The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana

Kofi Asante-Kyei

doi:doi:10.11648/j.her.20190402.12

| Peer-Reviewed

The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana

Kofi Asante-Kyei

Published in Higher Education Research (Volume 4, Issue 2)

Received: 1 April 2019 Accepted: 9 May 2019 Published: 5 June 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Of late, there have been challenges facing the Ceramic Industry in Ghana that are affecting the study of ceramics in Ghanaian ceramic education, especially tertiary education. Therefore, this study seeks to examine and discuss the impact of the challenges of Ghana’s ceramic industry on ceramic education in Ghana. The population of the study comprised students, lecturers and heads of department of selected ceramic education tertiary institutions in Ghana as well as stakeholders in Ghana’s ceramic factories. The methodology employed was the qualitative approach and the descriptive survey. The research instruments used to gather data were interview and observation. It was found among others, that the establishment of metal and plastic factories in Ghana and the importation of metallic and plastic plates, blenders, metallic cooking pots and plastic buckets into the country have contributed to the reduction of intake of ceramic students in ceramic education institutions. The study recommends among others that, the government of Ghana should protect indigenous industries by means of tax incentives, invest in local ceramic industries by giving subsidies for the acquisition of new machinery, equipment, human resources and manpower development. Additionally, measures should be put in place for the provision of logistics and equipment to facilitate teaching and learning to make the ceramic graduate marketable and employable.

Published in	Higher Education Research (Volume 4, Issue 2)
DOI	10.11648/j.her.20190402.12
Page(s)	30-35
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Ceramic Industry, Ceramic Education, Challenges and Obsolete

References

[1]	Tamakloe, C. (2014, May 13). “Challenges facing Ghana’s Ceramic Industry”. (Kofi Asante-Kyei, Interviewer).
[2]	Ministry of Trade and Industry-Ghana (2004). Report on the Survey of Medium and Large Manufacturing. Accra: Government of Ghana.
[3]	Nsiah, J. (2014, September 15). “Challenges facing Ghana’s Ceramic Industry”. (Kofi Asante-Kyei, Interviewer).
[4]	Quartey, P. (2006). “Textiles in Ghana. In the Textiles and Clothing Industry in Ghana” (p.2). Accra, Ghana: Fiedrich-Ebert-Stiftung. BIBIOGRAPHY /11033.
[5]	Happy, G. (2013, September, 6). “China Quietly Usurps African Ceramic Market.” (Kofi Asante-Kyei, Interviewer).
[6]	Ekem, R. C. (2014, August 18). “Challenges facing Ghana’s Ceramic Industry”. (Kofi Asante-Kyei, Interviewer).
[7]	Wadsworth, C. (2005). “Sampling Methods: Purposive Sampling in Research Methods.” New York: Cengage Learning. (p.29).
[8]	Lokko, E. (2014, July, 20). “The Implications of the challenges facing Ghana’s Ceramic Industry”. (Kofi Asante-Kyei, Interviewer).
[9]	(Field survey, 2015). “A Visit by the Researcher to certain Ceramic Industries in Ghana”. (Kofi Asante-Kyei, Researcher).
[10]	(Field survey, August 2017). “Interviews Conducted On Selected Institutions” (Kofi Asante-Kyei, Researcher).
[11]	Lall, S. (1995). Structural Adjustment and African Industry. World Development: Vol.23, No 12, p.226.
[12]	Ministry of Education, Science and Sports, Ghana. (2008). Ceramic Education in Ghana. In Teaching Syllabus for Ceramics: SHS 2-4 (p. x). Accra: Government of Ghana.

Cite This Article

Plain Text BibTeX RIS

APA Style

Kofi Asante-Kyei. (2019). The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana. Higher Education Research, 4(2), 30-35. https://doi.org/10.11648/j.her.20190402.12

Copy | Download

ACS Style

Kofi Asante-Kyei. The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana. High. Educ. Res. 2019, 4(2), 30-35. doi: 10.11648/j.her.20190402.12

Copy | Download

AMA Style

Kofi Asante-Kyei. The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana. High Educ Res. 2019;4(2):30-35. doi: 10.11648/j.her.20190402.12

