Effect of the High Temperature Resistant Nano-Coolant on Automotive Engine Operation
Nanoscience and Nanometrology
Volume 5, Issue 1, June 2019, Pages: 1-5
Received: Aug. 20, 2018;
Accepted: Dec. 13, 2018;
Published: Jan. 24, 2019
Views 702 Downloads 115
Xin Sha, Wuhan Ucan Nano Fluid Technology Co. Ltd., Wuhan, China
Lu Ruirui, Wuhan Ucan Nano Fluid Technology Co. Ltd., Wuhan, China
He Yan, Wuhan Ucan Nano Fluid Technology Co. Ltd., Wuhan, China
Xu Changming, Wuhan Ucan Nano Fluid Technology Co. Ltd., Wuhan, China
Luo Yi, Department of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan, China
Follow on us
An engine nano-coolant without agglomeration was developed, which was heated to 120 degrees and kept for 15 consecutive days, and has good anti-corrosion, and better thermal conductivity in flow compared with the conventional engine coolant. The results of engine bench scale test, vehicle driving and construction machinery test and exhaust emission test show that the fuel saving rate of the car on the expressway is 5-15%, the fuel consumption of construction machinery decreases by 12.77%, and the temperature of the water tank decreases by 8.17°C on average in summer without the help of natural wind. In addition, the emission of CO and HC during the driving process also decreases by 7.8-13% and 0-19% respectively, which proves that nano-fluids can significantly increase engine combustion efficiency, prevent engine from overheating at high temperature and reduce exhaust emissions, and will replace the ordinary ethylene glycol-water products as a new type of engine coolant with high thermal conductivity.
Nano-Coolant, Automobile, Excavator, Fuel-Saving Rate, Tail Gas Pollution, Heat Exchange Efficiency
To cite this article
Effect of the High Temperature Resistant Nano-Coolant on Automotive Engine Operation, Nanoscience and Nanometrology.
Vol. 5, No. 1,
2019, pp. 1-5.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
P Keblinski, J A Eastman, D G Cahill. “Nanofluids for thermal transport”, Materials Today, vol. 8, no. 6, 36-44. 2005.
S Choi. “Nanofluids: a new field of scientific research and innovative applications”, Heat Transfer Engineering, vol 29 no 5, 429-431, 2008.
W Yu, D M France, J L Routbort. “Review and comparison of nanofluid thermal conductivity and heat transfer enhancements”, Heat Transfer Engineering, vol 29 no 5, 432-460, 2008.
D Wen, G Lin, S Vafaei. “Review of nanofluids for heat transfer applications”, Particuology, vol 7 no 2, 141-150, 2007.
S Choi. “Nanofluids for improved efficiency in cooling systems for heavy vehicle systems review” USA: Argonne National Laboratory, 18-20, 2006.
H. Xie, W. Yu, Y. Li, L. Chen. “Discussion on the thermal conductivity enhancement of nanofluids”, Nanoscale Res. Lett. vol 6 no 1, 1–12, 2011.
A. N. Al-Shamani, M. H. Yazdi, M. Alghoul, A. M. Abed, M. Ruslan, S. Mat, K. Sopian. “Nanofluids for improved efficiency in cooling solar collectors–a review”, Renew. Sust. Energ. Rev. vol 38, 348–367, 2014.
M. J. Pastoriza-Gallego, L. Lugo, D. Cabaleiro, J. L. Legido, M. M. Piñeiro. “Thermophysical profile of ethylene glycol-based ZnO nanofluids”, J. Chem. Thermodyn. Vol 73, 23–30, 2014.
B. Buonomo, O. Manca, L. Marinelli, S. Nardini. “Effect of temperature and sonication time nanofluid thermal conductivity measurements by nano-flash method”, Appl. Therm. Eng. Vol 91, 181–190, 2015.
Q S He, Y Luo. “The preparation method and application for a nanofluid heat transfer agent”, CN 201610374971.1. 2016-05-31.
D. Devices. KD2 Pro Thermal Properties Analyzer Operator's Manual Version 4, Decagon Devices, Inc., Pullman, WA, USA, 1–67, 2015.