Superconductivityis generally regarded as one of the most striking and widely used physical phenomenon. Physicists in response have shown sheer interest in scrutinizing superconductivity and constructing theoretical models to explain it. The majorityof models derived in this regard neglected some aspects of superconductivity. The link between critical temperature and pressure remains a highly neglected and potentially representing a research gap in this area. Thus, this motivates the researchers to construct a new model on the relation between pressure and superconductors critical temperature using a string model. The study mainly aims to construct theoretical model based on string model in attempt to understand the effect of pressure on critical temperature and superconducting resistance. The results of study reveal that using plasma equation for mechanical and thermal pressure the frequency is obtained. It also finds that treating electrons as string the energy is found in terms temperature and pressure. Further, when the superconducting resistance vanishes the corresponding critical temperature was found. Furthermore, the increasing mechanical pressure increases the critical temperature.
| Published in | International Journal of Fluid Mechanics & Thermal Sciences (Volume 3, Issue 6) |
| DOI | 10.11648/j.ijfmts.20170306.12 |
| Page(s) | 70-74 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Plasma Equation, Superconductivity, Resistivity, Critical Temperature, Pressure
| [1] | Berk, N. and Schrieffer, J. (1966) in Superconductivity. Phys. Rev. Lett, 17, 433. |
| [2] | Poole, P. and JR. (2000) Handbook of superconductivity, A Harcourt Science and Technology Company, USA. |
| [3] | Christian Barth, (2013) High Temperature Superconductor Cable Concepts for Fusion Magnets, KIT scientific publishing, ISSN: 1869-1765. |
| [4] | Charles Kittel, (2005) Introduction to solid state physics, eight editions, library of congress cataloging, USA. |
| [5] | Sharma, R. (2015) Superconductivity Basics and Applications to Magnets, National Physical Laboratory, India. |
| [6] | Hook, R. and Hall, E. (2010) Solid state physics, Second addition, library of congress cataloging, USA. |
| [7] | Michel cyrot and Davor Pavuna. (1992) Introduction to superconductivity and high-Tc materials, world scientific, Singapore. |
| [8] | Giuseppe Grosso and Giuseppe pastori parravcini. (2003) Solid state physics, second printing, British Library Cataloguing, UK. |
| [9] | Gupta, C. (2009) Solid state physics second revised enlarged edition, Vikas Publishing House (P) Ltd. UBS Publisher's Distributors, New Delhi. |
| [10] | Cardwell, A. and Ginley, S. (2003) Handbook of superconducting materials volume 1: superconductivity, materials and processes, Institute of Physics Publishing, UK. |
| [11] | Neeraj Mehta. (2009) Textbook of engineering physics part II, PHI learning private Limited, New Delhi. |
| [12] | Uchida. (2015) High temperature superconductivity, the road to higher critical temperature, DOI 10.1007/978-4-431-55300-7. |
| [13] | Wesche. (2015) Physical properties of high-temperature superconductors, John Wiley & Sons, United Kingdom. |
| [14] | Alexandrov, S. (2003) Theory of Superconductivity from Weak to Strong Coupling, IOP Publishing Ltd, Bristol and Philadelphia. |
| [15] | Sin, A., Odier, P., Regueiro, M., Ordando, M., and Cunha, A. (1999) pressure effects in Hg0.82Re0.18Ba(2-y)SryCa2Cu3O8+σ, in Xavier Obradors, F. Sandiumenge, J. Fontcuberta (eds.), Applied Superconductivity 1999, volume 1. Large scale applications, proceedings of EUCAS, the fourth European conference on applied superconductivity, held in Sitges, Spain. |
| [16] | Narlikar, A. (2005) Frontiers in superconducting materials, Springer, Germany. |
| [17] | Mourachkine. (2004) Room-temperature superconductivity, cambridge international science publishing, UK. |
| [18] | Angilella and Pucci. (2000) Pressure effect in high-Tc super conductors whith n inequivalent layers. |
| [19] | Jover, D., Wilhelm, H., and Wijngaarden, R. (1997) Pressure dependence of the superconducting critical temperature of the Tl0.5Pb0.5Sr2Ca1-xYxCu2O7 system, Physical review b, volume 55. |
| [20] | Alekseevsk, N., Dobrovol'sk, N., Nizhankovsk, V., and Tsebro, V. (1975) Effect of pressure on the properties of molybdenum sulfidesin the superconducting and normal states, Institute of Physical Problems, USSR Academy of Sciences, Zh. Eksp. Teor. Fiz. 69, 662-665. |
| [21] | Altambori, A., Zakaria, A., Dirar, M., ELhussien, A., AbdALgani, R., and Abdalla, A. (2016) Quantum relation between superconductivity resistance and energy gap, global journal of engineering science and researches. |
| [22] | Zakaria, A., Altambori, A., Dirar, M., ELhussien, A., AbdALgani, R., and Abdalla, A. (2016) Quantum effect of magnetic field in destroying superconductivity, international journal of engineering sciences & management. |
| [23] | Nikolay Plakida. (2013) High-temperature cuprate superconductors, experiment, theory, and applications, DOI 10.1007/978-3642-12633-8. |
