American Journal of Polymer Science and Technology

| Peer-Reviewed |

Constructing of Highly Ordered 3D Network of Carbon Nanotube inside Polymer Matrix and the Improvements in Properties of the Composites

Received: 21 January 2019    Accepted: 28 February 2019    Published: 21 March 2019
Views:       Downloads:

Share This Article

Abstract

In the past few decades, carbon nanotube-filled polymer composites have attracted the attention of many researchers with their excellent performance. However, the currently known methods of preparing composite materials do not maximize the performance of the carbon nanotubes themselves. In this work, by using our proposed “particle-constructing” method, multi-wall carbon nanotubes (MWCNTs) connected with each other to form highly ordered 3D network structure in polystyrene (PS) matrix. The strategy contains two steps as follows. First, MWCNTs-coated PS composite particles were prepared by the thermodynamic driving heterocoargulation method, without any requirement to surface modification or surface treatment whether for the MWCNTs or the PS microspheres. Then, the resultant MWCNTs-coated PS composite particles are used as building blocks to fabricate the highly ordered 3D MWCNT-based PS composite materials by a general compression mould at room temperature and a subsequent heat treatment at an appropriate temperature. We discuss in detail the effects of PS particle size, oxidation of MWCNTs and their length on the electrical conductivity of materials. The fabricated MWCNT-based PS composite materials exhibited excellent properties such as a much higher electrical and mechanical properties. Moreover, the method and process are pretty simple, convenient and environment-friendly for obtaining the unique composite structure and excellent properties.

DOI 10.11648/j.ajpst.20190501.12
Published in American Journal of Polymer Science and Technology (Volume 5, Issue 1, March 2019)
Page(s) 9-15
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Carbon Nanotube, Conductive Material, Polymer Nanocomposites, 3D Network Structure

