A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction

Dickson Kinyua Kande

doi:doi:10.11648/j.mma.20170202.11

| Peer-Reviewed

A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction

Dickson Kinyua Kande

Published in Mathematical Modelling and Applications (Volume 2, Issue 2)

Received: 8 September 2016 Accepted: 14 April 2017 Published: 18 April 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Greenhouses are mainly used with a purpose of improving the environmental conditions in which plants are grown. The parameters that affect the growth of plants inside greenhouse, such as air temperature and relative humidity are controlled appropriately. They are done so efficiently to retain relatively low levels of solar energy; but without specialized ventilating and cooling systems, they will quickly fry a crop during high temperature periods. Over the past few decades CFD has been a useful tool in development of numerical models that improve the understanding of the interaction of the gases and vapors constituting micro-climate inside greenhouses. It is however, necessary to perform a CFD analysis to show us the trends, strengths and weaknesses in the use of this tool. This paper discusses an introduction of CFD analysis of airflow and climate inside greenhouses, analyzing the issues that help us understand how it has evolved, as well as trends and limitations on their use.

Published in	Mathematical Modelling and Applications (Volume 2, Issue 2)
DOI	10.11648/j.mma.20170202.11
Page(s)	17-20
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

CFD, Convection, Greenhouse, Heat and Mass Transfer, Modeling

References

[1]	https://en.wikipedia.org/wiki/ Greenhouse
[2]	https://en.wikipedia.org/wiki/Fluid_ dynamics
[3]	https://en.wikipedia.org/wiki/ Computational_fluid_dynamics
[4]	I. A. Hameed, “Using the Extended Kalman Filter to Improve the Efficiency of Greenhouse Climate Control”, International Journal of innovative Computing, information and control, Vol. 6, Number 7, pp. 1–10, July 2010.
[5]	F. Hosney, H. Mohamed F., N. Mohamed A., and A. A. Nafeh, “Modeling and Simulation of Evaporative Cooling System in Controlled Environment Greenhouse”, Smart Grid and Renewable Energy, Vol. 3, pp 67-71, February 2012.
[6]	G. D. Torre-Gea, G. M. Soto-Zarazúa, I. López-Crúz, I. Torres-Pacheco, and E. Rico-García, “Computational fluid dynamics in greenhouses: A review”, African Journal of Biotechnology, Vol. 10(77), pp. 17651-17662, December, 2011
[7]	N. Ashgriz, and J. Mostaghimi, An Introduction to Computational Fluid Dynamics, Department of Mechanical & Industrial Engineering, University of Toronto, Ontario.
[8]	R. K. Rajput, Heat and Mass Transfer in SI Units, S. Chand & Company Ltd, New Delhi, 2008.
[9]	T. Boulard, C. Kittas, J. C. Roy and S. Wang, “Convective and Ventilation Transfers in Greenhouses, Part 2: Determination of the Distributed Greenhouse Climate” Biosystems Engineering, Vol. 83 (2), pp. 129–147, 2002.
[10]	F. P. Incropera, D. P. Dewitt, T. L. Bergman And A. S. Lavine, Fundamentals of Heat and Mass Transfer, Sixth Edition, John Wiley & Sons, 2007.
[11]	D. Kuzmin, A Guide to Numerical Methods for Transport Equations, Friedrich-Alexander University, Bavaria, Germany, 2010.
[12]	H. Moore, MATLAB® for Engineers Third Edition, Salt Lake Community College, Boston, Pearson Education, Inc., 2012.
[13]	A. H. Register, A Guide to MATLAB® Object-Oriented Programming, Georgia Tech Research Institute, Atlanta, USA, SciTech Publishing Inc, 2007.

Cite This Article

Plain Text BibTeX RIS

APA Style

Dickson Kinyua Kande. (2017). A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction. Mathematical Modelling and Applications, 2(2), 17-20. https://doi.org/10.11648/j.mma.20170202.11

Copy | Download

ACS Style

Dickson Kinyua Kande. A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction. Math. Model. Appl. 2017, 2(2), 17-20. doi: 10.11648/j.mma.20170202.11

Copy | Download

AMA Style

Dickson Kinyua Kande. A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction. Math Model Appl. 2017;2(2):17-20. doi: 10.11648/j.mma.20170202.11

