This study aims to investigate the effect of N719 and Z907 dyes mixture (1:1 v/v ratio) on the DSSCs fabricated successfully using a simple procedure without the need for any complicated facilities. The XRD analysis of the TiO2 layer confirmed that it has a polycrystalline structure belonging to anatase phase with crystallite size of 12.4 nm. UV-Vis spectroscopy was used to characterize the absorbance spectra of the TiO2 layer, N719 dye, Z907 dye, dyes mixture and the fabricated DSSCs as well. The absorption spectra in the wavelength range of (350-750) nm show that the DSSC fabricated with dyes mixture has higher absorption compared to the other two cells. The dyes mixture performs better than the individual dyes due to the broadening of its UV-Vis spectrum in the blue region. The energy gap of the TiO2 layer estimated by Tauc’s plot was 3.12 eV. The SEM micrograph of the TiO2 layer shows that the layer has a spongy shape with reduction in the number of open pores making easy for dye adsorption and electron transport. The average roughness, root mean square roughness and grain size of the TiO2 layer estimated from the AFM micrograph and the granularity cumulative distribution chart were about 0.356 nm, 0.423 nm and 82.48 nm respectively. Solar cells with efficiency as high as 2.287% have been achieved using the dyes mixture as sensitizer which represents an enhancement of ~ 70% and ~ 106% compared to the DSSCs efficiencies prepared by N719 and Z907 dyes respectively.
| Published in | Journal of Photonic Materials and Technology (Volume 2, Issue 3) |
| DOI | 10.11648/j.jmpt.20160203.11 |
| Page(s) | 20-24 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
DSSC, N719 Dye, Z907 Dye, Dyes Mixture, Conversion Efficiency
| [1] | N. M. Nursama and L. Muliani, "Investigation of photoelectrode materials influences in titania-based–dye sensitized solar cells", International Journal of Technology, Vol. 2, pp.129-139, (2012). |
| [2] | T. G. Deepak, G. S. Anjusree, K. N. Pai, D. Subash, S. V. Nair, and A. S. Nair, "Fabrication of a dye-sensitized solar cell module using spray pyrolysis deposition of a TiO2 colloid", RSC Advances, Vol. 4, pp. 23299–23303, (2014). |
| [3] | A. Lim, N. Haji Manaf, K. Tennakoon, R. L. N. Chandrakanthi, L. B. L. Lim, J. M. R. S. Bandara, and P. Ekanayake, "Higher Performance of DSSC with Dyes from Cladophora sp. as Mixed Cosensitizer through Synergistic Effect", Journal of Biophysics, Vol. 2015, ID 510467, pp.1-8, (2015(. |
| [4] | K. Guo, M. Li, X. Fang, X. Liu, B. Sebo, Y. Zhu, Z. Hu, and X. Zhao, "Preparation and enhanced properties of dye-sensitized solar cells by surface plasmon resonance of Ag nanoparticles in nanocomposite photoanode", Journal of Power Sources, Vol. 230, pp. 155-160, (2013). |
| [5] | T. Y. Lee, P. S. Alegaonkar, and J. B. Yoo, "Fabrication of dye sensitized solar cell using TiO2 coated carbon nanotubes", Thin Solid Films, Vol. 515, pp. 5131–5135, (2007). |
| [6] | S. N. Karthick, K. V. Hemalatha, C. J. Raj, H. J. Kim, and Y. Moonsuk, "Titanium dioxide paste preparation for dye sensitized solar cell using hydrothermal technique", Journal of Ceramic Processing Research, Vol. 13, pp.136-139, (2012). |
| [7] | H. Cheema, A. Islam, L. Han, and A. El-Shafei,"Monodentate pyrazole as a replacement of labile NCS for Ru (II) photosensitizers: Minimum electron injection free energy for dye-sensitized solar cells", Dyes and Pigments, Vol. 120, pp. 93-98, (2015). |
| [8] | M. Gratzel, "Progress in Ruthenium Complexes for Dye Sensitised Solar Cells", Platinum Metals Rev., Vol. 53, No. 4, pp. 216–218, (2009). |
| [9] | I. C. Berkman, "Investigation of the electronic structure of the ruthenium dyes used in solar cells by combining hartree- fock theory with the quantum monte carlo technique", MSc. Thesis, (2015). |
| [10] | G. Y. Margulis , B. E. Hardin , I. K. Ding , E. T. Hoke, and M. D. McGehee, "Parasitic Absorption and Internal Quantum Efficiency Measurements of Solid-State Dye Sensitized Solar Cells", Adv. Energy Mater, Vol. 3, pp. 959–966, (2013). |
| [11] | Paolo Salvatori, Gabriele Marotta, Antonio Cinti, Chiara Anselmi, Edoardo Mosconi, and Filippo De Angelis, "Supramolecular Interactions of Chenodeoxycholic Acid Increase the Efficiency of Dye-Sensitized Solar Cells Based on a Cobalt Electrolyte", Journal of Physical Chemistry C, Vol. 117, pp. 3874-3887, (2013). |
| [12] | J. Bandara and H. Weerasinghe, "Design of high-efficiency solid-state dye sensitized solar cells using coupled dye mixtures", Solar Energy Materials & Solar Cells, Vol. 90, pp. 864–871, (2006). |
| [13] | R. Vijayalakshmi and V. Rajendran, "Synthesis and characterization of nano-TiO2 via different methods", Archives of Applied Science Research, Vol. 4 (2), pp. 1183-1190, (2012). |
| [14] | Y. Wang, L. Li, X. Huang, Q. Lia and G. Li, "New insights into fluorinated TiO2 (brookite, anatase and rutile) nanoparticles as efficient photocatalytic redox catalysts", RSC Advances, Vol. 5 (43), pp. 34302-34313, (2015). |
| [15] | C. H. Wei and C. M. Chang, "Polycrystalline TiO2 thin films with different thicknesses deposited on unheated substrates using RF magnetron sputtering", Materials Transactions, Vol. 52 (3), pp. 554-559, (2011). |
