| Peer-Reviewed

Encapsulated of Red Beet Colour Changes During Spray Drying

Received: 23 July 2020    Accepted: 5 August 2020    Published: 27 August 2020
Views:       Downloads:
Abstract

In this research, the red beet concentrates were encapsulated with maltodextrin (DE10) citric acid, monoglycerides, lecitin and sunflower oil then spray dried at 150, 160, and 170°C. The color of each spray dried powder was diluted to one brix and analysed by spectrophotometer at 510 nm in duplicate which was compared to initial color of concentrated red beet. The deterioration of color loses were behaved first-order reaction and the reaction rates (k) were determined as 0.02, 0.039 and 0.068 sn-1 at 150, 160, and 170°C respectively. Higher spray drying air temperature results in high-speed drying. However, it was determined that high inlet air temperatures caused more pigment loss. From reaction rates the activation energy was estimated about 21.16 Kcal/mol by using of Arrhenius equations. Determined during the degradation of pigments by heat, t1/2 values were found as 31.25 sec, 17.76 sec, 10.01 sec at 150, 160, and 170°C, respectively. It was determined that the color of red beet was so sensitive during spray drying. It was also determined that reaction rate was about two times faster at each drying temperature raise up 10°C, it was also size of the encapculated powder were determined between 1-10 µm by scanning electron microscope.

Published in International Journal of Food Engineering and Technology (Volume 4, Issue 2)
DOI 10.11648/j.ijfet.20200402.11
Page(s) 13-17
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Red Beet, Encapsulation, Spray Dry, Activation Energy, Electron Microscope

References
[1] Khan, M. I. (2016). Stabilization of Betalains: A Review. Food Chemistry 197 1280-1285.
[2] Azeredo, M. C. (2009) Betalains: Properties, Sources, Applications, and Stability-A Review. International Journal of Food Science and Technology, 44, 2365-2376.
[3] Ravichandrana, K., Nay Min Min Thaw Sawa, Adel A. A., Mohdalya, Ahmed, M. M., Gabra, Kastella, A. Riedela, H. Caia, Z. Knorrb, D. Smetanska, I. (2013). Impact of Processing of Red Beet on Betalain Content and Antioxidant Activity. Food Research International, S: 670-675.
[4] Herbach, K. M., Stintzing, F. C., Carle, R. (2006). Betalain stability and degradation-structural and chromatic aspects. Journal of Food Science, 71 (4), 41-50.
[5] Gibbs, B. F., Kermasha, S., Alli, I., and Mulligan, C., N. (1999). Encapsulation in the food industry: a review, International Journal of Food Sciences and Nutrition, 50, 213-224.
[6] Shahidi, F. and Han, X-Q. (1993), Encapsulation of Food Ingredients, Critical Reviews in Food Science and Nutrition, 33 (6), 501-547.
[7] Dubey, R., Shami, T. C., Bhasker-Rao, K. U. (2009). Microencapsulation Technology and Applications. Defence Science Journal, 59 (1), 82-95.
[8] Desai, K. G. H. ve Park, H. J. (2005). Recent developments in microencapsulation of food ingredients. Dry. Technol. Sayı 23, 1361-1394.
[9] Gharsallaoui, A., Gae¨lle Roudaut, O., Chambin, A. V., Saurel, R. (2007). Applications of spray-drying in microencapsulation of food ingredients: An overview. Food Research International, 40, 1107-1121.
[10] Janiszewska, E. (2014). Microencapsulated beetroot juice as a potential source of betalain. Powder Technology, 64, 190-196.
[11] Janiszewska, E., Wlodarczyk, J. (2012). Influence of spray drying conditions on beetroot pigments retention after microencapsulation process. Acta Agrophysica, 20 (2), 343-356.
[12] Athanasia M., Goula and Konstantinos G., Adamopoulos (2003). Spray Drying Performance of a Laboratory Spray Dryer for Tomato Powder Preparation. Drying Technology: An International Journal, Vol. 21, No. 2, 1273-1289.
[13] Cai, Y. Z., Corke, H. (2000). Production and Properties of Spray-dried Amaranthus Betacyanin Pigments. Journal of Food Science, 65 (6), 1248-1252.
[14] Labuza, T. P. (1984), Application of Chemical-Kinetics to Deterioration of Foods, Journal of Chemical Education, 61 (4), 348-358.
[15] Saguy, Saguy, I; Kopelman, I. J. and Mizrahi S. (1978). Thermal Kinetic Degradation of Betanin and Betalamic J. Agric. Food Chem., Vol. 26, No. 2.
[16] Von Elbe, J. H., I. Y. Maing and C. H. Amundson. (1974) Colour stability of betanin. J. Food Science., 39, 334-337.
[17] Yeşil, S. (2018). Süs Elması Antosiyaninlerinin Enkapsülasyonu ve Termal Stabilitesinin Belirlenmesi. Yüksek Lisans Tezi, Selçuk Üniversitesi Fen Bilimleri Entitüsü, 48.
[18] Kirca, A., Ozkan, M. ve Cemeroglu, B. (2006). Stability of black carrot anthocyanins in various fruit juices and nectars. Food Chemistry, 97 (4), 598-605.
[19] Nielsen, S. S., Marcy, J. E. ve Sadler, G. D. (1993). Chemistry of aseptically processed foods, In: Principles of Aseptic Processing and Packaging, Eds: Chambers, J. V. ve Nelson, P. E., Washington, DC: Food Processors Institute, p, 257.
[20] Garcia-Lucas, K. A., Mendez-Lagunas, L. L., Rodriguez-Raminez, J., Campanella, O. H., Patel, B. K., Barriada-Bernal, L. G. (2016). Physical properties of spray dryed Stenocereus griseus pitaya juice powder. Journal of Food Process Engineering, 40, 1-9.
Cite This Article
  • APA Style

