Corrosion Behavior of AA5038 Nanostructured Aluminum Alloy Produced by Accumulative Roll-Bonding
Nanoscience and Nanometrology
Volume 4, Issue 2, December 2018, Pages: 34-40
Received: Jul. 13, 2018;
Accepted: Sep. 30, 2018;
Published: Oct. 27, 2018
Views 670 Downloads 39
Ali Torkan, Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran
Amin Rabiei Baboukani, Advanced Materials Research Center, Faculty of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
Iman Khakpour, School of Metallurgy and Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran
Accumulative roll bonding is the only severe plastic deformation process for the industrial production of ultrafine grained sheets with desirable mechanical properties. In the present research, corrosion behavior of nanostructured 5083 Aluminum alloy produced by Accumulative Roll Bonding (ARB) was carried out in 3.5% NaCl solution. Potentiodynamic Polarization tests and electrochemical impedance spectrometry were used to evaluate corrosion behavior of samples and immersion test was applied to evaluate intergranular corrosion behavior. The ARB process was successfully performed up to 6 cycles on 5083 aluminum alloy sheet. In early stages of ARB process, main grains were isolated by boundaries resulted from transformation and then layer structure composed of layer boundaries parallel to the rolling direction was created by increasing ARB cycle. By increasing the cycles distance between layer boundaries is decreased and finally by increasing strain more up to four cycles a structure made up of grains with nano grain size was obtained in result of occurrence of In-situ recrystallization. According to the electrochemical corrosion tests, by increasing number of passes in ARB process, the corrosion current density and corrosion rate was increased. Immersion test also revealed that the aluminum alloy annealed in 413°C and ARB samples are not sensitive to intergranular corrosion.
Amin Rabiei Baboukani,
Corrosion Behavior of AA5038 Nanostructured Aluminum Alloy Produced by Accumulative Roll-Bonding, Nanoscience and Nanometrology.
Vol. 4, No. 2,
2018, pp. 34-40.
Talbot DE, Talbot JD (2018) Corrosion science and technology. CRC press.
Sielski RA (2008) Research needs in aluminum structure. Ships and Offshore Structures 3 (1):57-65.
Mohammadi M, Javadpoura S, Kobayashi A, Shirvani K, Jenabali Jahromi A, Khakpour I (2011) Cyclic oxidation behavior of CoNiCrAlY coatings produced by LVPS and HVOF processes. Transactions of JWRI 40 (1):53-58.
Scamans G, Holroyd N, Tuck C (1987) The role of magnesium segregation in the intergranular stress corrosion cracking of aluminium alloys. Corrosion Science 27 (4):329-347.
Jones RH, Vetrano JS, Windisch Jr C (2004) Stress corrosion cracking of Al-Mg and Mg-Al alloys. Corrosion 60 (12):1144-1154.
Jones R, Baer D, Danielson M, Vetrano J (2001) Role of Mg in the stress corrosion cracking of an Al-Mg alloy. Metallurgical and Materials Transactions A 32 (7):1699-1711.
Yukawa H, Murata Y, Morinaga M, Takahashi Y, Yoshida H (1995) Heterogeneous distributions of Magnesium atoms near the precipitate in Al-Mg based alloys. Acta metallurgica et materialia 43 (2):681-688.
Pickens J, Gordon J, Green J (1983) The effect of loading mode on the stress-corrosion cracking of aluminum alloy 5083. Metallurgical Transactions A 14 (4):925-930.
Khakpour I, Soltani R, Sohi MH (2015) Microstructure and high temperature oxidation behaviour of Zr-doped aluminide coatings fabricated on nickel-based super alloy. Procedia Materials Science 11:515-521.
Valiev RZ, Langdon TG (2006) Principles of equal-channel angular pressing as a processing tool for grain refinement. Progress in materials science 51 (7):881-981.
Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Bulk nanostructured materials from severe plastic deformation. Progress in materials science 45 (2):103-189.
Foroughi P, Rabiei Baboukani A, Franco Hernandez A, Wang C, Cheng Z (2018) Phase Control during Synthesis of Nanocrystalline Ultrahigh Temperature Tantalum‐Hafnium Diboride Powders. Journal of the American Ceramic Society.
Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta materialia 47 (2):579-583.
Eizadjou M, Manesh HD, Janghorban K (2009) Microstructure and mechanical properties of ultra-fine grains (UFGs) aluminum strips produced by ARB process. Journal of Alloys and Compounds 474 (1-2):406-415.
Naeini MF, Shariat MH, Eizadjou M (2011) On the chloride-induced pitting of ultra fine grains 5052 aluminum alloy produced by accumulative roll bonding process. Journal of Alloys and Compounds 509 (14):4696-4700.
Wei W, Wei KX, Du QB (2007) Corrosion and tensile behaviors of ultra-fine grained Al–Mn alloy produced by accumulative roll bonding. Materials Science and Engineering: A 454:536-541.
Tsuji N, Ito Y, Saito Y, Minamino Y (2002) Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing. Scripta Materialia 47 (12):893-899.
