Implementation of Microstrip Patch Antenna for Wi-Fi Applications

Swe Zin Nyunt

doi:doi:10.11648/j.ajcst.20180103.12

| Peer-Reviewed |

Implementation of Microstrip Patch Antenna for Wi-Fi Applications

Swe Zin Nyunt

Received: 3 November 2018 Accepted: 16 November 2018 Published: 26 December 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In recent years, the inventions in communication systems require the design of low cost, minimal weight, compact and low profile antennas which are capable of main-taining high performance. This research covers the study of basics and fundamentals of the microstrip patch antenna. The aim of this work is to design the microstrip patch antenna for Wi-Fi applications which operates at 2.4 GHz. The simulation of the proposed antenna was done with the aid of the computer simulation technology (CST) microwave studio student version 2017. The substrate used for the proposed antenna is the flame resistant four (FR-4) with a dielectric constant of 4.4 and a loss tangent of 0.025. The proposed MSA is fed by the coaxial probe. The proposed antenna may find applications in wireless local area network (Wi-Fi) and Bluetooth technology. And the work is the design of a Hexagonal shaped microstrip patch antenna which is presented for the wireless communication applications such as Wi-Fi in S-band. The designed microstrip patch antenna consists of a hexagonal patch which is found to be resonant at the frequency of 2.397 GHz with the return loss of -31.2118 dB having satisfactory radiation properties. The proposed antenna is the compact design of 28.2842mm 48.2842mm area on the FR4-epoxy substrate with dielectric constant of 4.4 and thickness of 1.6. The designed antenna has the realized gain of 3.42 dB at the resonant frequency of 2.397 GHz. After simulating with the CST software, the patch antenna was fabricated using the MITS milling machine on the FR-4 substrate in the YTU’s communication lab. The fabricated antenna was measured by the Vector Network Analyzer. Then, the simulation and measurement results were compared. The designed antenna structure is planar, simple and compact since it can be easily embedded for Wi-Fi applications, cellular phones and wireless communications for low manufacturing cost.

DOI	10.11648/j.ajcst.20180103.12
Published in	American Journal of Computer Science and Technology (Volume 1, Issue 3, September 2018)
Page(s)	63-73
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Microstrip Patch Antenna, Wifi Application, Electromagnetcis, Fabrication, Computer Technology

References

[1]	Annonymous (2018). Microstrip patch Antenna.
[2]	AntennaTheory.com (2018). Microstrip antenna. Page Version ID: 855888718.
[3]	Balanis, C. A. (2005). Antenna Theory: Analysis and Design, 3rd Edition. Wiley-Interscience, Hoboken, NJ, 3 edition edition.
[4]	Bhunia, S. (2014). Microstrip Patch Antenna Design: A Novel Approach. LAP LAMBERT Academic Publishing, S. l.
[5]	CST (2017). CST STUDIO SUITE Student Edition.
[6]	em: talk (2018). Geometry of rectangular microstrip antenna.
[7]	Hemant Kumar Varshney, Mukesh Kumar (2014). Design Characterization of Rectangular Microstrip Patch Antenna for Wi-Fi Application - Inpressco.
[8]	K. Dinakaran, M. Vajikabanu, M. Piriyadharsini, D. Rajeshwari (2016). Design of Microstrip Patch Antenna For Wi-Fi Applications.
[9]	Narayana, M. V., Immadi, G., Rajkamal, K., Tejaswi, M. S. R. S., Raviteja, V., Chaitanya, A. K., and Rao, B. B. (2012). Microstrip Patch Antenna for C-band RADAR applications with Coaxial fed.
[10]	Patchantennablogspot.com (2018). Voltage, Cur-rent and Impedance along the patch’s resonant length.
[11]	Petros, A., Zafar, I., and Licul, S. (2003). Reviewing SDARS antenna requirements. icrowaves and Rf, 42: 51–62.
[12]	Ramesh Garg, Prakash Bhartia (2001). Microstrip antenna design handbook /.
[13]	Research Gate (2018a). Aperture Coupled Feeding.
[14]	Research Gate (2018b). Effective length of microstrip patch antenna.
[15]	Research Gate (2018c). Microstrip Line and Electric Field lines.
[16]	Research Gate (2018d). Proximity Coupled Feeding.
[17]	S. ANUSHA, Y. (2017). Hexagonal Shaped Micro-strip Patch Antenna for Wi-Fi Application, volume Vol. 5, Issue 3. Y. Balaraju.
[18]	Shodhganga Inflibnet.ac (2009). Substrate Material Selection and its importance.
[19]	Shumba, P. (2017). Design and characterization of a microstrip patch antenna for Wi-Fi. Koteswa, Anusha.
[20]	Slideshare.net (2018). Basic microstrip patch antenna shapes.
[21]	Springer Link (2018). Microstrip Line Feeding.
[22]	Stutzman, W. L. and Thiele, G. A. (2013). Antenna Theory and Design. John Wiley & Sons. Google-Books-ID: xhZRA1K57wIC.
[23]	Tutorials Point (2018). Antenna pattern with main, back, and side lobes.
[24]	Weng, Z., Guo, D., Wu, Y., Li, M., Hu, J., Zeng, W., Li, X., and Zeng, S. (2015). A 2.45ghz microstrip patch antenna evolved for WiFi application. In 2015 IEEE Congress on Evolutionary Computation (CEC), pages 1191–1195.
[25]	Wiki (2018). Microstrip antenna wiki.com.
[26]	Wong, K.-L. (2004). Design of Nonplanar Microstrip Antennas and Transmission Lines. John Wiley & Sons.
[27]	Wong, K.-L., Liu, Y.-H., and Huang, C.-Y. (1994). Generalized transmission-line model for cylindrical-rectangular microstrip antennas. Microwave and Optical Technology Letters, 7(16): 729–732.
[28]	www.radartutorial.eu (2018). Radar Basics Patch Antennas.

