| Peer-Reviewed

Use of Lagenaria Siceraria Seed Oil for the Production of Environmentally Friendly Biolubricant

Received: 3 September 2018    Accepted: 14 September 2018    Published: 12 October 2018
Views:       Downloads:
Abstract

The needs for environmentally friendly energy sources, coupled with the depleted fossil oil reserves, have generated interests in the search for world’s alternative energy sources, and vegetable oils seem to be the best options. This study assesses the use of Lagenaria siceraria seed oil (LSSO) as a potential source of environmentally friendly biolubricant. The LSSO was extracted from the Lagenaria siceraria seed (LSS) using Soxhlet apparatus, and a yield of 41.70% was obtained, with n-hexane as the extracting solvent. The physicochemical parameters of LSSO were assayed to confirm its potential for the production of environmentally friendly biolubricant. The result showed that the kinematic viscosities of 6.24±0.10cSt (at 100°C) and 21.74±0.02 cSt (at 40°C) were obtained, while the viscosity index (266±0.00) was also obtained. An experiment was designed (Mixture Design Method using Minitab 17) to obtain the proportion of LSSO (47.50%), SN 500 (47.50%), and additives (5.00%) that gave the mixture with the optimum physicochemical parameters of the produced biolubricant. The produced LSSO biolubricant had kinematic viscosities 9.59±0.02 cSt (at 100°C) and 49.62±0.14 cSt (at 40°C), a viscosity index of 181±0.01, flash point of 230±1.20°C, pour point of -30±0.03°C, acid value of 2.72±1.03 mg KOH g-1, and iodine value of 1.28±1.40 mg I2 g-1. The LSSO biolubricant has physicochemical parameters that are within the standard for engine oils and could compete favourably with the synthesised environmentally acceptable lubricating oils.

Published in American Journal of Applied and Industrial Chemistry (Volume 2, Issue 1)
DOI 10.11648/j.ajaic.20180201.11
Page(s) 1-7
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Production, Environment, Biolubricant, Lagenaria Siceraria, Viscosity

