Application of Stimstream Shaped Charge with Consistent Entrance Hole and Deep Penetration in Shale Gas Reservoir
American Journal of Applied Scientific Research
Volume 5, Issue 1, March 2019, Pages: 21-27
Received: Feb. 1, 2019;
Accepted: Apr. 1, 2019;
Published: Apr. 22, 2019
Views 218 Downloads 14
Wang Changshuan, North Schlumberger Oilfield Technology (Xian) Co., Ltd., Xi’an, China
Guo Hongzhi, Schlumberger China S. A., Beijing, China
Jiao Guandong, North Schlumberger Oilfield Technology (Xian) Co., Ltd., Xi’an, China
Niu Yuanyuan, North Schlumberger Oilfield Technology (Xian) Co., Ltd., Xi’an, China
Xie Mingzhao, North Schlumberger Oilfield Technology (Xian) Co., Ltd., Xi’an, China
To address the issues of inefficient hydraulic fracturing on perforation clusters in shale gas horizontal wells caused by the inconsistent size of entrance holes on the casing, Stimstream shaped charge providing consistent hole and deep-penetration was introduced and its special performance was analyzed. Surface concrete target test and field test were conducted respectively to compare the performance between this kind of charge and conventional deep penetration charges made in China. In surface concrete target test, the average hole diameter of Stimstream shaped charge in 0°, 90°, 180°, 270° phasing is 9.4mm, 9.3mm, 9.3mm, 8.9mm, the average hole diameter of conventional deep penetration charges in 0°, 90°, 180°, 270° phasing is 9.3mm, 8.6mm, 6.5mm, 7.0mm respectively. The results shown that Stimstream shaped charge can provide uniform and big holes on the casing regardless of different clearance between perforating gun and casing. In three field testings, comparing the field data of S3406D Stimstream charge and domestic SDP35HMX25 shaped charges, it proven that S3406D can reduce the average hydraulic breakdown pressure by 2044.5 psi, 1189psi and 1261.5psi respectively, and reduce the average treatment pressure to pump proppant by 696psi, 652.5psi and 928psi respectively. It has remarkable effectiveness on reducing the breakdown pressure and treatment pressure of shale gas formations during hydraulic fracturing operation.
Application of Stimstream Shaped Charge with Consistent Entrance Hole and Deep Penetration in Shale Gas Reservoir, American Journal of Applied Scientific Research.
Vol. 5, No. 1,
2019, pp. 21-27.
MA C Q. Shale Gas Wells Fracturing Technology and Its Effect Evaluation [J]. Petrochemical Industry and Application, 2011, 30(5): 1-3.
Cipolla, C., Weng, X., Onda, H., Nadaraja, T., Ganpuly, U. and Malpani, R. 2011. New Algorithms and Integrated Workflow for Tight Gas and Shale Completions. Paper SPE 146872 presented at the SPE Annual Technical Conference and Exhibition, Denver, Colorado, USA, 30 October – 2 November 2011.
Walker, K., Wutherich, K., Terry, J., Shreves, J. and Caplan, J. 2012. Improving Production in the Marcellus Shale Using an Engineered Completion Design: A Case Study. Paper SPE 159666 presented at the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, USA, 8 – 10 October 2012.
Slocombe, R., Acock, A., Chadwick, C., Wigger, E., Viswanathan, A., Fisher, K. and Reischman, R. 2013. Eagle Ford Completion Optimization Strategies Using Horizontal Logging Data. Paper URTeC 1571745 presented at the Unconventional Resources Technology Conference, Denver, Colorado, USA, 12 – 14 August 2013.
George Waters and Xiaowei Weng. The Impact of Geomechanics and Perforations on Hydraulic Fracture Initiation and Complexity in Horizontal Well Completions. SPE 181684. Presented at the SPE Annual Technical Conference and Exhibition held in Dubai, UAE, 26-28 September 2016.
Wu Qi, Liang Xing, Xian Chenggang et al. 2015. Geoscience-to-Production Integration Ensures Effective and Efficient South China Marine Shale Gas Development. China Petroleum Exploration 20 (4): 1–23.
Wu Kun-yu, Zhang Ting-shan, Yang Yang et al. 2016. Geological Characteristics of Wufeng-Longmaxi shale-gas reservoir in the Huangjingba Gas Field, Zhaotong National Shale Gas Demonstration Area. Geology in China 43 (1): 275 – 287.
Liang Xin, Wang Gaocheng, Xu Zhengyu, et al, Comprehensive evaluation technology for shale gas sweet sports in the complex marine mountains, South China: A case study from Zhaotong national shale gas demonstration zone [J], NATRUAL GAS INDUSTRY, 2016 36 (1) : 33 – 42.
Liang Xing, Wang Lizhi, Zhang Jiehui et al. 2015. An Integrated Approach to Ensure Horizontal Wells 100% in the Right Positions of the Sweet Section to Achieve Optimal Stimulation: A Shale Gas Field Study in the Sichuan Basin, China. SPE-177474. Presented at the Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi, UAE, 9–12 November 2015.
Wang Weixu, Xian Chenggang, Liang Xing, et al. 2017. Production Controlling Factors of the Longmaxi Shale Gas Formation – A Case Study of Huangjingba Shale Gas Field. SPE186874. Presented at the SPE/IATMI Asia Pacific Oil & Gas Conference and Exhibition held in Jakarta, Indonesia, 17-19 October 2017.
Miller, C., Waters, G. and Rylander, E. 2011. Evaluation of Production Log Data from Horizontal Wells Drill in Organic Shales. Paper SPE 144326 presented at the SPE North American Unconventional Gas Conference & Exhibition, The Woodlands, Texas, USA, 12 – 16 June 2011.
JIANG M Z, CAO Y P, YE P et al. Study on Pressure Loss of Fracturing Fluid at Bullet Hole [J]. Oil Field Equipment, 2011, 40 (3): 1-4.
Behrmann, L. A. and Elbel, J. L. 1991. Effect of Perforations on Fracture Initiation. JPT (May, 1991) pp 608 – 615.
Behrmann, L. A. and Nolte, K. G. 1998. Perforating Requirements for Fracture Stimulations. Paper SPE 39453 presented at the SPE International Symposium on Formation Damage Control, Lafayette, Louisiana, USA, 18 – 19 February 1998.
C. Gresbeck , R. E. Collins. Particle Transport Through Perforations. Society of Petroleum Engineers Journal, December 1982 : 857-865
CUI S H, BAN F S, YUAN G J. Shale Gas Drilling and Completion Technology Present Situation and Difficulty Analysis [J]. NATURAL GAS INDUSTRY. 2011, 31 (4): 72-75.
WANG S L, DONG K X, DONG H Y. Effect analysis of perforating parameters upon initiation pressure in low permeability reservoir [J]. Oil Drilling and Production Technology, 2009, 31(3): 85-89.
Eight Department of Beijing Industrial Institute, Explosion and its role (Volume two) [M] . BeiJing: National Defense Industry Press, 1979: 95-110.
GAO Y H, GU X H, WANG F Y. Powder liner density effect on the performance of shaped charge jet [J]. Chinese Journal of High Pressure Physics, 2013, 27(4): 556-560.