Rezayan AH, Firoozi N, Kheirjou S, Rezaei SJT, Nabid MR (2017) Synthesis and Characterization of Biodegradable Semi-Interpenetrating Polymer Networks Based on Star-Shaped Copolymers of ɛ-Caprolactone and Lactide. Iranian journal of pharmaceutical research: IJPR 16(1):63.
ASTM International WC, PA. (2004) ASTM G67-04, “Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)”.
Firoozi N, Rezayan AH, Tabatabaei Rezaei SJ, Mir-Derikvand M, Nabid MR, Nourmohammadi J, Mohammadnejad Arough J (2017) Synthesis of poly (ε-caprolactone)-based polyurethane semi-interpenetrating polymer networks as scaffolds for skin tissue regeneration. International Journal of Polymeric Materials and Polymeric Biomaterials 66(16):805-811.
Zolfaghari S, Baboukani AR, Ashrafi A, Saatchi A (2018) Investigation the effects of Na2MoO4 as an inhibitor on electrochemical corrosion behavior of 316L stainless steel in LiBr solution. Zaštita materijala 59 (1):108-116.
Baboukani AR, Sharifi E, Akhavan S, Saatchi A (2016) Co complexes as a corrosion inhibitor for 316 l stainless steel in H2SO4 solution. Journal of Materials Science and Chemical Engineering 4 (09):28.
Hassannejad H, Moghaddasi M, Saebnoori E, Baboukani AR (2017) Microstructure, deposition mechanism and corrosion behavior of nanostructured cerium oxide conversion coating modified with chitosan on AA2024 aluminum alloy. Journal of Alloys and Compounds 725:968-975.
Baboukani AR, Saatchi A, Wang C Electrochemical Corrosion Behavior of Ti-6Al-4V Alloy Using Akermanite As a Bioceramic Coating. In: Meeting Abstracts, 2018. vol 14. The Electrochemical Society, pp 1043-1043.
Saberi F, Boroujeny BS, Doostmohamdi A, Baboukani AR, Asadikiya M (2018) Electrophoretic deposition kinetics and properties of ZrO2 nano coatings. Materials Chemistry and Physics 213:444-454.
Sharma MM, Ziemian CW (2008) Pitting and stress corrosion cracking susceptibility of nanostructured Al-Mg alloys in natural and artificial environments. Journal of materials engineering and performance 17 (6):870-878.
Khoshkhou Z, Torkghashghaei M, Baboukani AR (2018) Corrosion Inhibition of Henna Extract on Carbon Steel with Hybrid Coating TMSM-PMMA in HCL Solution. Open Journal of Synthesis Theory and Applications 7 (01):1.
Fadavi M, Baboukani AR, Edris H, Salehi M (2018) Study on High-Temperature Oxidation Behaviors of Plasma-Sprayed TiB2-Co Composite Coatings. Journal of the Korean Ceramic Society 55 (2):178-184.
Schacht M, Boukis N, Dinjus E (2000) Corrosion of alumina ceramics in acidic aqueous solutions at high temperatures and pressures. Journal of materials science 35 (24):6251-6258.
Yasakau K, Zheludkevich M, Ferreira M (2017) Role of intermetallics in corrosion of aluminum alloys. Smart corrosion protection. In: Intermetallic Matrix Composites. Elsevier, pp 425-462.
Baboukani AR, Adelowo E, Agrawal R, Khakpour I, Drozd V, Li W, Wang C (2018) Electrostatic Spray Deposited Sn-SnO2-CNF Composite Anodes for Lithium Ion Storage. ECS Transactions 85 (13):331-336.
Tsuji N, Saito Y, Lee SH, Minamino Y (2003) ARB (Accumulative Roll‐Bonding) and other new techniques to produce bulk ultrafine grained materials. Advanced Engineering Materials 5 (5):338-344.
Holtz RL, Goswami R, Pao PS (2015) Sensitization of Naturally Aged Aluminum 5083 Armor Plate. NAVAL RESEARCH LAB WASHINGTON DC MATERIALS SCIENCE AND TECHNOLOGY DIV.
Gashti S, Fattah-Alhosseini A, Mazaheri Y, Keshavarz M (2016) Effects of grain size and dislocation density on strain hardening behavior of ultrafine grained AA1050 processed by accumulative roll bonding. Journal of Alloys and Compounds 658:854-861.
Kassner M, Barrabes S (2005) New developments in geometric dynamic recrystallization. Materials Science and Engineering: A 410:152-155.
Li BL, Tsuji N, Minamino Y Microstructural evolution in 36% Ni austenitic steel during the ARB process. In: Materials science forum, 2006. Trans Tech Publ, pp 73-78.
Gholinia A, Humphreys F, Prangnell P (2002) Production of ultra-fine grain microstructures in Al–Mg alloys by coventional rolling. Acta materialia 50 (18):4461-4476.
Rollett A, Humphreys F, Rohrer GS, Hatherly M (2004) Recrystallization and related annealing phenomena. Elsevier.
Moschouris K, Firoozi N, Kang Y, (2016) The application of cell sheet engineering in the vascularization of tissue regeneration. 11 (6): 559-570.