Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture

Mehdi Bidabadi; Yasna Pourmohammad; Moein Mohammadi; Hamed Khalili

doi:doi:10.11648/j.ijfmts.20170304.11

| Peer-Reviewed

Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture

Mehdi Bidabadi, Yasna Pourmohammad, Moein Mohammadi, Hamed Khalili

Published in International Journal of Fluid Mechanics & Thermal Sciences (Volume 3, Issue 4)

Received: 29 May 2017 Accepted: 24 August 2017 Published: 7 October 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The combustion of aluminum nano-particles under fuel-lean conditions is studied in the counterflow configuration by means of analytical approach. The flame is assumed to consist of three zones: preheat, flame, and post flame regimes. By extraction and non-dimensionalizing of energy equations and then solving them in preheat zone and using perturbation method in the flame regime, analytical formulas for particles and gas temperature profile are presented. Then dimensionless ignition and ultimate flame temperatures, place of ignition point and flame thickness as a function of equivalence ratio in different strain rates are obtained. In addition, dimensionless ignition temperature, place of ignition point and flame thickness in terms of strain rate for different equivalence ratios are demonstrated. Reasonable agreement between the analytical solution of aluminum nano-particles counterflow combustion and experimental data is obtained in terms of flame temperature.

Published in	International Journal of Fluid Mechanics & Thermal Sciences (Volume 3, Issue 4)
DOI	10.11648/j.ijfmts.20170304.11
Page(s)	32-40
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Nano-Aluminum, Counterflow Combustion, Strain Rate, Flame Temperature

References

[1]	Beckstead, M. (2004). A summary of aluminum combustion: DTIC Document.
[2]	Beckstead, M. (2005). Correlating aluminum burning times. Combustion, Explosion and Shock Waves, 41(5), 533-546.
[3]	Bidabadi, M., Mohammadi, M., Poorfar, A. K., Mollazadeh, S., & Zadsirjan, S. (2015). Modeling combustion of aluminum dust cloud in media with spatially discrete sources. Heat and Mass Transfer, 51(6), 837-845.
[4]	Bidabadi, M., Mohammadi, M., Bidokhti, S. M., Poorfar, A. K., Zadsirjan, S., & Shariati, M. (2016). Modeling Flame Propagation of Coal Char Particles in Heterogeneous Media. Periodica Polytechnica. Chemical Engineering, 60(2), 85.
[5]	Bidabadi, M., Ramezanpour, M., Mohammadi, M., & Fereidooni, J. (2016) The Effect of Thermophoresis on Flame Propagation in Nano-Aluminum and Water Mixtures. Periodica Polytechnica Chemical Engineering, Vol. 60, No. 3, pp. 157-164, 2016.
[6]	Bocanegra, P. E., Chauveau, C., & Gökalp, I. (2007). Experimental studies on the burning of coated and uncoated micro and nano-sized aluminium particles. Aerospace science and technology, 11(1), 33-38.
[7]	Brooks, K. P., & Beckstead, M. W. (1995). Dynamics of aluminum combustion. Journal of Propulsion and Power, 11(4), 769-780.
[8]	Chen, Z., & Fan, B. (2005). Flame propagation through aluminum particle cloud in a combustion tube. Journal of loss prevention in the process industries, 18(1), 13-19.
[9]	Daou, J. (2011). Strained premixed flames: Effect of heat-loss, preferential diffusion and reversibility of the reaction. Combustion Theory and Modelling, 15(4), 437-454.
[10]	Dreizin, E. L. (1996). Experimental study of stages in aluminium particle combustion in air. Combustion and Flame, 105(4), 541-556.
[11]	Dreizin, E. L., & Trunov, M. A. (1995). Surface phenomena in aluminum combustion. Combustion and Flame, 101(3), 378-382.
[12]	Goroshin, S., Kolbe, M., & Lee, J. H. (2000). Flame speed in a binary suspension of solid fuel particles. Proceedings of the Combustion Institute, 28(2), 2811-2817.
[13]	Huang, Y., Risha, G. A., Yang, V., & Yetter, R. A. (2005). Analysis of nano-aluminum particle dust cloud combustion in different oxidizer environments. Paper presented at the 43rd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV.
[14]	Huang, Y., Risha, G. A., Yang, V., & Yetter, R. A. (2007). Combustion of bimodal nano/micron-sized aluminum particle dust in air. Proceedings of the Combustion Institute, 31(2), 2001-2009.
[15]	Huang, Y., Risha, G. A., Yang, V., & Yetter, R. A. (2009). Effect of particle size on combustion of aluminum particle dust in air. Combustion and Flame, 156(1), 5-13.
[16]	Il'in, A., Gromov, A., Vereshchagin, V., Popenko, E., Surgin, V., & Lehn, H. (2001). Combustion of ultrafine aluminum in air. Combustion, Explosion and Shock Waves, 37(6), 664-668.
[17]	Ivanov, G. V., & Tepper, F. (1997). 'Activated'Aluminum as a Stored Energy Source for Propellants. International Journal of Energetic Materials and Chemical Propulsion, 4(1-6).
[18]	Kwon, Y.-S., Gromov, A. A., Ilyin, A. P., Popenko, E. M., & Rim, G.-H. (2003). The mechanism of combustion of superfine aluminum powders. Combustion and Flame, 133(4), 385-391.
[19]	Liu, F., Daun, K., Snelling, D. R., & Smallwood, G. J. (2006). Heat conduction from a spherical nano-particle: status of modeling heat conduction in laser-induced incandescence. Applied physics B, 83(3), 355-382.
[20]	Mohammadi, M., Bidabadi, M., Khalili, H., & Poorfar, A. K. (2016). Modeling Counterflow Combustion of Dust Particle Cloud in Heterogeneous Media. Journal of Energy Engineering, 04016040.
[21]	Nayfeh, A. H. (2011). Introduction to perturbation techniques: John Wiley & Sons.
[22]	Rand, R. H., & Armbruster, D. (1988). Perturbation methods, bifurcation theory and computer algebra: Springer-Verlag New York, Inc.
[23]	Risha, G. A., Huang, Y., Yetter, R. A., & Yang, V. (2005). Experimental investigation of aluminum particle dust cloud combustion. Paper presented at the 43 rd Aerospace Sciences Meeting and Exhibit, AIAA.
[24]	Shoshin, Y. L., & Dreizin, E. L. (2006). Particle combustion rates for mechanically alloyed Al–Ti and aluminum powders burning in air. Combustion and Flame, 145(4), 714-722.
[25]	Sun, J., Dobashi, R., & Hirano, T. (2006). Structure of flames propagating through aluminum particles cloud and combustion process of particles. Journal of loss prevention in the process industries, 19(6), 769-773.
[26]	Thatcher, R., & Al Sarairah, E. (2007). Steady and unsteady flame propagation in a premixed counterflow. Combustion Theory and Modelling, 11(4), 569-583.
[27]	Wang, H., Chen, W., & Law, C. (2007). Extinction of counterflow diffusion flames with radiative heat loss and nonunity Lewis numbers. Combustion and Flame, 148(3), 100-116.
[28]	Yetter, R. A., & Dryer, F. L. (2001). Metal Particle Combustion and Classification, Micro-gravity Combustion: Fire in Free Fall: Academic Press.

