Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors

Gozde Tektas; Cuneyt Celiktas

doi:doi:10.11648/j.rst.20150101.11

| Peer-Reviewed

Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors

Gozde Tektas, Cuneyt Celiktas

Published in Radiation Science and Technology (Volume 1, Issue 1)

Received: 4 July 2015 Accepted: 14 July 2015 Published: 17 July 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

A virtual oscilloscope was designed by using the LabVIEW software. Signals supplied by a pulse generator and background radiation signals from a NaI(Tl) scintillation detector were displayed in a real and a virtual oscilloscope, respectively. Amplitude, maximum voltage, rise time and fall time values through the oscilloscopes for both type signals were measured. They were acquired in different time/div. values to test and compare their performances. Obtained results and the signal shapes from them were meticulously compared. It was observed that they were highly comparable to each other. Results indicate that the developed virtual oscilloscope would reliably be able to be used for data acquisition as well as a real oscilloscope.

Published in	Radiation Science and Technology (Volume 1, Issue 1)
DOI	10.11648/j.rst.20150101.11
Page(s)	1-5
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

NaI(Tl) Detectors, LabVIEW Software, Virtual Oscilloscope and GPIB

References

[1]	Sumathi, S., Surekha, P., 2007. “LabVIEW based Advanced Instrumentation Systems”. Springer Berlin Heidelberg New York.
[2]	Pechousek, J., 2011. “Application of Virtual Instrumentation in Nuclear Physics Experiments” in Practical Applications and Solutions Using LabVIEW, InTech.
[3]	Pechousek, J., Prochazka, R., Prochazka, V., Frydrych, J., 2011. “Virtual instrumentation technique used in the nuclear digital signal processing system design: Energy and time measurement tests”. Nuclear Instruments and Methods in Physics Research A. 637, 200-205.
[4]	Gong, P., Zhou, W., 2012. “Design and Implementation of Multifunctional Virtual Oscilloscope Using USB Data-Acquisition Card”. Procedia Engineering. 29, 3245-3249.
[5]	NI LabVIEW Measurements Manual. http://fy.chalmers.se/~f7xlh/LV_Kurs/Measur_Man_2000.pdf
[6]	Travis, J., Kring, J., 2006. “LabVIEW for Everyone: Graphical Programming Made Easy and Fun”. Third Edition, Prentice Hall, U.S.A.
[7]	Shinde, S., Prabhu, S., 2013. “Labview Based Digital CRO For Electronic Measurement Techniques”. IJERA. 3 (1), 693-698.
[8]	GDS-2000 Series Digital Oscilloscope User Manual. https://fenix.tecnico.ulisboa.pt/downloadFile/3779578030076/GDS-2000_User_Manual_20080416[1].pdf
[9]	Leo, R.W., 1987. “Techniques for Nuclear and Particle Physics Experiments”. Springer–Verlag Berlin Heidelberg, Germany.
[10]	ShengLi, D., JunFeng, H., ShengHui, P., JianFeng, D., 2011. “Design of Virtual Oscilloscope Based LAbVIEW”. Springer-Verlag Berlin Heidelberg. 34-41.

Cite This Article

Plain Text BibTeX RIS

APA Style

Gozde Tektas, Cuneyt Celiktas. (2015). Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors. Radiation Science and Technology, 1(1), 1-5. https://doi.org/10.11648/j.rst.20150101.11

Copy | Download

ACS Style

Gozde Tektas; Cuneyt Celiktas. Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors. Radiat. Sci. Technol. 2015, 1(1), 1-5. doi: 10.11648/j.rst.20150101.11

Copy | Download

AMA Style

Gozde Tektas, Cuneyt Celiktas. Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors. Radiat Sci Technol. 2015;1(1):1-5. doi: 10.11648/j.rst.20150101.11