| [16] | H. Sh. Wu, and Y. L. Wang, "Effects of annealing temperature on the structure and properties of TiO2 nanofilm materials", Advanced Materials Research, Vol. 531, pp. 203-206, (2012). |
| [17] | R. Tagliaferro, D. Colonna, T. M. Brown, A. Reale, and A. D. Carlo, "Interplay between transparency and efficiency in dye sensitized solar cells", Optics express, Vol. 21 (3), pp. 3235-3242, (2013). |
APA Style
Abdulrahman K. Ali, Nabeel A. Bakr, Shaimaa M. Jassim. (2016). Fabrication of Dye Sensitized Solar Cell and Efficiency Enhancement by Using N719 and Z907 Dyes Mixture. Journal of Photonic Materials and Technology, 2(3), 20-24. https://doi.org/10.11648/j.jmpt.20160203.11
ACS Style
Abdulrahman K. Ali; Nabeel A. Bakr; Shaimaa M. Jassim. Fabrication of Dye Sensitized Solar Cell and Efficiency Enhancement by Using N719 and Z907 Dyes Mixture. J. Photonic Mater. Technol. 2016, 2(3), 20-24. doi: 10.11648/j.jmpt.20160203.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.jmpt.20160203.11,
author = {Abdulrahman K. Ali and Nabeel A. Bakr and Shaimaa M. Jassim},
title = {Fabrication of Dye Sensitized Solar Cell and Efficiency Enhancement by Using N719 and Z907 Dyes Mixture},
journal = {Journal of Photonic Materials and Technology},
volume = {2},
number = {3},
pages = {20-24},
doi = {10.11648/j.jmpt.20160203.11},
url = {https://doi.org/10.11648/j.jmpt.20160203.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jmpt.20160203.11},
abstract = {This study aims to investigate the effect of N719 and Z907 dyes mixture (1:1 v/v ratio) on the DSSCs fabricated successfully using a simple procedure without the need for any complicated facilities. The XRD analysis of the TiO2 layer confirmed that it has a polycrystalline structure belonging to anatase phase with crystallite size of 12.4 nm. UV-Vis spectroscopy was used to characterize the absorbance spectra of the TiO2 layer, N719 dye, Z907 dye, dyes mixture and the fabricated DSSCs as well. The absorption spectra in the wavelength range of (350-750) nm show that the DSSC fabricated with dyes mixture has higher absorption compared to the other two cells. The dyes mixture performs better than the individual dyes due to the broadening of its UV-Vis spectrum in the blue region. The energy gap of the TiO2 layer estimated by Tauc’s plot was 3.12 eV. The SEM micrograph of the TiO2 layer shows that the layer has a spongy shape with reduction in the number of open pores making easy for dye adsorption and electron transport. The average roughness, root mean square roughness and grain size of the TiO2 layer estimated from the AFM micrograph and the granularity cumulative distribution chart were about 0.356 nm, 0.423 nm and 82.48 nm respectively. Solar cells with efficiency as high as 2.287% have been achieved using the dyes mixture as sensitizer which represents an enhancement of ~ 70% and ~ 106% compared to the DSSCs efficiencies prepared by N719 and Z907 dyes respectively.},
year = {2016}
}
TY - JOUR T1 - Fabrication of Dye Sensitized Solar Cell and Efficiency Enhancement by Using N719 and Z907 Dyes Mixture AU - Abdulrahman K. Ali AU - Nabeel A. Bakr AU - Shaimaa M. Jassim Y1 - 2016/10/28 PY - 2016 N1 - https://doi.org/10.11648/j.jmpt.20160203.11 DO - 10.11648/j.jmpt.20160203.11 T2 - Journal of Photonic Materials and Technology JF - Journal of Photonic Materials and Technology JO - Journal of Photonic Materials and Technology SP - 20 EP - 24 PB - Science Publishing Group SN - 2469-8431 UR - https://doi.org/10.11648/j.jmpt.20160203.11 AB - This study aims to investigate the effect of N719 and Z907 dyes mixture (1:1 v/v ratio) on the DSSCs fabricated successfully using a simple procedure without the need for any complicated facilities. The XRD analysis of the TiO2 layer confirmed that it has a polycrystalline structure belonging to anatase phase with crystallite size of 12.4 nm. UV-Vis spectroscopy was used to characterize the absorbance spectra of the TiO2 layer, N719 dye, Z907 dye, dyes mixture and the fabricated DSSCs as well. The absorption spectra in the wavelength range of (350-750) nm show that the DSSC fabricated with dyes mixture has higher absorption compared to the other two cells. The dyes mixture performs better than the individual dyes due to the broadening of its UV-Vis spectrum in the blue region. The energy gap of the TiO2 layer estimated by Tauc’s plot was 3.12 eV. The SEM micrograph of the TiO2 layer shows that the layer has a spongy shape with reduction in the number of open pores making easy for dye adsorption and electron transport. The average roughness, root mean square roughness and grain size of the TiO2 layer estimated from the AFM micrograph and the granularity cumulative distribution chart were about 0.356 nm, 0.423 nm and 82.48 nm respectively. Solar cells with efficiency as high as 2.287% have been achieved using the dyes mixture as sensitizer which represents an enhancement of ~ 70% and ~ 106% compared to the DSSCs efficiencies prepared by N719 and Z907 dyes respectively. VL - 2 IS - 3 ER -
Information
Email: