The Reliability of Data from Metrology 4.0
International Journal on Data Science and Technology
Volume 6, Issue 4, December 2020, Pages: 66-69
Received: Mar. 18, 2020;
Accepted: Apr. 2, 2020;
Published: Dec. 31, 2020
Views 31 Downloads 12
Kathleen Cunha, Department of Mechanical Engineering, Faculty of Engineering, University of Roseira, Roseira - Sp, Brazil
Ramon Santos, Department of Mechanical Engineering, Faculty of Engineering, Salesian University of São Paulo, Lorena - Sp, Brazil
Follow on us
The evolution of the human being is constant, we are always in search of new technologies, methods and techniques in order to provide several improvements such as, cost reduction, increase in quality, reduction in the use of natural resources, improvement of the workforce, agility of consequently provide improvements in quality of life. With the advancement of technology we came to the so-called "Fourth Industrial Revolution" which aims to generate and obtain data in real time, with the aim of optimizing decision making, increasing quality, mass customization, cost reduction and traceability. In view of this new industrial scenario, some methods will undergo significant changes, such as the field of science and action for measurement, called Metrology, whose purpose of this article is to exemplify metrology 4.0, calibration procedure with the help of IoT, calibration certificates in metrology 4.0, reliability, guarantee and security of the generated data. In view of fact that the area of Metrology has always been highlighted by major innovations in its working methods, using instruments of highly accurate measurements, these instruments in most cases can be mechanical or electronic equipment, but they need to be correctly calibrated to perform the function that has been proposed with excellence. Thus highlights the importance for the industrial scenario today, where concepts of IoT, machine learning, data science, artificial intelligence and industrial automation are tools that all engineering professional should obtain thorough knowledge. Mainly professionals in the area of metrology, which can use these concepts and tools to ensure the standard and reliability of the calibration of the measuring instruments.
New Technology, Data Generation, Metrology 4.0, Calibration, Reliability
To cite this article
The Reliability of Data from Metrology 4.0, International Journal on Data Science and Technology.
Vol. 6, No. 4,
2020, pp. 66-69.
Copyright © 2020 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
KAGERMANN et al. (2011) “Industrie 4.0: Mit dem Internert der Dinge auf dem Weg zur 4”. Industriellen Revolution. VDI nachrichten, vol. 13, no. 1, pp 228-243.
RANDI, W. H.; BALDO, R. G. (2019). Analysis of the Techniques and Technologies for Indoor Location. Sodebras Magazine, v. 14, n. 165, p. 50-56. DOI: dx.doi.org/10.29367/issn.1809-3957.14.2019.165.50.
KAGERMANN et al. (2013) ‘Recommendations for implementing the strategic initiative Industrie 4.0: Final report of the industrie 4.0’. Working Group, Acatech – National Academy of Science and Engineering.
SOUZA, R. S. L. (2020) ‘Metrology 4.0 Division Metrology in Information Technology and Telecommunications’. INMETRO.
ALBERTAZZI, G. Jr., SOUZA, A. R., (2018) ‘Fundamentals of Scientific and Industrial Metrology’, edition 2.
ALMEIDA, P. S. (2019) ‘Industry 4.0 - Basic Principles, Applicability and Implementation in the Industrial Area’. São Paulo, 2019.
METROLOGY 4.0 A NEW MEASURE, Control and Instrumentation, 21, n° 240, 2018.
SANTOS, R. O. B.; MUNIZ, W. F. Computational Tool That Performs Calculations of Linear Systems Theorem Cramer. Exact Sciences Journal, (2018). Vol. 24, no. 2, p. 29-38. Available in: .
CUNHA, K. C. S, et al. (2019) ‘Logistics for the Calibration of a Meteorological Station’, 10 th Brazilian Metrology Congress, 2019, Florianópolis - SC. Metrology.
INMETRO. (2012) ‘Quality and Technology / Instituto Português da Qualidade. International Metrology Vocabulary: fundamental and general concepts and associated terms (VIM 2012)’ - JCGM 200: 2012. 1st Luso-Brazilian Edition. Rio de Janeiro.
CAMPOS, A. F.; WETLER, J. P.; FERNANDES, S. M. (2019). Green Economy In The Steel Industry: An Application (IM) Possible?. Sodebras Magazine, v. 14, n.162, p.04-10.DOI: doi.org/10.29367/issn.1809-3957.14.2019.162.4.
SANTOS, R. O. B. D., HONORATO, L. F. F., SAMPAIO, H. C., & PRADO, P. H. C. (2020). TECHNICAL PROPOSAL FOR ADAPTING CONVENTIONAL MILLING MACHINE TO BRAZILIAN REGULATORY STANDARD NR12. Anais Do Brazilian Congress of Development 2020. doi:10.51162/brc.dev2020-00064.