References
[1] Z. Spitalsky, D. Tasis, K. Papagelis, C. Galiotis, Carbon nanotube-polymer composites: Chemistry, processing, mechanical and electrical properties, Progress in Polymer Science, 35 (2010) 357-401.
[2] D. M. Guldi, G. M. A. Rahman, F. Zerbetto, M. Prato, Carbon nanotubes in electron donor-acceptor nanocomposites, Accounts of Chemical Research, 38 (2005) 871-878.
[3] D. Tasis, N. Tagmatarchis, A. Bianco, M. Prato, Chemistry of carbon nanotubes, Chemical Reviews, 106 (2006) 1105-1136.
[4] P. R. Bandaru, Electrical properties and applications of carbon nanotube structures, Journal of Nanoscience and Nanotechnology, 7 (2007) 1239-1267.
[5] J. P. Salvetat, J. M. Bonard, N. H. Thomson, A. J. Kulik, L. Forro, W. Benoit, L. Zuppiroli, Mechanical properties of carbon nanotubes, Applied Physics a-Materials Science & Processing, 69 (1999) 255-260.
[6] E. W. Wong, P. E. Sheehan, C. M. Lieber, Nanobeam mechanics: Elasticity, strength, and toughness of nanorods and nanotubes, Science, 277 (1997) 1971-1975.
[7] M. M. J. Treacy, T. W. Ebbesen, J. M. Gibson, Exceptionally high Young's modulus observed for individual carbon nanotubes, Nature, 381 (1996) 678-680.
[8] S. J. Tans, M. H. Devoret, H. J. Dai, A. Thess, R. E. Smalley, L. J. Geerligs, C. Dekker, Individual single-wall carbon nanotubes as quantum wires, Nature, 386 (1997) 474-477.
[9] M. R. Maschmann, G. J. Ehlert, B. T. Dickinson, D. M. Phillips, C. W. Ray, G. W. Reich, J. W. Baur, Bioinspired Carbon Nanotube Fuzzy Fiber Hair Sensor for Air-Flow Detection, Advanced Materials, 26 (2014) 3230-+.
[10] C. Mu, Y. Song, W. Huang, A. Ran, R. Sun, W. Xie, H. Zhang, Flexible Normal-Tangential Force Sensor with Opposite Resistance Responding for Highly Sensitive Artificial Skin, Advanced Functional Materials, 28 (2018).
[11] L.-C. Jia, Y.-K. Li, D.-X. Yan, Flexible and efficient electromagnetic interference shielding materials from ground tire rubber, Carbon, 121 (2017) 267-273.
[12] P. M. Ajayan, O. Stephan, C. Colliex, D. Trauth, ALIGNED CARBON NANOTUBE ARRAYS FORMED BY CUTTING A POLYMER RESIN-NANOTUBE COMPOSITE, Science, 265 (1994) 1212-1214.
[13] F. M. Du, J. E. Fischer, K. I. Winey, Coagulation method for preparing single-walled carbon nanotube/poly (methyl methacrylate) composites and their modulus, electrical conductivity, and thermal stability, Journal of Polymer Science Part B-Polymer Physics, 41 (2003) 3333-3338.
[14] M. Wang, K. Zhang, X.-X. Dai, Y. Li, J. Guo, H. Liu, G.-H. Li, Y.-J. Tan, J.-B. Zeng, Z. Guo, Enhanced electrical conductivity and piezoresistive sensing in multi-wall carbon nanotubes/polydimethylsiloxane nanocomposites via the construction of a self-segregated structure, Nanoscale, 9 (2017) 11017-11026.
[15] S. Kumar, T. D. Dang, F. E. Arnold, A. R. Bhattacharyya, B. G. Min, X. F. Zhang, R. A. Vaia, C. Park, W. W. Adams, R. H. Hauge, R. E. Smalley, S. Ramesh, P. A. Willis, Synthesis, structure, and properties of PBO/SWNT composites, Macromolecules, 35 (2002) 9039-9043.
[16] H. J. Barraza, F. Pompeo, E. A. O'Rear, D. E. Resasco, SWNT-filled thermoplastic and elastomeric composites prepared by miniemulsion polymerization, Nano Letters, 2 (2002) 797-802.
[17] R. Haggenmueller, H. H. Gommans, A. G. Rinzler, J. E. Fischer, K. I. Winey, Aligned single-wall carbon nanotubes in composites by melt processing methods, Chemical Physics Letters, 330 (2000) 219-225.
[18] M. A. Lopez-Manchado, L. Valentini, J. Biagiotti, J. M. Kenny, Thermal and mechanical properties of single-walled carbon nano tubes-polypropylene composites prepared by melt processing, Carbon, 43 (2005) 1499-1505.
[19] P. Potschke, A. R. Bhattacharyya, A. Janke, Carbon nanotube-filled polycarbonate composites produced by melt mixing and their use in blends with polyethylene, Carbon, 42 (2004) 965-969.
[20] K. Wu, C. Lei, R. Huang, W. Yang, S. Chai, C. Geng, F. Chen, Q. Feng, Design and Preparation of a Unique Segregated Double Network with Excellent Thermal Conductive Property, Acs Applied Materials & Interfaces, 9 (2017) 7637-7647.
[21] S. Biswas, I. Arief, S. S. Panja, S. Bose, Absorption-Dominated Electromagnetic Wave Suppressor Derived from Ferrite-Doped Cross-Linked Graphene Framework and Conducting Carbon, Acs Applied Materials & Interfaces, 9 (2017) 3030-3039.
[22] J. Yu, K. Lu, E. Sourty, N. Grossiord, C. E. Konine, J. Loos, Characterization of conductive multiwall carbon nanotube/polystyrene composites prepared by latex technology, Carbon, 45 (2007) 2897-2903.
[23] Y. Li, Z. Wang, C. Wang, Y. Pan, H. Gu, G. Xue, Colloid thermodynamic effect as the universal driving force for fabricating various functional composite particles, Langmuir: the ACS journal of surfaces and colloids, 28 (2012) 12704-12710.
[24] J. Hwang, J. Jang, K. Hong, K. N. Kim, J. H. Han, K. Shin, C. E. Park, Poly (3-hexylthiophene) wrapped carbon nanotube/poly (dimethylsiloxane) composites for use in finger-sensing piezoresistive pressure sensors, Carbon, 49 (2011) 106-110.
[25] T. Li, L.-F. Ma, R.-Y. Bao, G.-Q. Qi, W. Yang, B.-H. Xie, M.-B. Yang, A new approach to construct segregated structures in thermoplastic polyolefin elastomers towards improved conductive and mechanical properties, Journal of Materials Chemistry A, 3 (2015) 5482-5490.
Author Information
  • Department of Polymer Science and Engineering, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, P. R. China

  • Department of Polymer Science and Engineering, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, P. R. China

  • Department of Polymer Science and Engineering, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, P. R. China

  • Department of Polymer Science and Engineering, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, P. R. China

  • Department of Polymer Science and Engineering, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, P. R. China

Cite This Article
  • APA Style

    Liang Yang, Yan Zheng, Min Hou, Wanyi Chen, Zhaoqun Wang. (2019). Constructing of Highly Ordered 3D Network of Carbon Nanotube inside Polymer Matrix and the Improvements in Properties of the Composites. American Journal of Polymer Science and Technology, 5(1), 9-15. https://doi.org/10.11648/j.ajpst.20190501.12