Cite This Article

Plain Text BibTeX RIS

APA Style

Swe Zin Nyunt. (2018). Implementation of Microstrip Patch Antenna for Wi-Fi Applications. American Journal of Computer Science and Technology, 1(3), 63-73. https://doi.org/10.11648/j.ajcst.20180103.12

Copy | Download

ACS Style

Swe Zin Nyunt. Implementation of Microstrip Patch Antenna for Wi-Fi Applications. Am. J. Comput. Sci. Technol. 2018, 1(3), 63-73. doi: 10.11648/j.ajcst.20180103.12

Copy | Download

AMA Style

Swe Zin Nyunt. Implementation of Microstrip Patch Antenna for Wi-Fi Applications. Am J Comput Sci Technol. 2018;1(3):63-73. doi: 10.11648/j.ajcst.20180103.12

Copy | Download

@article{10.11648/j.ajcst.20180103.12,
  author = {Swe Zin Nyunt},
  title = {Implementation of Microstrip Patch Antenna for Wi-Fi Applications},
  journal = {American Journal of Computer Science and Technology},
  volume = {1},
  number = {3},
  pages = {63-73},
  doi = {10.11648/j.ajcst.20180103.12},
  url = {https://doi.org/10.11648/j.ajcst.20180103.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajcst.20180103.12},
  abstract = {In recent years, the inventions in communication systems require the design of low cost, minimal weight, compact and low profile antennas which are capable of main-taining high performance. This research covers the study of basics and fundamentals of the microstrip patch antenna. The aim of this work is to design the microstrip patch antenna for Wi-Fi applications which operates at 2.4 GHz. The simulation of the proposed antenna was done with the aid of the computer simulation technology (CST) microwave studio student version 2017. The substrate used for the proposed antenna is the flame resistant four (FR-4) with a dielectric constant of 4.4 and a loss tangent of 0.025. The proposed MSA is fed by the coaxial probe. The proposed antenna may find applications in wireless local area network (Wi-Fi) and Bluetooth technology. And the work is the design of a Hexagonal shaped microstrip patch antenna which is presented for the wireless communication applications such as Wi-Fi in S-band. The designed microstrip patch antenna consists of a hexagonal patch which is found to be resonant at the frequency of 2.397 GHz with the return loss of -31.2118 dB having satisfactory radiation properties. The proposed antenna is the compact design of 28.2842mm 48.2842mm area on the FR4-epoxy substrate with dielectric constant of 4.4 and thickness of 1.6. The designed antenna has the realized gain of 3.42 dB at the resonant frequency of 2.397 GHz. After simulating with the CST software, the patch antenna was fabricated using the MITS milling machine on the FR-4 substrate in the YTU’s communication lab. The fabricated antenna was measured by the Vector Network Analyzer. Then, the simulation and measurement results were compared. The designed antenna structure is planar, simple and compact since it can be easily embedded for Wi-Fi applications, cellular phones and wireless communications for low manufacturing cost.},
 year = {2018}
}

Copy | Download

TY - JOUR
T1 - Implementation of Microstrip Patch Antenna for Wi-Fi Applications
AU - Swe Zin Nyunt
Y1 - 2018/12/26
PY - 2018
N1 - https://doi.org/10.11648/j.ajcst.20180103.12
DO - 10.11648/j.ajcst.20180103.12
T2 - American Journal of Computer Science and Technology
JF - American Journal of Computer Science and Technology
JO - American Journal of Computer Science and Technology
SP - 63
EP - 73
PB - Science Publishing Group
SN - 2640-012X
UR - https://doi.org/10.11648/j.ajcst.20180103.12
AB - In recent years, the inventions in communication systems require the design of low cost, minimal weight, compact and low profile antennas which are capable of main-taining high performance. This research covers the study of basics and fundamentals of the microstrip patch antenna. The aim of this work is to design the microstrip patch antenna for Wi-Fi applications which operates at 2.4 GHz. The simulation of the proposed antenna was done with the aid of the computer simulation technology (CST) microwave studio student version 2017. The substrate used for the proposed antenna is the flame resistant four (FR-4) with a dielectric constant of 4.4 and a loss tangent of 0.025. The proposed MSA is fed by the coaxial probe. The proposed antenna may find applications in wireless local area network (Wi-Fi) and Bluetooth technology. And the work is the design of a Hexagonal shaped microstrip patch antenna which is presented for the wireless communication applications such as Wi-Fi in S-band. The designed microstrip patch antenna consists of a hexagonal patch which is found to be resonant at the frequency of 2.397 GHz with the return loss of -31.2118 dB having satisfactory radiation properties. The proposed antenna is the compact design of 28.2842mm 48.2842mm area on the FR4-epoxy substrate with dielectric constant of 4.4 and thickness of 1.6. The designed antenna has the realized gain of 3.42 dB at the resonant frequency of 2.397 GHz. After simulating with the CST software, the patch antenna was fabricated using the MITS milling machine on the FR-4 substrate in the YTU’s communication lab. The fabricated antenna was measured by the Vector Network Analyzer. Then, the simulation and measurement results were compared. The designed antenna structure is planar, simple and compact since it can be easily embedded for Wi-Fi applications, cellular phones and wireless communications for low manufacturing cost.
VL - 1
IS - 3
ER -

Copy | Download

Author Information

Swe Zin Nyunt

Department of Electronic Engineering, Yangon Technological University, Yangon, Republic of the Union of Myanmar

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Swe Zin Nyunt. (2018). Implementation of Microstrip Patch Antenna for Wi-Fi Applications. American Journal of Computer Science and Technology, 1(3), 63-73. https://doi.org/10.11648/j.ajcst.20180103.12

Copy | Download

ACS Style

Swe Zin Nyunt. Implementation of Microstrip Patch Antenna for Wi-Fi Applications. Am. J. Comput. Sci. Technol. 2018, 1(3), 63-73. doi: 10.11648/j.ajcst.20180103.12

Copy | Download

AMA Style

Swe Zin Nyunt. Implementation of Microstrip Patch Antenna for Wi-Fi Applications. Am J Comput Sci Technol. 2018;1(3):63-73. doi: 10.11648/j.ajcst.20180103.12

Copy | Download

@article{10.11648/j.ajcst.20180103.12,
  author = {Swe Zin Nyunt},
  title = {Implementation of Microstrip Patch Antenna for Wi-Fi Applications},
  journal = {American Journal of Computer Science and Technology},
  volume = {1},
  number = {3},
  pages = {63-73},
  doi = {10.11648/j.ajcst.20180103.12},
  url = {https://doi.org/10.11648/j.ajcst.20180103.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajcst.20180103.12},
  abstract = {In recent years, the inventions in communication systems require the design of low cost, minimal weight, compact and low profile antennas which are capable of main-taining high performance. This research covers the study of basics and fundamentals of the microstrip patch antenna. The aim of this work is to design the microstrip patch antenna for Wi-Fi applications which operates at 2.4 GHz. The simulation of the proposed antenna was done with the aid of the computer simulation technology (CST) microwave studio student version 2017. The substrate used for the proposed antenna is the flame resistant four (FR-4) with a dielectric constant of 4.4 and a loss tangent of 0.025. The proposed MSA is fed by the coaxial probe. The proposed antenna may find applications in wireless local area network (Wi-Fi) and Bluetooth technology. And the work is the design of a Hexagonal shaped microstrip patch antenna which is presented for the wireless communication applications such as Wi-Fi in S-band. The designed microstrip patch antenna consists of a hexagonal patch which is found to be resonant at the frequency of 2.397 GHz with the return loss of -31.2118 dB having satisfactory radiation properties. The proposed antenna is the compact design of 28.2842mm 48.2842mm area on the FR4-epoxy substrate with dielectric constant of 4.4 and thickness of 1.6. The designed antenna has the realized gain of 3.42 dB at the resonant frequency of 2.397 GHz. After simulating with the CST software, the patch antenna was fabricated using the MITS milling machine on the FR-4 substrate in the YTU’s communication lab. The fabricated antenna was measured by the Vector Network Analyzer. Then, the simulation and measurement results were compared. The designed antenna structure is planar, simple and compact since it can be easily embedded for Wi-Fi applications, cellular phones and wireless communications for low manufacturing cost.},
 year = {2018}
}

Copy | Download