References
[1] Rafaat, A. A. (2010). Different Techniques for the Production of Biodiesel from Waste Vegetable Oil. International Journal of Environmental Science & Technology, 7:183-213.
[2] Yang, C. Y., Li, Z. F. B. and Long, Y. F. (2012). Review and Prospects of Jatropha Biodiesel Industry in China. Renewable and Sustainable Energy Review, 16:2178-2190.
[3] Bilal, S., Mohammed-Dabo, I. A., Nuhu, M., Kasim, S. A., Almustapha, I. H. and Yamusa Y. A. (2013). Production of biolubricant from jatropha curcas seed oil. Journal of Chemical Engineering and Materials Science, 4:72-79.
[4] Weimin, L. and Xiaobo, W. (2015). Bio-lubricants Derived from Waste Cooking Oil with Improved Oxidation Stability and Low-temperature Properties. Journal of Oleo Science, 64:367-374.
[5] Muhammad, C., Usman, Z. and Agada, F. (2018). Biodiesel Production from Ceiba pentandra Seed Oil Using CaO Derived from Snail Shell as Catalyst. Petroleum Science and Engineering, 2:7-16.
[6] Jagadeesh, K. M., Satish, V. K., Venkatesh, K. and Kathyayini, N. (2018). Evironmentally Friendly Functional Fluids from Renewable and Sustainable Sources – A Review. Renewable and Sustainable Energy Reviews, 18:1787-1801.
[7] Dabai, M. U., Owuna, F. J., Sokoto, M. A. and Abubakar, A. L. (2018). Assessment of Quality Parameters of Ecofriendly Biolubricant from Waste Cooking Palm Oil. Asian Journal of Applied Chemistry Research, 1:1-11.
[8] Abadi, B. and Shimels, A. (2017). A Review on Potential and Status of Biofuel Production in Ethiopia. Journal of Plant Sciences, 5:82-89.
[9] Adolf, O., Akwasi, A., Gyang, N. O., Amoa, C. A. and Akorfa, A. A. (2018). Comparative Assessment of some Physico-chemical Properties of Seed Oils of Parkia biglobosa and Monodora myristica with some Commercial Oils. African Journal of Food Science, 12:1-5.
[10] Olaofe, O., Ogungbele, H. N., Akhadelor, B. E., Idris, O. V., Omotehinse, O. Y. and Ogunbodele, O. A. (2012). Physicochemical and Fatty Acids Composition of Oils from some Legume Seeds. International Journal of Biological, Pharmacy and Allied Science, 1:355-363.
[11] Sani, N. A., Hassan, L. G., Dangoggo, S. M., Ladan, M. J., Ali-baba, I. and Umar, K. J. (2013). Effect of Fermentation on Nutritional and Antinutritional Composition of Lageraria siceraria Seeds. Journal of Applied Chemistry, 5:01-06.
[12] Mukhtar, M., Muhammad, C., Dabai, M. U. and Muhammad, M. (2014). Ethanolysis of Calabash (Langeneria sinceraria) Seed Oil for the Production of Biodiesel. American Journal of Energy Engineering, 2:141-145.
[13] Ibrahim, H., Agwara, J. N., Tukur, Y., Nwanya, K. O., Nwakuba, D. C., Ayilara, S., Adegbola, O. B., Zanna, A. S. and Aliyu, U. A. (2016). Production of Biodiesel from Calabash Seed Oil. American Chemical Science Journal, 14:1-8.
[14] Jeevan, T. P. and Jayaram, S. R. (2018b). Experimental Investigation on the Performance of Vegetable Oil Based Cutting Fluids in Drilling AISI 304L Using Taguchi Technique. Tribology Online, 13:50-56.
[15] Obasi, A. U., Udeagbara, S. G. and Anusiobi, O. J. (2014). Effect of Additives on the Performance of Engine Oil. International Journal of Engineering and Technology Research, 2:1-11.
[16] Ahmed, D. I., Kasolang, S., Dwyer-Joyce, R. S., Sainan, K. I., and NikRoselina, N. R. (2014). Formulation and Physico-chemical Characteristics of Biolubricant. Jurnal Tribologi, 3: 1-10.
[17] Janes, A. and Chaineaux, J. (2013). Experimental Determination of Flash Points of Flammable Liquid Aqueous Solutions. Cemical Engineering Transactions, 31:943-948.
[18] Ainaatul, A., and Jumat, S. (2013). Synthesis of Rubber Seed Oil and Trimethylolpropane Based Biolubricant Base Stocks. Malaysian Journal of Analytical Sciences, 17:414-421.
[19] Danjuma, M. N. and Dandago, M. A. (2009). Extraction and Characterization of Calabash (Langeneria siceratia) Seed Oil. Techno Science Africana Journal, 3:67-69.
[20] Aliyu, A. W., Richard, U. U. and Ibrahim G. W. (2016). Physico-chemical and GC-MS Analysis of Calabash (Lagenaria siceraria) Seed Oil . International Journal of Biochemistry Research & Review, 14: 1-7.
[21] Jeevan, T. P. and Jayaram, S. R. (2018a). Performance Evaluation of Jatropha and Pongamia Oil Based Environmentally Friendly Cutting Fluids for Turning AA 6061. Advances in Tribology, 2018:1-9.
[22] Omahu, O. J. and Omale, A. C. (2017). Physicochemical Properties and Fatty Acid Composition of Castor Bean Ricinus communis L. Seed Oil. American Journal of Applied and Industrial Chemistry, 3:1-4.
[23] Christensen, E., Gina M. F., Seonah, K., Lisa, F., Erica, G., Robert, S. P. and Robert, L. M. (2017). Experimental and Theoretical Study of Oxidative Stability of Alkylated Furans used as Gasoline Blend Components. Fuel, 212:576-585.
[24] Ogunbusola, E. M., Fagbemi, T. N. and Osundahunsi, O. I. (2017). Fatty Acid Characterisation, Sterol Composition and Spectroscopic Analysis of Selected Cucurbitaceae Seed Oils. International Food Research Journal, 24:696-702.
[25] Dhia, F. A. and Sawsan, A. A. (2016). Fatty Acids Composition by GC-MS and Most Important Physical Chemicals Parameters of Seed Oil Pomogranate and Grape Seeds. Journal of Biology, Agriculture and Healthcare, 6:25-32.
[26] Aloko, S., Azubuike, C. P. and Hebert, A. B. C. (2017). Physicochemical Properties and Lubricant Potentials of Blighia Sapida Seed Oil in Solid Dosage Formulations. Tropical Journal of Pharmaceutical Research, 16:305-311.
[27] Gobinda, K., Pranab, G. and Bragendra, K. S. (2017). Chemically Modified Vegetable Oils to Prepare Green Lubricants. Lubricants, 44:1-7.
Cite This Article
  • APA Style

    Owuna Friday Junior, Dabai Musa Usman, Sokoto Muhammad Abdullahi, Muhammad Chika, Abubakar Aminu Lailaba. (2018). Use of Lagenaria Siceraria Seed Oil for the Production of Environmentally Friendly Biolubricant. American Journal of Applied and Industrial Chemistry, 2(1), 1-7. https://doi.org/10.11648/j.ajaic.20180201.11

    Copy | Download

    ACS Style

    Owuna Friday Junior; Dabai Musa Usman; Sokoto Muhammad Abdullahi; Muhammad Chika; Abubakar Aminu Lailaba. Use of Lagenaria Siceraria Seed Oil for the Production of Environmentally Friendly Biolubricant. Am. J. Appl. Ind. Chem. 2018, 2(1), 1-7. doi: 10.11648/j.ajaic.20180201.11

    Copy | Download

    AMA Style

    Owuna Friday Junior, Dabai Musa Usman, Sokoto Muhammad Abdullahi, Muhammad Chika, Abubakar Aminu Lailaba. Use of Lagenaria Siceraria Seed Oil for the Production of Environmentally Friendly Biolubricant. Am J Appl Ind Chem. 2018;2(1):1-7. doi: 10.11648/j.ajaic.20180201.11