Cite This Article

Plain Text BibTeX RIS

APA Style

Mehdi Bidabadi, Yasna Pourmohammad, Moein Mohammadi, Hamed Khalili. (2017). Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture. International Journal of Fluid Mechanics & Thermal Sciences, 3(4), 32-40. https://doi.org/10.11648/j.ijfmts.20170304.11

Copy | Download

ACS Style

Mehdi Bidabadi; Yasna Pourmohammad; Moein Mohammadi; Hamed Khalili. Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture. Int. J. Fluid Mech. Therm. Sci. 2017, 3(4), 32-40. doi: 10.11648/j.ijfmts.20170304.11

Copy | Download

AMA Style

Mehdi Bidabadi, Yasna Pourmohammad, Moein Mohammadi, Hamed Khalili. Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture. Int J Fluid Mech Therm Sci. 2017;3(4):32-40. doi: 10.11648/j.ijfmts.20170304.11

Copy | Download

@article{10.11648/j.ijfmts.20170304.11,
  author = {Mehdi Bidabadi and Yasna Pourmohammad and Moein Mohammadi and Hamed Khalili},
  title = {Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture},
  journal = {International Journal of Fluid Mechanics & Thermal Sciences},
  volume = {3},
  number = {4},
  pages = {32-40},
  doi = {10.11648/j.ijfmts.20170304.11},
  url = {https://doi.org/10.11648/j.ijfmts.20170304.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfmts.20170304.11},
  abstract = {The combustion of aluminum nano-particles under fuel-lean conditions is studied in the counterflow configuration by means of analytical approach. The flame is assumed to consist of three zones: preheat, flame, and post flame regimes. By extraction and non-dimensionalizing of energy equations and then solving them in preheat zone and using perturbation method in the flame regime, analytical formulas for particles and gas temperature profile are presented. Then dimensionless ignition and ultimate flame temperatures, place of ignition point and flame thickness as a function of equivalence ratio in different strain rates are obtained. In addition, dimensionless ignition temperature, place of ignition point and flame thickness in terms of strain rate for different equivalence ratios are demonstrated. Reasonable agreement between the analytical solution of aluminum nano-particles counterflow combustion and experimental data is obtained in terms of flame temperature.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture
AU  - Mehdi Bidabadi
AU  - Yasna Pourmohammad
AU  - Moein Mohammadi
AU  - Hamed Khalili
Y1  - 2017/10/07
PY  - 2017
N1  - https://doi.org/10.11648/j.ijfmts.20170304.11
DO  - 10.11648/j.ijfmts.20170304.11
T2  - International Journal of Fluid Mechanics & Thermal Sciences
JF  - International Journal of Fluid Mechanics & Thermal Sciences
JO  - International Journal of Fluid Mechanics & Thermal Sciences
SP  - 32
EP  - 40
PB  - Science Publishing Group
SN  - 2469-8113
UR  - https://doi.org/10.11648/j.ijfmts.20170304.11
AB  - The combustion of aluminum nano-particles under fuel-lean conditions is studied in the counterflow configuration by means of analytical approach. The flame is assumed to consist of three zones: preheat, flame, and post flame regimes. By extraction and non-dimensionalizing of energy equations and then solving them in preheat zone and using perturbation method in the flame regime, analytical formulas for particles and gas temperature profile are presented. Then dimensionless ignition and ultimate flame temperatures, place of ignition point and flame thickness as a function of equivalence ratio in different strain rates are obtained. In addition, dimensionless ignition temperature, place of ignition point and flame thickness in terms of strain rate for different equivalence ratios are demonstrated. Reasonable agreement between the analytical solution of aluminum nano-particles counterflow combustion and experimental data is obtained in terms of flame temperature.
VL  - 3
IS  - 4
ER  -

