A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor

Youssef Kassem; Hüseyin Çamur

doi:doi:10.11648/j.ajme.20170306.11

| Peer-Reviewed

A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor

Youssef Kassem, Hüseyin Çamur

Published in American Journal of Modern Energy (Volume 3, Issue 6)

Received: 5 October 2017 Accepted: 19 October 2017 Published: 23 November 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In the present study, a new model of Savonius wind turbine has been designed to increase the low performance of the Savonius wind rotor, a type of vertical-axis wind rotor, and the effect of wind speed on the static rotor performance has been analyzed numerically using solid-work flow simulation (SWFS). SWFS is based on the Reynolds Averaged Navier-Stokes (RANS) equations with the standard k-ε turbulence model. These equations were solved by a finite volume discretization method. Further, the effects of rotor geometries and end plate on static torque are also discussed. In order to clarify the new designed of the rotor, static torque was measured with various blade sizes and end plate shape. From the study, found that the use of both upper and lower end plats significantly increase the torque by 40% compared with no end plates. Additionally, it was also observed that the torque of rotors increases proportionally to blade size and end plate shapes. Moreover, the results showed that model 2 has produced more torque compared to other models.

Published in	American Journal of Modern Energy (Volume 3, Issue 6)
DOI	10.11648/j.ajme.20170306.11
Page(s)	115-120
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Savonius Wind Turbine, SWFS, Vertical Axis Wind Turbine, Torque

References

[1]	Modi, V. J., Roth, N. J., & Pittalwala, A. (1983). Blade Configurations and Performance of the Savonius Rotor With Application to an Irrigation System in Indonesia. Journal of Solar Energy Engineering, 105 (3), 294. doi: 10.1115/1.3266381.
[2]	Clark, R., Nelson, V., & Barieau, R. (1980). Wind turbines for irrigation pumping. Wind Energy Conference. doi:10.2514/6.1980-639.
[3]	Modi, V., Fernando, M., & Yokomizo, T. (1998). An integrated approach to design of a wind energy operated irrigation system. 1998 ASME Wind Energy Symposium. doi:10.2514/6.1998-41.
[4]	Vishwakarma, R. (1999). Savonius rotor wind turbine for water pumping—an alternate energy source for rural sites. Journal of Institution of Engineers (India), 79.
[5]	Reupke, P., & Probert, S. (1991). Slatted-blade Savonius wind-rotors. Applied Energy, 40 (1), 65-75. doi:10.1016/0306-2619 (91)90051-x.
[6]	Ushiyama I, Nagai H, & Mino M. (1982). The optimum design configurations of Savonius wind turbines. In: Proceedings of 17th intersociety energy conversion engineering conference, 2096–101.
[7]	Sayers, A. T. (1985). Blade Configuration Optimization and Performance Characteristics of a Simple Savonius Rotor. Proceedings of the Institution of Mechanical Engineers, Part A: Power and Process Engineering, 199 (3), 185-191. doi:10.1243/pime_proc_1985_199_023_02.
[8]	Sheldahl, R., Feltz, L., & BLACKWELL, B. (1978). Wind tunnel performance data for two- and three-bucket Savonius rotors. Journal of Energy, 2(3), 160-164. doi:10.2514/3.47966.
[9]	Modi, V., & Fernando, M. (1989). Modi VJ, Fernando MSUK. On the performance of the Savonius wind turbine. ASME Journal of Solar Energy Engineering, 111, 71-81.
[10]	Choudhury, B., & Saraf, G. (2014). Computational Analysis of Flow around a Two-Bladed Savonius Rotor. ISESCO JOURNAL of Science and Technology, 10 (17), 39-48.
[11]	Kacprzak, K., Liskiewicz, G., & Sobczak, K. (2013). Numerical investigation of conventional and modified Savonius wind turbines. Renewable Energy, 60, 578-585. doi:10.1016/j.renene.2013.06.009.
[12]	Jeon, K. S., Jeong, J. I., Pan, J., & Ryu, K. (2015). Effects of end plates with various shapes and sizes on helical Savonius wind turbines. Renewable Energy, 79, 167-176. doi:10.1016/j.renene.2014.11.035.
[13]	Driss, Z., Mlayeh, O., Driss, S., Driss, D., Maaloul, M., & Abid, M. S. (2015). Study of the bucket design effect on the turbulent flow around unconventional Savonius wind rotors. Energy, 89,708-729. doi:10.1016/j.energy.2015.06.023.
[14]	Frikha, S., Driss, Z., Ayadi, E., Masmoudi, Z., & Abid, M. S. (2016). Numerical and experimental characterization of multi-stage Savonius rotors. Energy, 114, 382-404. doi:10.1016/j.energy.2016.08.017.
[15]	Sun, D. W. (2007). Computational fluid dynamics in food processing. Boca Raton, FL: Taylor & Francis.
[16]	Sathyajith, M. (2014). Wind Energy: Fundamentals, Resource Analysis and Economics. Berlin: Springer Berlin.
[17]	Hemami, A. (2012). Wind turbine technology. Clifton Park, NY: Delmar, Cengage Learning.