    Gulsever Neslihan, Karatas Sukru. (2020). Encapsulated of Red Beet Colour Changes During Spray Drying. International Journal of Food Engineering and Technology, 4(2), 13-17. https://doi.org/10.11648/j.ijfet.20200402.11

    Copy | Download

    ACS Style

    Gulsever Neslihan; Karatas Sukru. Encapsulated of Red Beet Colour Changes During Spray Drying. Int. J. Food Eng. Technol. 2020, 4(2), 13-17. doi: 10.11648/j.ijfet.20200402.11

    Copy | Download

    AMA Style

    Gulsever Neslihan, Karatas Sukru. Encapsulated of Red Beet Colour Changes During Spray Drying. Int J Food Eng Technol. 2020;4(2):13-17. doi: 10.11648/j.ijfet.20200402.11

    Copy | Download

  • @article{10.11648/j.ijfet.20200402.11,
      author = {Gulsever Neslihan and Karatas Sukru},
      title = {Encapsulated of Red Beet Colour Changes During Spray Drying},
      journal = {International Journal of Food Engineering and Technology},
      volume = {4},
      number = {2},
      pages = {13-17},
      doi = {10.11648/j.ijfet.20200402.11},
      url = {https://doi.org/10.11648/j.ijfet.20200402.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfet.20200402.11},
      abstract = {In this research, the red beet concentrates were encapsulated with maltodextrin (DE10) citric acid, monoglycerides, lecitin and sunflower oil then spray dried at 150, 160, and 170°C. The color of each spray dried powder was diluted to one brix and analysed by spectrophotometer at 510 nm in duplicate which was compared to initial color of concentrated red beet. The deterioration of color loses were behaved first-order reaction and the reaction rates (k) were determined as 0.02, 0.039 and 0.068 sn-1 at 150, 160, and 170°C respectively. Higher spray drying air temperature results in high-speed drying. However, it was determined that high inlet air temperatures caused more pigment loss. From reaction rates the activation energy was estimated about 21.16 Kcal/mol by using of Arrhenius equations. Determined during the degradation of pigments by heat, t1/2 values were found as 31.25 sec, 17.76 sec, 10.01 sec at 150, 160, and 170°C, respectively. It was determined that the color of red beet was so sensitive during spray drying. It was also determined that reaction rate was about two times faster at each drying temperature raise up 10°C, it was also size of the encapculated powder were determined between 1-10 µm by scanning electron microscope.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Encapsulated of Red Beet Colour Changes During Spray Drying
    AU  - Gulsever Neslihan
    AU  - Karatas Sukru
    Y1  - 2020/08/27
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ijfet.20200402.11
    DO  - 10.11648/j.ijfet.20200402.11
    T2  - International Journal of Food Engineering and Technology
    JF  - International Journal of Food Engineering and Technology
    JO  - International Journal of Food Engineering and Technology
    SP  - 13
    EP  - 17
    PB  - Science Publishing Group
    SN  - 2640-1584
    UR  - https://doi.org/10.11648/j.ijfet.20200402.11
    AB  - In this research, the red beet concentrates were encapsulated with maltodextrin (DE10) citric acid, monoglycerides, lecitin and sunflower oil then spray dried at 150, 160, and 170°C. The color of each spray dried powder was diluted to one brix and analysed by spectrophotometer at 510 nm in duplicate which was compared to initial color of concentrated red beet. The deterioration of color loses were behaved first-order reaction and the reaction rates (k) were determined as 0.02, 0.039 and 0.068 sn-1 at 150, 160, and 170°C respectively. Higher spray drying air temperature results in high-speed drying. However, it was determined that high inlet air temperatures caused more pigment loss. From reaction rates the activation energy was estimated about 21.16 Kcal/mol by using of Arrhenius equations. Determined during the degradation of pigments by heat, t1/2 values were found as 31.25 sec, 17.76 sec, 10.01 sec at 150, 160, and 170°C, respectively. It was determined that the color of red beet was so sensitive during spray drying. It was also determined that reaction rate was about two times faster at each drying temperature raise up 10°C, it was also size of the encapculated powder were determined between 1-10 µm by scanning electron microscope.
    VL  - 4
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Engineering Faculty, Food Engineering Department, ?stanbul Ayd?n University, Istanbul, Turkey

  • Engineering Faculty, Food Engineering Department, ?stanbul Ayd?n University, Istanbul, Turkey

  • Sections