Development of a Carbon Fibre Reinforced Polymer for Exhaust Pipe of Two Stroke Engine
American Journal of Mechanical and Materials Engineering
Volume 1, Issue 2, June 2017, Pages: 31-43
Received: Mar. 13, 2017;
Accepted: Apr. 14, 2017;
Published: Jun. 2, 2017
Views 1711 Downloads 131
Asha Saturday, Mechanical & Process Design Unit, Manufacturing Services Department, National Engineering Design Development Institute (NEDDI), Nnewi, Anambra, Nigeria
Ogah Anthony Olukayode, Mechanical & Process Design Unit, Manufacturing Services Department, National Engineering Design Development Institute (NEDDI), Nnewi, Anambra, Nigeria
Emmanuel Saturday Odomagah, Mechanical & Process Design Unit, Manufacturing Services Department, National Engineering Design Development Institute (NEDDI), Nnewi, Anambra, Nigeria
Okorun Ambrose Ali, Mechanical & Process Design Unit, Manufacturing Services Department, National Engineering Design Development Institute (NEDDI), Nnewi, Anambra, Nigeria
Okocha Godstime Obiajulu, Science Laboratory Technology Department, Federal Polytechnic Auchi, Auchi, Edo, Nigeria
Engine noise production performance is strongly dependent on gas dynamic phenomena and hardness of the material of the exhaust systems. Careful design of the manifolds enables the engineer to manipulate these characteristics but none has treated a way to damp these vibration and its frequencies. Solidworks 2014 and Ansys workbench 4.0 are used to investigate thermal and modal analysis on a heat resistant 40% carbon glass fibre reinforced polyester resin. The steady state analysis in fig. (3), shows a temperature distribution of 193.1°C, total heat flux of 30737(W⁄m2) and a direction heat flux 18565(W⁄m2). Considering the transient heat analysis a temperature distribution 139.59°C, total heat flux of 170370(W⁄m2) and a direction heat flux 108810(W⁄m2). The modal analysis reveals a displacement of 1.4939m at 6.7011Hz in x-axis direction depicting the direction of the exhaust gas emission.
Ogah Anthony Olukayode,
Emmanuel Saturday Odomagah,
Okorun Ambrose Ali,
Okocha Godstime Obiajulu,
Development of a Carbon Fibre Reinforced Polymer for Exhaust Pipe of Two Stroke Engine, American Journal of Mechanical and Materials Engineering.
Vol. 1, No. 2,
2017, pp. 31-43.
Faluyi, S. O., S. O. Awoku and S. O. Adebayo, (2006). Comparison of the headway distribution of automobile vehicles and motorcycles plying major roads in Ado-Ekiti, Nigeria. J. Applied Sci., 9(1): 6274-6285.
Vorsic, A. M. and M. Weilenmann, (2006). Comparison of real-world emissions from two-wheelers and passenger cars. J. Environ. Sci. Technol., 40(1):149-157.
Houston, R. and S. Ahern, (2007). A fresh approach to the design of clean engines for the performance motorcycle market, SAE Technical Paper No. 2007-32-0001.
Kenneth. O. Enebe, Ejehson Philip Sule, Asha Saturday, Ogbomida Zemoya Ogbemudia, Onuoha Evaristus Iroeme (2016), Assessment of Effect of Back Pressure and Gas Flow Dynamics of Exhaust Pipe of a Two-Stroke Engine on Its Performance Characteristics. Journal of Emerging Technologies and Innovative Research (JETIR) www.jetir.org JETIR (ISSN-2349-5162) April 2016, Volume 3, Issue 4.
Lyon, R. E., In International SAMPE Symposium and Exhibition( Proceedings), 1996, 41(I), p. 344.
Landrock, A. H., Handbook of Plastics Flammability and Combustion Toxicology, Noyes publication, Park Ridge, New Jersey, 1983.
Cullis, C. F. and Hirschler, M., The Combustion of Organic Polymers, Clarendon Press, Oxford, 1981.
Lyon, R. E., In International SAMPE Symposium and Exhibition (Proceedings), 1997, 42(II), pp. 1325-1334.
Glassman, I., Combustion, 3rd ed., Academic Press, New York, 1996.
Nelson, G. L., In Fire and Polymers II: Materials and Tests for Hazard Prevention, Nelson, G. L., ed., American Chemical Society, Washington, D.C., 1995, Vol. 599, pp. 1-26.
Hartzell, G. E., In Fire Protection Handbook, 18th ed., Cote, A. E., ed., National Fire Protection Association, Quincy, MA, 1997, Vol. Chapter 2.
“FAA Fire Test Handbook,” FAA report, DOT/FAA/CT-89/15, Washington, DC, September 1990.
Scudamore, M. J., Briggs, P. J., and Prager, F. H., Fire Mater., 1991, 15, pp. 65-84.
Frazer, A. H., High Temperature Resistant Polymers, John Wiley & Sons, New York, 1968.
Lin, S.-H., Li, F., Cheng, S. Z. D., and Harris, F. W., Macromolecules, 1998, 31, pp. 2080-2086.
www.lubrizol.com/engineeredpolymers., Lubrizol Advanced Materials, Inc. / 9911 Brecksville Road, Cleveland, Ohio 44141-3247 / 216.447.5000.
B. Lévesque, ‘Measurement of exhaust pipe sound pressure levels of stationary scooters, mopeds or motorcycles with automatic transmissions with no neutral’. Department of Mechanical Engineering, Université Laval.
Noise Induced Hearing Loss. Hearing Loss Web. [Online] 2016. [Cited: september 18, 2016.] http://www.hearinglossweb.com/Medical/Causes/nihl/nihl.htm.