Cite This Article

Plain Text BibTeX RIS

APA Style

Youssef Kassem, Hüseyin Çamur. (2017). A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor. American Journal of Modern Energy, 3(6), 115-120. https://doi.org/10.11648/j.ajme.20170306.11

Copy | Download

ACS Style

Youssef Kassem; Hüseyin Çamur. A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor. Am. J. Mod. Energy 2017, 3(6), 115-120. doi: 10.11648/j.ajme.20170306.11

Copy | Download

AMA Style

Youssef Kassem, Hüseyin Çamur. A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor. Am J Mod Energy. 2017;3(6):115-120. doi: 10.11648/j.ajme.20170306.11

Copy | Download

@article{10.11648/j.ajme.20170306.11,
  author = {Youssef Kassem and Hüseyin Çamur},
  title = {A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor},
  journal = {American Journal of Modern Energy},
  volume = {3},
  number = {6},
  pages = {115-120},
  doi = {10.11648/j.ajme.20170306.11},
  url = {https://doi.org/10.11648/j.ajme.20170306.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajme.20170306.11},
  abstract = {In the present study, a new model of Savonius wind turbine has been designed to increase the low performance of the Savonius wind rotor, a type of vertical-axis wind rotor, and the effect of wind speed on the static rotor performance has been analyzed numerically using solid-work flow simulation (SWFS). SWFS is based on the Reynolds Averaged Navier-Stokes (RANS) equations with the standard k-ε turbulence model. These equations were solved by a finite volume discretization method. Further, the effects of rotor geometries and end plate on static torque are also discussed. In order to clarify the new designed of the rotor, static torque was measured with various blade sizes and end plate shape. From the study, found that the use of both upper and lower end plats significantly increase the torque by 40% compared with no end plates. Additionally, it was also observed that the torque of rotors increases proportionally to blade size and end plate shapes. Moreover, the results showed that model 2 has produced more torque compared to other models.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor
AU  - Youssef Kassem
AU  - Hüseyin Çamur
Y1  - 2017/11/23
PY  - 2017
N1  - https://doi.org/10.11648/j.ajme.20170306.11
DO  - 10.11648/j.ajme.20170306.11
T2  - American Journal of Modern Energy
JF  - American Journal of Modern Energy
JO  - American Journal of Modern Energy
SP  - 115
EP  - 120
PB  - Science Publishing Group
SN  - 2575-3797
UR  - https://doi.org/10.11648/j.ajme.20170306.11
AB  - In the present study, a new model of Savonius wind turbine has been designed to increase the low performance of the Savonius wind rotor, a type of vertical-axis wind rotor, and the effect of wind speed on the static rotor performance has been analyzed numerically using solid-work flow simulation (SWFS). SWFS is based on the Reynolds Averaged Navier-Stokes (RANS) equations with the standard k-ε turbulence model. These equations were solved by a finite volume discretization method. Further, the effects of rotor geometries and end plate on static torque are also discussed. In order to clarify the new designed of the rotor, static torque was measured with various blade sizes and end plate shape. From the study, found that the use of both upper and lower end plats significantly increase the torque by 40% compared with no end plates. Additionally, it was also observed that the torque of rotors increases proportionally to blade size and end plate shapes. Moreover, the results showed that model 2 has produced more torque compared to other models.
VL  - 3
IS  - 6
ER  -