    Copy | Download

    ACS Style

    Liang Yang; Yan Zheng; Min Hou; Wanyi Chen; Zhaoqun Wang. Constructing of Highly Ordered 3D Network of Carbon Nanotube inside Polymer Matrix and the Improvements in Properties of the Composites. Am. J. Polym. Sci. Technol. 2019, 5(1), 9-15. doi: 10.11648/j.ajpst.20190501.12

    Copy | Download

    AMA Style

    Liang Yang, Yan Zheng, Min Hou, Wanyi Chen, Zhaoqun Wang. Constructing of Highly Ordered 3D Network of Carbon Nanotube inside Polymer Matrix and the Improvements in Properties of the Composites. Am J Polym Sci Technol. 2019;5(1):9-15. doi: 10.11648/j.ajpst.20190501.12

    Copy | Download

  • @article{10.11648/j.ajpst.20190501.12,
      author = {Liang Yang and Yan Zheng and Min Hou and Wanyi Chen and Zhaoqun Wang},
      title = {Constructing of Highly Ordered 3D Network of Carbon Nanotube inside Polymer Matrix and the Improvements in Properties of the Composites},
      journal = {American Journal of Polymer Science and Technology},
      volume = {5},
      number = {1},
      pages = {9-15},
      doi = {10.11648/j.ajpst.20190501.12},
      url = {https://doi.org/10.11648/j.ajpst.20190501.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajpst.20190501.12},
      abstract = {In the past few decades, carbon nanotube-filled polymer composites have attracted the attention of many researchers with their excellent performance. However, the currently known methods of preparing composite materials do not maximize the performance of the carbon nanotubes themselves. In this work, by using our proposed “particle-constructing” method, multi-wall carbon nanotubes (MWCNTs) connected with each other to form highly ordered 3D network structure in polystyrene (PS) matrix. The strategy contains two steps as follows. First, MWCNTs-coated PS composite particles were prepared by the thermodynamic driving heterocoargulation method, without any requirement to surface modification or surface treatment whether for the MWCNTs or the PS microspheres. Then, the resultant MWCNTs-coated PS composite particles are used as building blocks to fabricate the highly ordered 3D MWCNT-based PS composite materials by a general compression mould at room temperature and a subsequent heat treatment at an appropriate temperature. We discuss in detail the effects of PS particle size, oxidation of MWCNTs and their length on the electrical conductivity of materials. The fabricated MWCNT-based PS composite materials exhibited excellent properties such as a much higher electrical and mechanical properties. Moreover, the method and process are pretty simple, convenient and environment-friendly for obtaining the unique composite structure and excellent properties.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Constructing of Highly Ordered 3D Network of Carbon Nanotube inside Polymer Matrix and the Improvements in Properties of the Composites
    AU  - Liang Yang
    AU  - Yan Zheng
    AU  - Min Hou
    AU  - Wanyi Chen
    AU  - Zhaoqun Wang
    Y1  - 2019/03/21
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ajpst.20190501.12
    DO  - 10.11648/j.ajpst.20190501.12
    T2  - American Journal of Polymer Science and Technology
    JF  - American Journal of Polymer Science and Technology
    JO  - American Journal of Polymer Science and Technology
    SP  - 9
    EP  - 15
    PB  - Science Publishing Group
    SN  - 2575-5986
    UR  - https://doi.org/10.11648/j.ajpst.20190501.12
    AB  - In the past few decades, carbon nanotube-filled polymer composites have attracted the attention of many researchers with their excellent performance. However, the currently known methods of preparing composite materials do not maximize the performance of the carbon nanotubes themselves. In this work, by using our proposed “particle-constructing” method, multi-wall carbon nanotubes (MWCNTs) connected with each other to form highly ordered 3D network structure in polystyrene (PS) matrix. The strategy contains two steps as follows. First, MWCNTs-coated PS composite particles were prepared by the thermodynamic driving heterocoargulation method, without any requirement to surface modification or surface treatment whether for the MWCNTs or the PS microspheres. Then, the resultant MWCNTs-coated PS composite particles are used as building blocks to fabricate the highly ordered 3D MWCNT-based PS composite materials by a general compression mould at room temperature and a subsequent heat treatment at an appropriate temperature. We discuss in detail the effects of PS particle size, oxidation of MWCNTs and their length on the electrical conductivity of materials. The fabricated MWCNT-based PS composite materials exhibited excellent properties such as a much higher electrical and mechanical properties. Moreover, the method and process are pretty simple, convenient and environment-friendly for obtaining the unique composite structure and excellent properties.
    VL  - 5
    IS  - 1
    ER  - 

    Copy | Download

  • Sections