    Copy | Download

  • @article{10.11648/j.ajaic.20180201.11,
      author = {Owuna Friday Junior and Dabai Musa Usman and Sokoto Muhammad Abdullahi and Muhammad Chika and Abubakar Aminu Lailaba},
      title = {Use of Lagenaria Siceraria Seed Oil for the Production of Environmentally Friendly Biolubricant},
      journal = {American Journal of Applied and Industrial Chemistry},
      volume = {2},
      number = {1},
      pages = {1-7},
      doi = {10.11648/j.ajaic.20180201.11},
      url = {https://doi.org/10.11648/j.ajaic.20180201.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajaic.20180201.11},
      abstract = {The needs for environmentally friendly energy sources, coupled with the depleted fossil oil reserves, have generated interests in the search for world’s alternative energy sources, and vegetable oils seem to be the best options. This study assesses the use of Lagenaria siceraria seed oil (LSSO) as a potential source of environmentally friendly biolubricant. The LSSO was extracted from the Lagenaria siceraria seed (LSS) using Soxhlet apparatus, and a yield of 41.70% was obtained, with n-hexane as the extracting solvent. The physicochemical parameters of LSSO were assayed to confirm its potential for the production of environmentally friendly biolubricant. The result showed that the kinematic viscosities of 6.24±0.10cSt (at 100°C) and 21.74±0.02 cSt (at 40°C) were obtained, while the viscosity index (266±0.00) was also obtained. An experiment was designed (Mixture Design Method using Minitab 17) to obtain the proportion of LSSO (47.50%), SN 500 (47.50%), and additives (5.00%) that gave the mixture with the optimum physicochemical parameters of the produced biolubricant. The produced LSSO biolubricant had kinematic viscosities 9.59±0.02 cSt (at 100°C) and 49.62±0.14 cSt (at 40°C), a viscosity index of 181±0.01, flash point of 230±1.20°C, pour point of -30±0.03°C, acid value of 2.72±1.03 mg KOH g-1, and iodine value of 1.28±1.40 mg I2 g-1. The LSSO biolubricant has physicochemical parameters that are within the standard for engine oils and could compete favourably with the synthesised environmentally acceptable lubricating oils.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Use of Lagenaria Siceraria Seed Oil for the Production of Environmentally Friendly Biolubricant
    AU  - Owuna Friday Junior
    AU  - Dabai Musa Usman
    AU  - Sokoto Muhammad Abdullahi
    AU  - Muhammad Chika
    AU  - Abubakar Aminu Lailaba
    Y1  - 2018/10/12
    PY  - 2018
    N1  - https://doi.org/10.11648/j.ajaic.20180201.11
    DO  - 10.11648/j.ajaic.20180201.11
    T2  - American Journal of Applied and Industrial Chemistry
    JF  - American Journal of Applied and Industrial Chemistry
    JO  - American Journal of Applied and Industrial Chemistry
    SP  - 1
    EP  - 7
    PB  - Science Publishing Group
    SN  - 2994-7294
    UR  - https://doi.org/10.11648/j.ajaic.20180201.11
    AB  - The needs for environmentally friendly energy sources, coupled with the depleted fossil oil reserves, have generated interests in the search for world’s alternative energy sources, and vegetable oils seem to be the best options. This study assesses the use of Lagenaria siceraria seed oil (LSSO) as a potential source of environmentally friendly biolubricant. The LSSO was extracted from the Lagenaria siceraria seed (LSS) using Soxhlet apparatus, and a yield of 41.70% was obtained, with n-hexane as the extracting solvent. The physicochemical parameters of LSSO were assayed to confirm its potential for the production of environmentally friendly biolubricant. The result showed that the kinematic viscosities of 6.24±0.10cSt (at 100°C) and 21.74±0.02 cSt (at 40°C) were obtained, while the viscosity index (266±0.00) was also obtained. An experiment was designed (Mixture Design Method using Minitab 17) to obtain the proportion of LSSO (47.50%), SN 500 (47.50%), and additives (5.00%) that gave the mixture with the optimum physicochemical parameters of the produced biolubricant. The produced LSSO biolubricant had kinematic viscosities 9.59±0.02 cSt (at 100°C) and 49.62±0.14 cSt (at 40°C), a viscosity index of 181±0.01, flash point of 230±1.20°C, pour point of -30±0.03°C, acid value of 2.72±1.03 mg KOH g-1, and iodine value of 1.28±1.40 mg I2 g-1. The LSSO biolubricant has physicochemical parameters that are within the standard for engine oils and could compete favourably with the synthesised environmentally acceptable lubricating oils.
    VL  - 2
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Pure and Applied Chemistry, Faculty of Science, Usmanu Danfodiyo University, Sokoto, Nigeria

  • Department of Pure and Applied Chemistry, Faculty of Science, Usmanu Danfodiyo University, Sokoto, Nigeria

  • Department of Pure and Applied Chemistry, Faculty of Science, Usmanu Danfodiyo University, Sokoto, Nigeria

  • Department of Pure and Applied Chemistry, Faculty of Science, Usmanu Danfodiyo University, Sokoto, Nigeria

  • Department of Biochemistry, Faculty of Science, Usmanu Danfodiyo University, Sokoto, Nigeria

  • Sections