Copy | Download

@article{10.11648/j.rst.20150101.11,
  author = {Gozde Tektas and Cuneyt Celiktas},
  title = {Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors},
  journal = {Radiation Science and Technology},
  volume = {1},
  number = {1},
  pages = {1-5},
  doi = {10.11648/j.rst.20150101.11},
  url = {https://doi.org/10.11648/j.rst.20150101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.rst.20150101.11},
  abstract = {A virtual oscilloscope was designed by using the LabVIEW software. Signals supplied by a pulse generator and background radiation signals from a NaI(Tl) scintillation detector were displayed in a real and a virtual oscilloscope, respectively. Amplitude, maximum voltage, rise time and fall time values through the oscilloscopes for both type signals were measured. They were acquired in different time/div. values to test and compare their performances. Obtained results and the signal shapes from them were meticulously compared. It was observed that they were highly comparable to  each other. Results indicate  that the developed virtual oscilloscope would reliably be able to be used for data acquisition as well as a real oscilloscope.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors
AU  - Gozde Tektas
AU  - Cuneyt Celiktas
Y1  - 2015/07/17
PY  - 2015
N1  - https://doi.org/10.11648/j.rst.20150101.11
DO  - 10.11648/j.rst.20150101.11
T2  - Radiation Science and Technology
JF  - Radiation Science and Technology
JO  - Radiation Science and Technology
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2575-5943
UR  - https://doi.org/10.11648/j.rst.20150101.11
AB  - A virtual oscilloscope was designed by using the LabVIEW software. Signals supplied by a pulse generator and background radiation signals from a NaI(Tl) scintillation detector were displayed in a real and a virtual oscilloscope, respectively. Amplitude, maximum voltage, rise time and fall time values through the oscilloscopes for both type signals were measured. They were acquired in different time/div. values to test and compare their performances. Obtained results and the signal shapes from them were meticulously compared. It was observed that they were highly comparable to  each other. Results indicate  that the developed virtual oscilloscope would reliably be able to be used for data acquisition as well as a real oscilloscope.
VL  - 1
IS  - 1
ER  -

Copy | Download

Author Information

Gozde Tektas

Ege University, Faculty of Science, Physics Department, Bornova, Izmir, Turkey
Cuneyt Celiktas

Ege University, Faculty of Science, Physics Department, Bornova, Izmir, Turkey

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Gozde Tektas, Cuneyt Celiktas. (2015). Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors. Radiation Science and Technology, 1(1), 1-5. https://doi.org/10.11648/j.rst.20150101.11

Copy | Download

ACS Style

Gozde Tektas; Cuneyt Celiktas. Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors. Radiat. Sci. Technol. 2015, 1(1), 1-5. doi: 10.11648/j.rst.20150101.11

Copy | Download

AMA Style

Gozde Tektas, Cuneyt Celiktas. Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors. Radiat Sci Technol. 2015;1(1):1-5. doi: 10.11648/j.rst.20150101.11

Copy | Download

@article{10.11648/j.rst.20150101.11,
  author = {Gozde Tektas and Cuneyt Celiktas},
  title = {Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors},
  journal = {Radiation Science and Technology},
  volume = {1},
  number = {1},
  pages = {1-5},
  doi = {10.11648/j.rst.20150101.11},
  url = {https://doi.org/10.11648/j.rst.20150101.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.rst.20150101.11},
  abstract = {A virtual oscilloscope was designed by using the LabVIEW software. Signals supplied by a pulse generator and background radiation signals from a NaI(Tl) scintillation detector were displayed in a real and a virtual oscilloscope, respectively. Amplitude, maximum voltage, rise time and fall time values through the oscilloscopes for both type signals were measured. They were acquired in different time/div. values to test and compare their performances. Obtained results and the signal shapes from them were meticulously compared. It was observed that they were highly comparable to  each other. Results indicate  that the developed virtual oscilloscope would reliably be able to be used for data acquisition as well as a real oscilloscope.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Applying Virtual Oscilloscope to Signal Measurements in Scintillation Detectors
AU  - Gozde Tektas
AU  - Cuneyt Celiktas
Y1  - 2015/07/17
PY  - 2015
N1  - https://doi.org/10.11648/j.rst.20150101.11
DO  - 10.11648/j.rst.20150101.11
T2  - Radiation Science and Technology
JF  - Radiation Science and Technology
JO  - Radiation Science and Technology
SP  - 1
EP  - 5
PB  - Science Publishing Group
SN  - 2575-5943
UR  - https://doi.org/10.11648/j.rst.20150101.11
AB  - A virtual oscilloscope was designed by using the LabVIEW software. Signals supplied by a pulse generator and background radiation signals from a NaI(Tl) scintillation detector were displayed in a real and a virtual oscilloscope, respectively. Amplitude, maximum voltage, rise time and fall time values through the oscilloscopes for both type signals were measured. They were acquired in different time/div. values to test and compare their performances. Obtained results and the signal shapes from them were meticulously compared. It was observed that they were highly comparable to  each other. Results indicate  that the developed virtual oscilloscope would reliably be able to be used for data acquisition as well as a real oscilloscope.
VL  - 1
IS  - 1
ER  -

Copy | Download