Science Journal of Energy Engineering

| Peer-Reviewed |

Determination of the Solar Cell Optimal Junction Recombination Velocity Using Hybrid Method

Received: 16 September 2019    Accepted: 05 October 2019    Published: 20 October 2019
Views:       Downloads:

Share This Article

Abstract

In this paper we present a technique for determining the optimum junction recombination velocity of a solar cell, using a combination of the electrical equivalent model, and the finite element method. Starting from the continuity equation that describes the solar cell operation solved in one dimension by the finite element method, the excess minority carrier’s density is determined. From this density, the photocurrent, the photovoltage and the power produced by the solar cell are determined. The photocurrent and the photovoltage are represented according to the junction recombination velocity, as well as the solar cell power versus the photovoltage, for various values of the series resistance. In considering its equivalent electrical model, the solar cell is modeled and simulated with Matlab/Simulink. In this simulation model, the capacitor initially discharged, charges under the effect of the solar cell. Its impedance varying according to time, represents the load resistance which corresponds to an operating point of the solar cell. During the capacitor charge process for various values of the series resistance, we obtain the current-voltage characteristic of the solar cell in order to highlight the series resistance effects on the solar cell power. From the optimal value of the power, and that of solar cell photovoltage obtained by simulating the solar cell using Matlab/Simulink, the value of the junction recombination velocity corresponding to the maximum value of the solar cell power is determined numerically, for various values of the series resistance.

DOI 10.11648/j.sjee.20190703.12
Published in Science Journal of Energy Engineering (Volume 7, Issue 3, September 2019)
Page(s) 39-44
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Solar Cell, Junction Recombination Velocity, Finite Element, Series Resistance, Photocurrent, Photovoltage, Optimal Power