Copy | Download

Author Information

Youssef Kassem

Department of Mechanical Engineering, Faculty of Engineering, Near East University, Nicosia, Cyprus
Hüseyin Çamur

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Youssef Kassem, Hüseyin Çamur. (2017). A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor. American Journal of Modern Energy, 3(6), 115-120. https://doi.org/10.11648/j.ajme.20170306.11

Copy | Download

ACS Style

Youssef Kassem; Hüseyin Çamur. A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor. Am. J. Mod. Energy 2017, 3(6), 115-120. doi: 10.11648/j.ajme.20170306.11

Copy | Download

AMA Style

Youssef Kassem, Hüseyin Çamur. A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor. Am J Mod Energy. 2017;3(6):115-120. doi: 10.11648/j.ajme.20170306.11

Copy | Download

@article{10.11648/j.ajme.20170306.11,
  author = {Youssef Kassem and Hüseyin Çamur},
  title = {A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor},
  journal = {American Journal of Modern Energy},
  volume = {3},
  number = {6},
  pages = {115-120},
  doi = {10.11648/j.ajme.20170306.11},
  url = {https://doi.org/10.11648/j.ajme.20170306.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajme.20170306.11},
  abstract = {In the present study, a new model of Savonius wind turbine has been designed to increase the low performance of the Savonius wind rotor, a type of vertical-axis wind rotor, and the effect of wind speed on the static rotor performance has been analyzed numerically using solid-work flow simulation (SWFS). SWFS is based on the Reynolds Averaged Navier-Stokes (RANS) equations with the standard k-ε turbulence model. These equations were solved by a finite volume discretization method. Further, the effects of rotor geometries and end plate on static torque are also discussed. In order to clarify the new designed of the rotor, static torque was measured with various blade sizes and end plate shape. From the study, found that the use of both upper and lower end plats significantly increase the torque by 40% compared with no end plates. Additionally, it was also observed that the torque of rotors increases proportionally to blade size and end plate shapes. Moreover, the results showed that model 2 has produced more torque compared to other models.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - A Numerical Study of a Newly Developed of Savonius Wind Turbine Style on Increasing the Performance of Savonius Wind Rotor
AU  - Youssef Kassem
AU  - Hüseyin Çamur
Y1  - 2017/11/23
PY  - 2017
N1  - https://doi.org/10.11648/j.ajme.20170306.11
DO  - 10.11648/j.ajme.20170306.11
T2  - American Journal of Modern Energy
JF  - American Journal of Modern Energy
JO  - American Journal of Modern Energy
SP  - 115
EP  - 120
PB  - Science Publishing Group
SN  - 2575-3797
UR  - https://doi.org/10.11648/j.ajme.20170306.11
AB  - In the present study, a new model of Savonius wind turbine has been designed to increase the low performance of the Savonius wind rotor, a type of vertical-axis wind rotor, and the effect of wind speed on the static rotor performance has been analyzed numerically using solid-work flow simulation (SWFS). SWFS is based on the Reynolds Averaged Navier-Stokes (RANS) equations with the standard k-ε turbulence model. These equations were solved by a finite volume discretization method. Further, the effects of rotor geometries and end plate on static torque are also discussed. In order to clarify the new designed of the rotor, static torque was measured with various blade sizes and end plate shape. From the study, found that the use of both upper and lower end plats significantly increase the torque by 40% compared with no end plates. Additionally, it was also observed that the torque of rotors increases proportionally to blade size and end plate shapes. Moreover, the results showed that model 2 has produced more torque compared to other models.
VL  - 3
IS  - 6
ER  -

Copy | Download