| [24] | Jover, D., Wilhelm, H., and Wijngaarden, R. (1996) Pressure dependence of the superconducting critical temperature of the T10.5Pb0.5Sr2Ca12xYxCu2.7 system, physical review, volume 55. |
| [25] | Parinov, I. (2007) Microstructure and Properties of High-Temperature Superconductors, Springer Berlin Heidelberg New York. |
APA Style
Ibrahim Adam Ibrahim Hammad, Mubarak Dirar, Nadia Omar Alatta, Rasha Abd Alhai Taha, Kh. M. Haroun, et al. (2017). Pressure Effect on Superconducting Critical Temperature According to String Model. International Journal of Fluid Mechanics & Thermal Sciences, 3(6), 70-74. https://doi.org/10.11648/j.ijfmts.20170306.12
ACS Style
Ibrahim Adam Ibrahim Hammad; Mubarak Dirar; Nadia Omar Alatta; Rasha Abd Alhai Taha; Kh. M. Haroun, et al. Pressure Effect on Superconducting Critical Temperature According to String Model. Int. J. Fluid Mech. Therm. Sci. 2017, 3(6), 70-74. doi: 10.11648/j.ijfmts.20170306.12
AMA Style
Ibrahim Adam Ibrahim Hammad, Mubarak Dirar, Nadia Omar Alatta, Rasha Abd Alhai Taha, Kh. M. Haroun, et al. Pressure Effect on Superconducting Critical Temperature According to String Model. Int J Fluid Mech Therm Sci. 2017;3(6):70-74. doi: 10.11648/j.ijfmts.20170306.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijfmts.20170306.12,
author = {Ibrahim Adam Ibrahim Hammad and Mubarak Dirar and Nadia Omar Alatta and Rasha Abd Alhai Taha and Kh. M. Haroun and Rawia A. Elgani},
title = {Pressure Effect on Superconducting Critical Temperature According to String Model},
journal = {International Journal of Fluid Mechanics & Thermal Sciences},
volume = {3},
number = {6},
pages = {70-74},
doi = {10.11648/j.ijfmts.20170306.12},
url = {https://doi.org/10.11648/j.ijfmts.20170306.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfmts.20170306.12},
abstract = {Superconductivityis generally regarded as one of the most striking and widely used physical phenomenon. Physicists in response have shown sheer interest in scrutinizing superconductivity and constructing theoretical models to explain it. The majorityof models derived in this regard neglected some aspects of superconductivity. The link between critical temperature and pressure remains a highly neglected and potentially representing a research gap in this area. Thus, this motivates the researchers to construct a new model on the relation between pressure and superconductors critical temperature using a string model. The study mainly aims to construct theoretical model based on string model in attempt to understand the effect of pressure on critical temperature and superconducting resistance. The results of study reveal that using plasma equation for mechanical and thermal pressure the frequency is obtained. It also finds that treating electrons as string the energy is found in terms temperature and pressure. Further, when the superconducting resistance vanishes the corresponding critical temperature was found. Furthermore, the increasing mechanical pressure increases the critical temperature.},
year = {2017}
}
TY - JOUR T1 - Pressure Effect on Superconducting Critical Temperature According to String Model AU - Ibrahim Adam Ibrahim Hammad AU - Mubarak Dirar AU - Nadia Omar Alatta AU - Rasha Abd Alhai Taha AU - Kh. M. Haroun AU - Rawia A. Elgani Y1 - 2017/11/28 PY - 2017 N1 - https://doi.org/10.11648/j.ijfmts.20170306.12 DO - 10.11648/j.ijfmts.20170306.12 T2 - International Journal of Fluid Mechanics & Thermal Sciences JF - International Journal of Fluid Mechanics & Thermal Sciences JO - International Journal of Fluid Mechanics & Thermal Sciences SP - 70 EP - 74 PB - Science Publishing Group SN - 2469-8113 UR - https://doi.org/10.11648/j.ijfmts.20170306.12 AB - Superconductivityis generally regarded as one of the most striking and widely used physical phenomenon. Physicists in response have shown sheer interest in scrutinizing superconductivity and constructing theoretical models to explain it. The majorityof models derived in this regard neglected some aspects of superconductivity. The link between critical temperature and pressure remains a highly neglected and potentially representing a research gap in this area. Thus, this motivates the researchers to construct a new model on the relation between pressure and superconductors critical temperature using a string model. The study mainly aims to construct theoretical model based on string model in attempt to understand the effect of pressure on critical temperature and superconducting resistance. The results of study reveal that using plasma equation for mechanical and thermal pressure the frequency is obtained. It also finds that treating electrons as string the energy is found in terms temperature and pressure. Further, when the superconducting resistance vanishes the corresponding critical temperature was found. Furthermore, the increasing mechanical pressure increases the critical temperature. VL - 3 IS - 6 ER -
Information
Email: