Omar Ngala Sarr, Fabe Idrissa Barro, Oumar Absatou Niasse, Fatou Dia, Nacir Mbengue, et al. Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System. Sci J Energy Eng. 2017;5(2):40-47. doi: 10.11648/j.sjee.20170502.11

Copy | Download

@article{10.11648/j.sjee.20170502.11,
  author = {Omar Ngala Sarr and Fabe Idrissa Barro and Oumar Absatou Niasse and Fatou Dia and Nacir Mbengue and Bassirou Ba and Cheikh Sene},
  title = {Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System},
  journal = {Science Journal of Energy Engineering},
  volume = {5},
  number = {2},
  pages = {40-47},
  doi = {10.11648/j.sjee.20170502.11},
  url = {https://doi.org/10.11648/j.sjee.20170502.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjee.20170502.11},
  abstract = {This study deals with the implementation of a methodological guide for the maintenance of photovoltaic systems in Senegal. Typical PV systems components are photovoltaic panels, and inverter, a regulator, connecting cables and the battery; so Failure Modes Effect and Criticality Analysis (FMECA) is performed on the PV system in order to increase the reliability and reduce system failures. To do that, a functional analysis of the system through an octopus diagram and a dysfunctional analysis through a fault tree, are used as a decision support for the choice of the coefficients to obtain the full system FMEA. The obtained results allowed us to detect about 40% of the types of failure that cause over 60% of system malfunction. Anticipating these types of failure through preventive maintenance would make the PV system more reliable.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Analysis of Failure Modes Effect and Criticality Analysis (FMECA): A Stand-Alone Photovoltaic System
AU  - Omar Ngala Sarr
AU  - Fabe Idrissa Barro
AU  - Oumar Absatou Niasse
AU  - Fatou Dia
AU  - Nacir Mbengue
AU  - Bassirou Ba
AU  - Cheikh Sene
Y1  - 2017/03/27
PY  - 2017
N1  - https://doi.org/10.11648/j.sjee.20170502.11
DO  - 10.11648/j.sjee.20170502.11
T2  - Science Journal of Energy Engineering
JF  - Science Journal of Energy Engineering
JO  - Science Journal of Energy Engineering
SP  - 40
EP  - 47
PB  - Science Publishing Group
SN  - 2376-8126
UR  - https://doi.org/10.11648/j.sjee.20170502.11
AB  - This study deals with the implementation of a methodological guide for the maintenance of photovoltaic systems in Senegal. Typical PV systems components are photovoltaic panels, and inverter, a regulator, connecting cables and the battery; so Failure Modes Effect and Criticality Analysis (FMECA) is performed on the PV system in order to increase the reliability and reduce system failures. To do that, a functional analysis of the system through an octopus diagram and a dysfunctional analysis through a fault tree, are used as a decision support for the choice of the coefficients to obtain the full system FMEA. The obtained results allowed us to detect about 40% of the types of failure that cause over 60% of system malfunction. Anticipating these types of failure through preventive maintenance would make the PV system more reliable.
VL  - 5
IS  - 2
ER  -

Copy | Download