References
[1] Nzonzolo, Lilonga-Boyenga D. Sissoko G. 2014, Illumination level effects on microscopic and macroscopic parameters of a bifacial solar cell. Energy and Power Engineering, 6, pp. 25-36, 2014.
[2] Nzonzolo. Détermination des paramètres de recombinaison à partir de l’étude de la caractéristique courant-tension d’une photopile bifaciale sous éclairement constant. Thèse de Doctorat 3eme cycle. Université Cheikh Anta Diop. Dakar. Sénégal, 2004.
[3] Nanema E. Modélisation d’une photopile bifaciale au silicium: Méthodes de détermination des paramètres des paramètres de recombinaison: Thèse de Doctorat troisième cycle. Université Cheikh Anta Diop. Dakar Sénégal 1996.
[4] Ould El Moujtaba M. A. Ndiaye M. Diao A. Thiame M. Barro I. F. and Sissoko G. Theorical study of the Influence of Irradiation on Solar Cell Under Multispectral Illumination. Research Journal of applied Sciences Engineering and Technology 4 (23) pp. 5068-5073, 2012.
[5] Sayad Y., Détermination de la longueur de diffusion des porteurs de charge minoritaires dans le silicium cristallin par interaction lumière matière. Thèse de doctorat. Institut National des Sciences Appliquées de Lyon. 2009. France.
[6] Ly I., Lemrabott O. H. Dieng B. Gaye I. Gueye S. Diouf M. S. and Sissoko G.. 2012. Techniques de détermination des paramètres de recombinaison et le domaine de leur validité d‘une photopile bifaciale au silicium polycristallin sous éclairement multi spectral constant en régime statique. Revue des Energies Renouvelables Vol. 15. N°2 187-206.
[7] Mohammad S. N. An Alternative Method for the Performance Analysis of Silicon Solar Cells. J. Appl. Phys. 61 (2). pp. 767-772, 1987.
[8] Nzonzolo. Contribution à la Caractérisation d’une Photopile Poly cristalline au Silicium par la Méthode des Eléments Finis. Thèse de doctorat unique. Université Marien NGOUABI. ENSP, Brazzaville Congo. 2017.
[9] Nzonzolo, Desire Lilonga-Boyenga. Camille N. Mabika and Gregoire Sissoko. Characterization of a Bifacial Silicon Solar Cell Under Multispectral Steady State Illumination Using Finite Element Method. Progress In Electromagnetics Research M. Vol. 53. Pp. 131–140, 2017.
[10] Nzonzolo. Désiré Lilonga-Boyenga. Camille Nziengui Mabika. Grégoire Sissoko. Two-Dimensional Finite Element Method Analysis Effect of the Recombination Velocity at the Grain Boundaries on the Characteristics of a Polycrystalline Silicon Solar Cell. Circuits and Systems. 7. Pp. 4186-4200, 2016.
[11] Daveau Christian. cours methodes des elements finis 2010/2011: Universite de Cergy-Pontoise. Departement de mathematique. 95302. Cergy-Pontoise. cedex France.
[12] Matthew N. O. Sadiku. 2001. Numerical Techniques in Electromagnetics (Second Edition) CRC Press LLC. Boca Raton London. New York. Washington. D. C.
[13] Dione M. M., Ly I., Diao A., Gueye S., Gueye A., Thiame M., Sissoko G., Determination Of The Impact Of The Grain Size And The Recombination Velocity At Grain Boundary On The Values Of The Electrical Parameters Of A Bifacial Polycristallin Silicon Solar Cell, Engineering Science and Technology: An International Journal (ESTIJ), Vol. 3, No. 1, P. 66-73, 2013.
[14] Gueye S., Ly Diallo H., Ndiaye M., Dione M. M., Sissoko G., 2013, Effect of the Boundary Recombination Velocity and the Grain Size at the Phenomenological Parameters of the Monofacial Solar Cells under Multispectral Illumination in Steady State, International Journal of Emerging Technology and Advanced Engineering, Volume 3, Issue 12, P. 1-8, 2013.
[15] Matar Gueye, Hawa Ly Diallo1, Attoumane Kosso Mamadou Moustapha, Youssou Traore, Ibrahima Diatta, Gregoire Sissoko: Ac Recombination Velocity in a Lamella Silicon Solar Cell, World Journal of Condensed Matter Physics, 8, 185-196, 2018.
[16] Mint Sidihanena Selma, Ibrahima Diatta, Youssou Traore, Marce Sitor Diouf, Lemrabottould Habiboulahh, Mamadou Wade, Grégoire Sissoko: Diffusion capacitance in a silicon solar cell under frequency modulated illumination: Magnetic field and temperature effects, Journal of Scientific and Engineering Research, 5 (7): 317-324, 2018.
Author Information
  • Polytechnical Superior National School ENSP, Marien Ngouabi University, Brazzaville, Congo

  • Polytechnical Superior National School ENSP, Marien Ngouabi University, Brazzaville, Congo

  • Polytechnical Superior National School ENSP, Marien Ngouabi University, Brazzaville, Congo

  • Polytechnical Superior National School ENSP, Marien Ngouabi University, Brazzaville, Congo

Cite This Article
  • APA Style

    Nzonzolo, Ibondji Mwaziby Nionsi, Louis Okotaka Ebale, Desire Lilonga-Boyenga. (2019). Determination of the Solar Cell Optimal Junction Recombination Velocity Using Hybrid Method. Science Journal of Energy Engineering, 7(3), 39-44. https://doi.org/10.11648/j.sjee.20190703.12

    Copy | Download

    ACS Style

    Nzonzolo; Ibondji Mwaziby Nionsi; Louis Okotaka Ebale; Desire Lilonga-Boyenga. Determination of the Solar Cell Optimal Junction Recombination Velocity Using Hybrid Method. Sci. J. Energy Eng. 2019, 7(3), 39-44. doi: 10.11648/j.sjee.20190703.12