Copy | Download

@article{10.11648/j.her.20190402.12,
  author = {Kofi Asante-Kyei},
  title = {The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana},
  journal = {Higher Education Research},
  volume = {4},
  number = {2},
  pages = {30-35},
  doi = {10.11648/j.her.20190402.12},
  url = {https://doi.org/10.11648/j.her.20190402.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.her.20190402.12},
  abstract = {Of late, there have been challenges facing the Ceramic Industry in Ghana that are affecting the study of ceramics in Ghanaian ceramic education, especially tertiary education. Therefore, this study seeks to examine and discuss the impact of the challenges of Ghana’s ceramic industry on ceramic education in Ghana. The population of the study comprised students, lecturers and heads of department of selected ceramic education tertiary institutions in Ghana as well as stakeholders in Ghana’s ceramic factories. The methodology employed was the qualitative approach and the descriptive survey. The research instruments used to gather data were interview and observation. It was found among others, that the establishment of metal and plastic factories in Ghana and the importation of metallic and plastic plates, blenders, metallic cooking pots and plastic buckets into the country have contributed to the reduction of intake of ceramic students in ceramic education institutions. The study recommends among others that, the government of Ghana should protect indigenous industries by means of tax incentives, invest in local ceramic industries by giving subsidies for the acquisition of new machinery, equipment, human resources and manpower development. Additionally, measures should be put in place for the provision of logistics and equipment to facilitate teaching and learning to make the ceramic graduate marketable and employable.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana
AU  - Kofi Asante-Kyei
Y1  - 2019/06/05
PY  - 2019
N1  - https://doi.org/10.11648/j.her.20190402.12
DO  - 10.11648/j.her.20190402.12
T2  - Higher Education Research
JF  - Higher Education Research
JO  - Higher Education Research
SP  - 30
EP  - 35
PB  - Science Publishing Group
SN  - 2578-935X
UR  - https://doi.org/10.11648/j.her.20190402.12
AB  - Of late, there have been challenges facing the Ceramic Industry in Ghana that are affecting the study of ceramics in Ghanaian ceramic education, especially tertiary education. Therefore, this study seeks to examine and discuss the impact of the challenges of Ghana’s ceramic industry on ceramic education in Ghana. The population of the study comprised students, lecturers and heads of department of selected ceramic education tertiary institutions in Ghana as well as stakeholders in Ghana’s ceramic factories. The methodology employed was the qualitative approach and the descriptive survey. The research instruments used to gather data were interview and observation. It was found among others, that the establishment of metal and plastic factories in Ghana and the importation of metallic and plastic plates, blenders, metallic cooking pots and plastic buckets into the country have contributed to the reduction of intake of ceramic students in ceramic education institutions. The study recommends among others that, the government of Ghana should protect indigenous industries by means of tax incentives, invest in local ceramic industries by giving subsidies for the acquisition of new machinery, equipment, human resources and manpower development. Additionally, measures should be put in place for the provision of logistics and equipment to facilitate teaching and learning to make the ceramic graduate marketable and employable.
VL  - 4
IS  - 2
ER  -

Copy | Download

Author Information

Kofi Asante-Kyei

Department of Ceramic Technology, Takoradi Technical University, Takoradi, Ghana

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Kofi Asante-Kyei. (2019). The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana. Higher Education Research, 4(2), 30-35. https://doi.org/10.11648/j.her.20190402.12

Copy | Download

ACS Style

Kofi Asante-Kyei. The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana. High. Educ. Res. 2019, 4(2), 30-35. doi: 10.11648/j.her.20190402.12

Copy | Download

AMA Style

Kofi Asante-Kyei. The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana. High Educ Res. 2019;4(2):30-35. doi: 10.11648/j.her.20190402.12

Copy | Download

@article{10.11648/j.her.20190402.12,
  author = {Kofi Asante-Kyei},
  title = {The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana},
  journal = {Higher Education Research},
  volume = {4},
  number = {2},
  pages = {30-35},
  doi = {10.11648/j.her.20190402.12},
  url = {https://doi.org/10.11648/j.her.20190402.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.her.20190402.12},
  abstract = {Of late, there have been challenges facing the Ceramic Industry in Ghana that are affecting the study of ceramics in Ghanaian ceramic education, especially tertiary education. Therefore, this study seeks to examine and discuss the impact of the challenges of Ghana’s ceramic industry on ceramic education in Ghana. The population of the study comprised students, lecturers and heads of department of selected ceramic education tertiary institutions in Ghana as well as stakeholders in Ghana’s ceramic factories. The methodology employed was the qualitative approach and the descriptive survey. The research instruments used to gather data were interview and observation. It was found among others, that the establishment of metal and plastic factories in Ghana and the importation of metallic and plastic plates, blenders, metallic cooking pots and plastic buckets into the country have contributed to the reduction of intake of ceramic students in ceramic education institutions. The study recommends among others that, the government of Ghana should protect indigenous industries by means of tax incentives, invest in local ceramic industries by giving subsidies for the acquisition of new machinery, equipment, human resources and manpower development. Additionally, measures should be put in place for the provision of logistics and equipment to facilitate teaching and learning to make the ceramic graduate marketable and employable.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - The Challenges Facing Ceramic Industries in Ghana: Its Impact on Ceramic Education in Ghana
AU  - Kofi Asante-Kyei
Y1  - 2019/06/05
PY  - 2019
N1  - https://doi.org/10.11648/j.her.20190402.12
DO  - 10.11648/j.her.20190402.12
T2  - Higher Education Research
JF  - Higher Education Research
JO  - Higher Education Research
SP  - 30
EP  - 35
PB  - Science Publishing Group
SN  - 2578-935X
UR  - https://doi.org/10.11648/j.her.20190402.12
AB  - Of late, there have been challenges facing the Ceramic Industry in Ghana that are affecting the study of ceramics in Ghanaian ceramic education, especially tertiary education. Therefore, this study seeks to examine and discuss the impact of the challenges of Ghana’s ceramic industry on ceramic education in Ghana. The population of the study comprised students, lecturers and heads of department of selected ceramic education tertiary institutions in Ghana as well as stakeholders in Ghana’s ceramic factories. The methodology employed was the qualitative approach and the descriptive survey. The research instruments used to gather data were interview and observation. It was found among others, that the establishment of metal and plastic factories in Ghana and the importation of metallic and plastic plates, blenders, metallic cooking pots and plastic buckets into the country have contributed to the reduction of intake of ceramic students in ceramic education institutions. The study recommends among others that, the government of Ghana should protect indigenous industries by means of tax incentives, invest in local ceramic industries by giving subsidies for the acquisition of new machinery, equipment, human resources and manpower development. Additionally, measures should be put in place for the provision of logistics and equipment to facilitate teaching and learning to make the ceramic graduate marketable and employable.
VL  - 4
IS  - 2
ER  -

Copy | Download