Copy | Download

Author Information

Mehdi Bidabadi

Mechanical Engineering Faculty, Iran University of Science and Technology, Narmak, Tehran, Iran
Yasna Pourmohammad

School of Mechanical Engineering, University of Kashan, Kashan, Iran
Moein Mohammadi

Institute of Geophysics, Faculty of Physics, University of Warsaw, Warsaw, Poland
Hamed Khalili

School of Mechanical Engineering, Iran University of Science and Technology, Narmak, Tehran, Iran

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Mehdi Bidabadi, Yasna Pourmohammad, Moein Mohammadi, Hamed Khalili. (2017). Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture. International Journal of Fluid Mechanics & Thermal Sciences, 3(4), 32-40. https://doi.org/10.11648/j.ijfmts.20170304.11

Copy | Download

ACS Style

Mehdi Bidabadi; Yasna Pourmohammad; Moein Mohammadi; Hamed Khalili. Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture. Int. J. Fluid Mech. Therm. Sci. 2017, 3(4), 32-40. doi: 10.11648/j.ijfmts.20170304.11

Copy | Download

AMA Style

Mehdi Bidabadi, Yasna Pourmohammad, Moein Mohammadi, Hamed Khalili. Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture. Int J Fluid Mech Therm Sci. 2017;3(4):32-40. doi: 10.11648/j.ijfmts.20170304.11

Copy | Download

@article{10.11648/j.ijfmts.20170304.11,
  author = {Mehdi Bidabadi and Yasna Pourmohammad and Moein Mohammadi and Hamed Khalili},
  title = {Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture},
  journal = {International Journal of Fluid Mechanics & Thermal Sciences},
  volume = {3},
  number = {4},
  pages = {32-40},
  doi = {10.11648/j.ijfmts.20170304.11},
  url = {https://doi.org/10.11648/j.ijfmts.20170304.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfmts.20170304.11},
  abstract = {The combustion of aluminum nano-particles under fuel-lean conditions is studied in the counterflow configuration by means of analytical approach. The flame is assumed to consist of three zones: preheat, flame, and post flame regimes. By extraction and non-dimensionalizing of energy equations and then solving them in preheat zone and using perturbation method in the flame regime, analytical formulas for particles and gas temperature profile are presented. Then dimensionless ignition and ultimate flame temperatures, place of ignition point and flame thickness as a function of equivalence ratio in different strain rates are obtained. In addition, dimensionless ignition temperature, place of ignition point and flame thickness in terms of strain rate for different equivalence ratios are demonstrated. Reasonable agreement between the analytical solution of aluminum nano-particles counterflow combustion and experimental data is obtained in terms of flame temperature.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Modeling of Aluminum Nano-Particles Through Counterflow Combustion in Fuel-Lean Mixture
AU  - Mehdi Bidabadi
AU  - Yasna Pourmohammad
AU  - Moein Mohammadi
AU  - Hamed Khalili
Y1  - 2017/10/07
PY  - 2017
N1  - https://doi.org/10.11648/j.ijfmts.20170304.11
DO  - 10.11648/j.ijfmts.20170304.11
T2  - International Journal of Fluid Mechanics & Thermal Sciences
JF  - International Journal of Fluid Mechanics & Thermal Sciences
JO  - International Journal of Fluid Mechanics & Thermal Sciences
SP  - 32
EP  - 40
PB  - Science Publishing Group
SN  - 2469-8113
UR  - https://doi.org/10.11648/j.ijfmts.20170304.11
AB  - The combustion of aluminum nano-particles under fuel-lean conditions is studied in the counterflow configuration by means of analytical approach. The flame is assumed to consist of three zones: preheat, flame, and post flame regimes. By extraction and non-dimensionalizing of energy equations and then solving them in preheat zone and using perturbation method in the flame regime, analytical formulas for particles and gas temperature profile are presented. Then dimensionless ignition and ultimate flame temperatures, place of ignition point and flame thickness as a function of equivalence ratio in different strain rates are obtained. In addition, dimensionless ignition temperature, place of ignition point and flame thickness in terms of strain rate for different equivalence ratios are demonstrated. Reasonable agreement between the analytical solution of aluminum nano-particles counterflow combustion and experimental data is obtained in terms of flame temperature.
VL  - 3
IS  - 4
ER  -

Copy | Download