    Copy | Download

    AMA Style

    Nzonzolo, Ibondji Mwaziby Nionsi, Louis Okotaka Ebale, Desire Lilonga-Boyenga. Determination of the Solar Cell Optimal Junction Recombination Velocity Using Hybrid Method. Sci J Energy Eng. 2019;7(3):39-44. doi: 10.11648/j.sjee.20190703.12

    Copy | Download

  • @article{10.11648/j.sjee.20190703.12,
      author = {Nzonzolo and Ibondji Mwaziby Nionsi and Louis Okotaka Ebale and Desire Lilonga-Boyenga},
      title = {Determination of the Solar Cell Optimal Junction Recombination Velocity Using Hybrid Method},
      journal = {Science Journal of Energy Engineering},
      volume = {7},
      number = {3},
      pages = {39-44},
      doi = {10.11648/j.sjee.20190703.12},
      url = {https://doi.org/10.11648/j.sjee.20190703.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.sjee.20190703.12},
      abstract = {In this paper we present a technique for determining the optimum junction recombination velocity of a solar cell, using a combination of the electrical equivalent model, and the finite element method. Starting from the continuity equation that describes the solar cell operation solved in one dimension by the finite element method, the excess minority carrier’s density is determined. From this density, the photocurrent, the photovoltage and the power produced by the solar cell are determined. The photocurrent and the photovoltage are represented according to the junction recombination velocity, as well as the solar cell power versus the photovoltage, for various values of the series resistance. In considering its equivalent electrical model, the solar cell is modeled and simulated with Matlab/Simulink. In this simulation model, the capacitor initially discharged, charges under the effect of the solar cell. Its impedance varying according to time, represents the load resistance which corresponds to an operating point of the solar cell. During the capacitor charge process for various values of the series resistance, we obtain the current-voltage characteristic of the solar cell in order to highlight the series resistance effects on the solar cell power. From the optimal value of the power, and that of solar cell photovoltage obtained by simulating the solar cell using Matlab/Simulink, the value of the junction recombination velocity corresponding to the maximum value of the solar cell power is determined numerically, for various values of the series resistance.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Determination of the Solar Cell Optimal Junction Recombination Velocity Using Hybrid Method
    AU  - Nzonzolo
    AU  - Ibondji Mwaziby Nionsi
    AU  - Louis Okotaka Ebale
    AU  - Desire Lilonga-Boyenga
    Y1  - 2019/10/20
    PY  - 2019
    N1  - https://doi.org/10.11648/j.sjee.20190703.12
    DO  - 10.11648/j.sjee.20190703.12
    T2  - Science Journal of Energy Engineering
    JF  - Science Journal of Energy Engineering
    JO  - Science Journal of Energy Engineering
    SP  - 39
    EP  - 44
    PB  - Science Publishing Group
    SN  - 2376-8126
    UR  - https://doi.org/10.11648/j.sjee.20190703.12
    AB  - In this paper we present a technique for determining the optimum junction recombination velocity of a solar cell, using a combination of the electrical equivalent model, and the finite element method. Starting from the continuity equation that describes the solar cell operation solved in one dimension by the finite element method, the excess minority carrier’s density is determined. From this density, the photocurrent, the photovoltage and the power produced by the solar cell are determined. The photocurrent and the photovoltage are represented according to the junction recombination velocity, as well as the solar cell power versus the photovoltage, for various values of the series resistance. In considering its equivalent electrical model, the solar cell is modeled and simulated with Matlab/Simulink. In this simulation model, the capacitor initially discharged, charges under the effect of the solar cell. Its impedance varying according to time, represents the load resistance which corresponds to an operating point of the solar cell. During the capacitor charge process for various values of the series resistance, we obtain the current-voltage characteristic of the solar cell in order to highlight the series resistance effects on the solar cell power. From the optimal value of the power, and that of solar cell photovoltage obtained by simulating the solar cell using Matlab/Simulink, the value of the junction recombination velocity corresponding to the maximum value of the solar cell power is determined numerically, for various values of the series resistance.
    VL  - 7
    IS  - 3
    ER  - 

    Copy | Download

  • Sections