Science Journal of Energy Engineering

| Peer-Reviewed |

Design and Optimization of Domestic Solar Dryer

Received: 28 September 2017    Accepted: 16 October 2017    Published: 24 November 2017
Views:       Downloads:

Share This Article

Abstract

This paper presents the design, simulation and optimization of a mixed-mode solar dryer based on the climatic data of location Kigali and mangoes were used as a reference product. The model was simulated using TRNSYS software for thermal analysis and the results was shown on a graph which presents the useful temperature gain for drying. The results were used for solar drying simulation to evaluate its performance in terms of drying rate, here MATLAB was utilized for this. It is clear on the graph how the moisture content of mangoes decreases with time up to 10%, which is their equilibrium moisture level for safe storage. The optimization of the model was further done with the modification of the solar dryer by making the front wall of the drying chamber with a glass which adds a greenhouse effect, hence a further increase in drying temperature. The solar drying simulation was again carried out and a clear difference in drying time was observed in the drying rate graph where the time of moisture content removal was reduced from 24 hours to 10 hours.

DOI 10.11648/j.sjee.20170506.11
Published in Science Journal of Energy Engineering (Volume 5, Issue 6, December 2017)
Page(s) 130-135
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Solar Energy Technology, Energy Resources, Engineering Design

References
[1] M. A. Aravindh. A. Sreekumar, “Solar Drying- A Sustainable Way of Food Processing,” Energy sustainability through green energy, p. 521, 2015.
[2] "www.geda.com," GEDA-Gujarat Energy Development Agency, 2003. [Online].
[3] "www.geda.com.," GEDA-Gujarat Energy Development Agency, 2003. [Online]. [Accessed 17 January 2017].
[4] Dorf R. G., Energy Resources and Policy, Massachusetts: Addison Werley Publishing Company, 1989.
[5] Sharma, A., Chen, C. R., Vu Lan, N., “Solar- energy drying systems,” A review. Renewable and Sustainable Energy Reviews, vol. 13, pp. 1185-1210, 2009.
[6] Michael, J. Moran, Fundamentals of Engineering Thermodynamics.
[7] Lalit, R. Verma, “Drying of Agricultural Products and Grains”.
[8] Sodha, M. S.; Bansal, N. K.; Kumar, A.; Bansal, P. K and Malik, M. A, “Solar crop drying,” vol. Vol. I and II, 1987.
[9] Ekechukwu, O. V., Norton, B., “Review of solar-energy drying systems II,” an overview of solar drying technology. Energy Conversion & Management, vol. 40, pp. 615-655, 1999.
[10] Ekechukwu, O. V., Norton, B, “Review of solar-energy drying systems II,” in An overview of solar drying technology, Energy Conversion & Management, pp. 615-655.
[11] UmeshToshniwal, S. R Karale, “International Journal of Engineering Research andApplications (IJERA),” Vols. 2248-9622.
[12] Nandi P., “Solar Thermal Energy Utilization in Food Processing Industry in India,” Pacific Journal of Science and Technology, vol. 10, pp. 123-131., 2009.
[13] Sodha, M. S., Dang, A., Bansal, P. K., Sharma, S. B, “An analytical and experimental study of open sun drying and a cabinet type drier,” Energy Conversion &Management,, vol. 25, p. 263–271.
[14] Ampratwum, D. B, “Design of solar dryer for dates,” Vols. AMA, 29 (3), Basunia, M. A, 1889, pp. 59-62.
Author Information
  • Department of Mechanical and Energy Engineering, School of Engineering, University of Rwanda, Kigali, Rwanda

  • Department of Mechanical and Energy Engineering, School of Engineering, University of Rwanda, Kigali, Rwanda

  • Department of Mechanical and Energy Engineering, School of Engineering, University of Rwanda, Kigali, Rwanda

Cite This Article
  • APA Style

    Hakizimana Eustache, Emmanuel Dushimire, Charlotte Amizero. (2017). Design and Optimization of Domestic Solar Dryer. Science Journal of Energy Engineering, 5(6), 130-135. https://doi.org/10.11648/j.sjee.20170506.11

    Copy | Download

    ACS Style

    Hakizimana Eustache; Emmanuel Dushimire; Charlotte Amizero. Design and Optimization of Domestic Solar Dryer. Sci. J. Energy Eng. 2017, 5(6), 130-135. doi: 10.11648/j.sjee.20170506.11

    Copy | Download

    AMA Style

    Hakizimana Eustache, Emmanuel Dushimire, Charlotte Amizero. Design and Optimization of Domestic Solar Dryer. Sci J Energy Eng. 2017;5(6):130-135. doi: 10.11648/j.sjee.20170506.11

    Copy | Download

  • @article{10.11648/j.sjee.20170506.11,
      author = {Hakizimana Eustache and Emmanuel Dushimire and Charlotte Amizero},
      title = {Design and Optimization of Domestic Solar Dryer},
      journal = {Science Journal of Energy Engineering},
      volume = {5},
      number = {6},
      pages = {130-135},
      doi = {10.11648/j.sjee.20170506.11},
      url = {https://doi.org/10.11648/j.sjee.20170506.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.sjee.20170506.11},
      abstract = {This paper presents the design, simulation and optimization of a mixed-mode solar dryer based on the climatic data of location Kigali and mangoes were used as a reference product. The model was simulated using TRNSYS software for thermal analysis and the results was shown on a graph which presents the useful temperature gain for drying. The results were used for solar drying simulation to evaluate its performance in terms of drying rate, here MATLAB was utilized for this. It is clear on the graph how the moisture content of mangoes decreases with time up to 10%, which is their equilibrium moisture level for safe storage. The optimization of the model was further done with the modification of the solar dryer by making the front wall of the drying chamber with a glass which adds a greenhouse effect, hence a further increase in drying temperature. The solar drying simulation was again carried out and a clear difference in drying time was observed in the drying rate graph where the time of moisture content removal was reduced from 24 hours to 10 hours.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Design and Optimization of Domestic Solar Dryer
    AU  - Hakizimana Eustache
    AU  - Emmanuel Dushimire
    AU  - Charlotte Amizero
    Y1  - 2017/11/24
    PY  - 2017
    N1  - https://doi.org/10.11648/j.sjee.20170506.11
    DO  - 10.11648/j.sjee.20170506.11
    T2  - Science Journal of Energy Engineering
    JF  - Science Journal of Energy Engineering
    JO  - Science Journal of Energy Engineering
    SP  - 130
    EP  - 135
    PB  - Science Publishing Group
    SN  - 2376-8126
    UR  - https://doi.org/10.11648/j.sjee.20170506.11
    AB  - This paper presents the design, simulation and optimization of a mixed-mode solar dryer based on the climatic data of location Kigali and mangoes were used as a reference product. The model was simulated using TRNSYS software for thermal analysis and the results was shown on a graph which presents the useful temperature gain for drying. The results were used for solar drying simulation to evaluate its performance in terms of drying rate, here MATLAB was utilized for this. It is clear on the graph how the moisture content of mangoes decreases with time up to 10%, which is their equilibrium moisture level for safe storage. The optimization of the model was further done with the modification of the solar dryer by making the front wall of the drying chamber with a glass which adds a greenhouse effect, hence a further increase in drying temperature. The solar drying simulation was again carried out and a clear difference in drying time was observed in the drying rate graph where the time of moisture content removal was reduced from 24 hours to 10 hours.
    VL  - 5
    IS  - 6
    ER  - 

    Copy | Download

  • Sections