Copy | Download

@article{10.11648/j.mma.20170202.11,
  author = {Dickson Kinyua Kande},
  title = {A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction},
  journal = {Mathematical Modelling and Applications},
  volume = {2},
  number = {2},
  pages = {17-20},
  doi = {10.11648/j.mma.20170202.11},
  url = {https://doi.org/10.11648/j.mma.20170202.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.mma.20170202.11},
  abstract = {Greenhouses are mainly used with a purpose of improving the environmental conditions in which plants are grown. The parameters that affect the growth of plants inside greenhouse, such as air temperature and relative humidity are controlled appropriately. They are done so efficiently to retain relatively low levels of solar energy; but without specialized ventilating and cooling systems, they will quickly fry a crop during high temperature periods. Over the past few decades CFD has been a useful tool in development of numerical models that improve the understanding of the interaction of the gases and vapors constituting micro-climate inside greenhouses. It is however, necessary to perform a CFD analysis to show us the trends, strengths and weaknesses in the use of this tool. This paper discusses an introduction of CFD analysis of airflow and climate inside greenhouses, analyzing the issues that help us understand how it has evolved, as well as trends and limitations on their use.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction
AU  - Dickson Kinyua Kande
Y1  - 2017/04/18
PY  - 2017
N1  - https://doi.org/10.11648/j.mma.20170202.11
DO  - 10.11648/j.mma.20170202.11
T2  - Mathematical Modelling and Applications
JF  - Mathematical Modelling and Applications
JO  - Mathematical Modelling and Applications
SP  - 17
EP  - 20
PB  - Science Publishing Group
SN  - 2575-1794
UR  - https://doi.org/10.11648/j.mma.20170202.11
AB  - Greenhouses are mainly used with a purpose of improving the environmental conditions in which plants are grown. The parameters that affect the growth of plants inside greenhouse, such as air temperature and relative humidity are controlled appropriately. They are done so efficiently to retain relatively low levels of solar energy; but without specialized ventilating and cooling systems, they will quickly fry a crop during high temperature periods. Over the past few decades CFD has been a useful tool in development of numerical models that improve the understanding of the interaction of the gases and vapors constituting micro-climate inside greenhouses. It is however, necessary to perform a CFD analysis to show us the trends, strengths and weaknesses in the use of this tool. This paper discusses an introduction of CFD analysis of airflow and climate inside greenhouses, analyzing the issues that help us understand how it has evolved, as well as trends and limitations on their use.
VL  - 2
IS  - 2
ER  -

Copy | Download

Author Information

Dickson Kinyua Kande

Department of Mathematics, Moi University, Eldoret, Kenya

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Dickson Kinyua Kande. (2017). A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction. Mathematical Modelling and Applications, 2(2), 17-20. https://doi.org/10.11648/j.mma.20170202.11

Copy | Download

ACS Style

Dickson Kinyua Kande. A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction. Math. Model. Appl. 2017, 2(2), 17-20. doi: 10.11648/j.mma.20170202.11

Copy | Download

AMA Style

Dickson Kinyua Kande. A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction. Math Model Appl. 2017;2(2):17-20. doi: 10.11648/j.mma.20170202.11

Copy | Download

@article{10.11648/j.mma.20170202.11,
  author = {Dickson Kinyua Kande},
  title = {A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction},
  journal = {Mathematical Modelling and Applications},
  volume = {2},
  number = {2},
  pages = {17-20},
  doi = {10.11648/j.mma.20170202.11},
  url = {https://doi.org/10.11648/j.mma.20170202.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.mma.20170202.11},
  abstract = {Greenhouses are mainly used with a purpose of improving the environmental conditions in which plants are grown. The parameters that affect the growth of plants inside greenhouse, such as air temperature and relative humidity are controlled appropriately. They are done so efficiently to retain relatively low levels of solar energy; but without specialized ventilating and cooling systems, they will quickly fry a crop during high temperature periods. Over the past few decades CFD has been a useful tool in development of numerical models that improve the understanding of the interaction of the gases and vapors constituting micro-climate inside greenhouses. It is however, necessary to perform a CFD analysis to show us the trends, strengths and weaknesses in the use of this tool. This paper discusses an introduction of CFD analysis of airflow and climate inside greenhouses, analyzing the issues that help us understand how it has evolved, as well as trends and limitations on their use.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - A CFD Analysis of Heat and Mass Transfer in greenhouses: An Introduction
AU  - Dickson Kinyua Kande
Y1  - 2017/04/18
PY  - 2017
N1  - https://doi.org/10.11648/j.mma.20170202.11
DO  - 10.11648/j.mma.20170202.11
T2  - Mathematical Modelling and Applications
JF  - Mathematical Modelling and Applications
JO  - Mathematical Modelling and Applications
SP  - 17
EP  - 20
PB  - Science Publishing Group
SN  - 2575-1794
UR  - https://doi.org/10.11648/j.mma.20170202.11
AB  - Greenhouses are mainly used with a purpose of improving the environmental conditions in which plants are grown. The parameters that affect the growth of plants inside greenhouse, such as air temperature and relative humidity are controlled appropriately. They are done so efficiently to retain relatively low levels of solar energy; but without specialized ventilating and cooling systems, they will quickly fry a crop during high temperature periods. Over the past few decades CFD has been a useful tool in development of numerical models that improve the understanding of the interaction of the gases and vapors constituting micro-climate inside greenhouses. It is however, necessary to perform a CFD analysis to show us the trends, strengths and weaknesses in the use of this tool. This paper discusses an introduction of CFD analysis of airflow and climate inside greenhouses, analyzing the issues that help us understand how it has evolved, as well as trends and limitations on their use.
VL  - 2
IS  - 2
ER  -

Copy | Download