American Journal of Polymer Science and Technology

| Peer-Reviewed |

Synthesis of Nano-Cellulose from Okra Fibre and FTIR as Well as Morphological Studies on It

Received: 19 November 2018    Accepted: 06 December 2018    Published: 07 January 2019
Views:       Downloads:

Share This Article

Abstract

Nano-cellulose was extracted from Okra fiber by various chemical treatment such as alkali treatment, bleaching and then by acid hydrolysis. The final products were characterized by means of Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). FTIR results showed that the hemicelluloses and lignin were removed from the extracted nano-cellulose. On the other hand, SEM analysis showed that the surface morphology of raw fiber, bleached fiber, alkali treated fiber and nano-cellulosic fiber. The surface of raw fiber was rough, not plain and smooth but the surface of Crystalline Nano Cellolose (CNC) became plain, smooth and not rough for the removing of lignin and fatty and waxy materials from it and simultaneously there is a honey comb structure appeared which will be very helpful for producing nano composites with polymeric materials. Size of the okra fiber was cellulose reduced into nano-sized particles.

DOI 10.11648/j.ajpst.20180402.11
Published in American Journal of Polymer Science and Technology (Volume 4, Issue 2, June 2018)
Page(s) 42-52
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Nano-Cellulose, Cellulose, Acid Hydrolysis, Natural Fibers, Surface Morphology

References
[1] De Rosa et al, (2010) Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites. Composites Science and Technology, Volume 70.
[2] Mayoclinic.org/diseases-conditions/kidney-stones/diagnosis-treatment/drc-20355759.
[3] Jorfi, M.;Foster, E. J.; “Recent advances in Nano-cellulose for biomedical applications”, Journal of applied polymer science, vol. 132,2015.
[4] Moon, R. J.; Martini, A.; Nairn, J.; Simonsen, J.; Youngblood, J.; Cellulose nanomaterials review: structure: properties and nanocomposites, Chemical Society Reviews, 2011, 40, 3941.
[5] Zhou, Y. M.;Fu, S. Y.;Zheng, L. M.;Zhan, H. Y.; “Effect of Nano-cellulose isolation techniques on the formation of reinforced PVA composite films”; Express polymer letters; vol 6, p 10,2012.
[6] Illum L, Davis S. Chitosan as a delivery system for the transmucosal administration of drugs. In: Dumitriu S, editor. Polysaccharides. Structural diversity and functional versatility. 2d ed. New York: Marcel Dekker Publ.; p. 643–60,2005.
[7] www.123rf.com/photo_68567206_stock-vector-cellulose-is-mainly-used-to-produce-paperboard-and-paper-smaller-quantities-are-converted-into-a-wid.html.
[8] Demirbas, A. Bioethanol from Cellulosic Materials: A Renewable Motor Fuel from Biomass. Energy Source. 27 327-337 (2005).
[9] Kumar S. Conversion of Food Waste to useful Chemicals/Products Bachelor of Technology (Chemical Engineering) Thesis, National Institute of Technology, Rourkela, India; 2010.
[10] science.jrank.org/pages/1335/Cellulose-Cellulose-digestion.html.
[11] Sabu Thomas, ‎P. M. Visakh, ‎Aji. P Mathew - 2012 - ‎Technology & Engineering.
[12] Vijay Kumar Thakur, ‎Manju Kumari Thakur - 2015 - ‎Technology & Engineering.
[13] Amelia Pilar Rauter, ‎Thisbe Lindhorst, ‎Yves Queneau - 2017 - ‎Science.
[14] d2cax41o7ahm5l. cloudfront.net/cs/speaker-pdfs/megan-h-hargreaves-queensland-university-of-technology-australia-1547649752.pdf.
[15] Lebo, Stuart E. Jr.; Gargulak, Jerry D. and McNally, Timothy J. (2001). "Lignin". Kirk‑Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc doi:10.1002/0471238961.12090714120914.a01.pub2. http://www.mrw.interscience.wiley.com/emrw/9780471238966/kirk/article/lignlin.a01/current/pdf. Retrieved 2007-10-14.
[16] Martone, Pt; Estevez, Jm; Lu, F; Ruel, K; Denny, Mw; Somerville, C; Ralph, J (Jan 2009). "Discovery of Lignin in Seaweed Reveals Convergent Evolution of Cell-Wall Architecture.". Current biology: CB 19 (2): 169–75. doi: 10.1016/j.cub.2008.12.031. ISSN 0960-9822. PMID 19167225.
[17] E. Sjöström (1993). Wood Chemistry: Fundamentals and Applications. Academic Press. ISBN 0-12-647480-X.
[18] W. Boerjan; J. Ralph; M. Baucher (June 2003). "Lignin biosynthesis". Annu. Rev. Plant Biol. 54(1): 519–549. doi:10.1146/annurev.arplant.54.031902.134938. PMID 14503002.
[19] Biology, Arms and Camp, 1995.
[20] Anatomy of Seed Plants, Esau, 1977.
[21] Wardrop; The (1969). "Eryngium sp.;". Aust. J. Botany. 17 (2): 229–240. doi:10.1071/bt9690229.
[22] P. Aline, V. Christophe, D. Alain, Biomacromolecules, 4, p.12, 2003.
[23] http://www.definetextile.com/2013/05/scouring.html.
[24] Herbert, R. M. (1954) Textile Fibres, Their Physical, Microscopy and Mechanical Properties, Chapman and Hall, London.
[25] https://kpfu.ru/staff_files/.../2010_FTIR.study.of. H_bonds.cooperativity.pdf.
[26] Y. R. Sharma, Elementary Organic Spectroscopy, Principles and Chemical Ap-plications, S. Chand &Company Ltd., New Delhi, 1994, pp. 92e93.
[27] www.bookdepository.com/Elementary-Organic-Spectroscopy-Y-R-Sharma/9788121928847.
[28] Y. R. Sharma, Elementary Organic Spectroscopy, Principles and Chemical Ap-plications, S. Chand &Company Ltd., New Delhi, 1994, pp. 92e92.
[29] serc.carleton.edu/research_education/geochemsheets/techniques/SEM.html.
[30] Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of composite material A Ali, K Shaker, Y Nawab, M Ashraf… - Journal of …, 2015 - journals.sagepub.com.
[31] https://research.georgiasouthern.edu/herty/technologies/nanocellulose.
Author Information
  • Department of Basic Science, Primeasia University, Dhaka, Bangladesh; Department of Applied Chemistry and Chemical Engineering, Islamic University, Kushtia, Bangladesh

