Evaluation of the Savonius Wind Rotor Performance for Different External Overlap Ratios
International Journal of Fluid Mechanics & Thermal Sciences
Volume 1, Issue 1, April 2015, Pages: 14-19
Received: Apr. 15, 2015;
Accepted: Apr. 27, 2015;
Published: May 5, 2015
Views 4311 Downloads 165
Zied Driss, Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax, Sfax, Tunisia
Ali Damak, Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax, Sfax, Tunisia
Mohamed Salah Abid, Laboratory of Electro-Mechanic Systems (LASEM), National School of Engineers of Sfax (ENIS), University of Sfax, Sfax, Tunisia
Experimental investigations were carried out to study the external overlap ratios effect on the performance of a vertical axis wind rotor of the Savonius type. For thus, an open wind tunnel has been designed and realized in Laboratory of Electro-Mechanic Systems at National School of Engineers of Sfax. This involved also the instrumentation and the necessary equipment for the global characterization of the Savonius wind rotor. Particularly, this research required the setting up of four mounting characterized by different external overlap ratios. The overall performance evaluation of the rotor has been based on the power and dynamic torque coefficients in function of the air velocity speed measured in the test vein of the wind tunnel.
Mohamed Salah Abid,
Evaluation of the Savonius Wind Rotor Performance for Different External Overlap Ratios, International Journal of Fluid Mechanics & Thermal Sciences.
Vol. 1, No. 1,
2015, pp. 14-19.
D’Alessandro, V., Montelpare, S., Ricci, R., Secchiaroli, A., 2010, Unsteady Aerodynamics of a Savonius wind rotor: a new computational approach for the simulation of energy performance, Energy, 35, 3349-3363.
Altan, B.D., Atilgan, M., Özdamar, A., 2008, An experimental study on improvement of a Savonius rotor performance with curtaining, Experimental Thermal and Fluid Science, 32, 1673-1678.
Irabu, K., Roy, J.N., 2007, Characteristics of wind power on Savonius rotor using a guide-box tunnel, Experimental Thermal and Fluid Science, 32, 580-586.
Saha, U.K., Thotla, S., Maity, D., 2008, Optimum design configuration of Savonius rotor through wind tunnel experiments, Journal of Wind Engineering and Industrial Aerodynamics, 96, 1359-1375.
Fujisawa, N., 1996, Velocity measurements and numerical calculations of flow fields in and around Savonius rotors, Journal of Wind Engineering and Industrial Aerodynamics, 59, 39-50.
Al-Bahadly, I., 2009, Building a wind turbine for rural home, Energy for Sustainable Development, 13, 159-165.
Dobreva, I., Massouh, F., 2011, CFD and PIV investigation of unsteady flow through Savonius wind turbine, Energy Procedia, 6, 711-720.
Saha UK, M. Jaya Rajkumar, On the performance analysis of Savonius rotor with twisted blades, Renewable Energy 31 (2006) 1776-1788.
Saha, U.K., Thotla, S., Maity D., 2008, Optimum design configuration of Savonius rotor through wind tunnel experiments. Journal of Wind Engineering and Industrial Aerodynamics 96, 1359-1375.
Sabzevari, A., 1978, Power augmentation in a ducted Savonius rotor, Second international symposium on wind energy systems, 1-6.
Damak, A., Driss, Z., 2013, Abid M.S., Experimental investigation of helical Savonius rotor with a twist of 180°, Renewable Energy, 52, 136-142.
Driss, Z., Abid, M.S., 2012, Numerical and experimental study of an open circuit tunnel: aerodynamic characteristics, Science Academy Transactions on Renewable Energy Systems Engineering and Technology, 2 (1), 116-123.
Driss, Z., Mlayeh, O., Driss, D., Maaloul, M, Abid, M.S., 2014, Numerical simulation and experimental validation of the turbulent flow around a small incurved Savonius wind rotor, Energy, 74, 506-517.