  • Department of Applied Chemistry and Chemical Engineering, Islamic University, Kushtia, Bangladesh

  • Department of Applied Chemistry and Chemical Engineering, Islamic University, Kushtia, Bangladesh

  • Department of Chemistry, National University, Gazipur, Bangladesh

Cite This Article
  • APA Style

    Md. Mahmudur Rahman, Mohd Maniruzzaman, Md. Rashidul Islam, Md. Saifur Rahman. (2019). Synthesis of Nano-Cellulose from Okra Fibre and FTIR as Well as Morphological Studies on It. American Journal of Polymer Science and Technology, 4(2), 42-52. https://doi.org/10.11648/j.ajpst.20180402.11

    Copy | Download

    ACS Style

    Md. Mahmudur Rahman; Mohd Maniruzzaman; Md. Rashidul Islam; Md. Saifur Rahman. Synthesis of Nano-Cellulose from Okra Fibre and FTIR as Well as Morphological Studies on It. Am. J. Polym. Sci. Technol. 2019, 4(2), 42-52. doi: 10.11648/j.ajpst.20180402.11

    Copy | Download

    AMA Style

    Md. Mahmudur Rahman, Mohd Maniruzzaman, Md. Rashidul Islam, Md. Saifur Rahman. Synthesis of Nano-Cellulose from Okra Fibre and FTIR as Well as Morphological Studies on It. Am J Polym Sci Technol. 2019;4(2):42-52. doi: 10.11648/j.ajpst.20180402.11

    Copy | Download

  • @article{10.11648/j.ajpst.20180402.11,
      author = {Md. Mahmudur Rahman and Mohd Maniruzzaman and Md. Rashidul Islam and Md. Saifur Rahman},
      title = {Synthesis of Nano-Cellulose from Okra Fibre and FTIR as Well as Morphological Studies on It},
      journal = {American Journal of Polymer Science and Technology},
      volume = {4},
      number = {2},
      pages = {42-52},
      doi = {10.11648/j.ajpst.20180402.11},
      url = {https://doi.org/10.11648/j.ajpst.20180402.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajpst.20180402.11},
      abstract = {Nano-cellulose was extracted from Okra fiber by various chemical treatment such as alkali treatment, bleaching and then by acid hydrolysis. The final products were characterized by means of Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). FTIR results showed that the hemicelluloses and lignin were removed from the extracted nano-cellulose. On the other hand, SEM analysis showed that the surface morphology of raw fiber, bleached fiber, alkali treated fiber and nano-cellulosic fiber. The surface of raw fiber was rough, not plain and smooth but the surface of Crystalline Nano Cellolose (CNC) became plain, smooth and not rough for the removing of lignin and fatty and waxy materials from it and simultaneously there is a honey comb structure appeared which will be very helpful for producing nano composites with polymeric materials. Size of the okra fiber was cellulose reduced into nano-sized particles.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Synthesis of Nano-Cellulose from Okra Fibre and FTIR as Well as Morphological Studies on It
    AU  - Md. Mahmudur Rahman
    AU  - Mohd Maniruzzaman
    AU  - Md. Rashidul Islam
    AU  - Md. Saifur Rahman
    Y1  - 2019/01/07
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ajpst.20180402.11
    DO  - 10.11648/j.ajpst.20180402.11
    T2  - American Journal of Polymer Science and Technology
    JF  - American Journal of Polymer Science and Technology
    JO  - American Journal of Polymer Science and Technology
    SP  - 42
    EP  - 52
    PB  - Science Publishing Group
    SN  - 2575-5986
    UR  - https://doi.org/10.11648/j.ajpst.20180402.11
    AB  - Nano-cellulose was extracted from Okra fiber by various chemical treatment such as alkali treatment, bleaching and then by acid hydrolysis. The final products were characterized by means of Infrared Spectroscopy (FTIR) and Scanning Electron Microscope (SEM). FTIR results showed that the hemicelluloses and lignin were removed from the extracted nano-cellulose. On the other hand, SEM analysis showed that the surface morphology of raw fiber, bleached fiber, alkali treated fiber and nano-cellulosic fiber. The surface of raw fiber was rough, not plain and smooth but the surface of Crystalline Nano Cellolose (CNC) became plain, smooth and not rough for the removing of lignin and fatty and waxy materials from it and simultaneously there is a honey comb structure appeared which will be very helpful for producing nano composites with polymeric materials. Size of the okra fiber was cellulose reduced into nano-sized particles.
    VL  - 4
    IS  - 2
    ER  - 

    Copy | Download

  • Sections