Reviewing the Development of Natural Fiber Polymer Composite: A Case Study of Sisal and Jute
American Journal of Mechanical and Materials Engineering
Volume 3, Issue 1, March 2019, Pages: 1-10
Received: Dec. 7, 2018; Accepted: Jan. 11, 2019; Published: Feb. 22, 2019
Views 101      Downloads 43
Authors
Gbenga Ekundayo, Mechanical Eng’g Department, Rufus Giwa Polytechnic, Owo, Nigeria
Sam Adejuyigbe, Mechatronics Eng’g Department, Federal University, Oye Ekiti, Nigeria
Article Tools
Follow on us
Abstract
Natural fibers that are mainly from plants, animals and regenerated sources are degradable and environmentally friendly as they absorb carbon dioxide and release oxygen, they are cost effective when compare to the synthetic fibers. These materials mainly from plant are used initially for domestics’ purposes. They have recently been introduced to some industries, such as automotive, aircraft, marine and buildings, arising from their excellent mechanical, physical and chemical properties. The common natural fibers used for Natural Fiber Reinforced Polymer Composites (NFRPC) are, cotton, sisal, coir, jute, hemp, flax, banana, bamboo etc. Several researches and publications on natural fibers and its composite show that despite the properties of these fibers, their applications were limited to non-structural applications either for interior or exterior applications just for their environmental and low-cost benefit with less concern for their strength capabilities. Sisal and jute are fibers from vegetable and bast plants that had been proved to have exhibited excellent tensile and flexural properties (bast composite) and best impact properties (vegetable composite), were also restricted to non-structural applications only. This paper reviewed the present status and future expectations of natural fiber reinforced composites in structural applications using sisal and jute fiber reinforced polymer composites as a case.
Keywords
Natural Composites, Natural Fibers, Matrices, Sisal and Jute Fibers, Structural Applications
To cite this article
Gbenga Ekundayo, Sam Adejuyigbe, Reviewing the Development of Natural Fiber Polymer Composite: A Case Study of Sisal and Jute, American Journal of Mechanical and Materials Engineering. Vol. 3, No. 1, 2019, pp. 1-10. doi: 10.11648/j.ajmme.20190301.11
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
References
[1]
ROWELL, R. M. & MCSWEENY, J. D. 2008. Heat treatments of wood fibers for self-bonding and stabilized fiberboards. Mol. Cryst. Liq. Cryst. 483: 307-325.
[2]
DANIEL, G., SUONG, V. H. & STEPHEN W. T. 2003. Composite materials: designs and manufacturing of composite. CRC Press LLC, Paris.
[3]
PRAKASH, T. 2009. Processing and characterization of natural fiber reinforced polymer composites. B. Tech. thesis, National Institute of Technology, Rourkela.
[4]
MOHINI, S., ASOKAN, P., ANUSHA S., RUHI, H. & SONAL, W. 2010. Composite materials from natural resources: Recent trends and future potentials. [Online] Available from: http://www.intechopen.com/books/advances-in-composite-materials-analysis-of-natural-and-man-made-materials/composite-materials-from-natural-resources-recent-trends-and-future-potentials [Accessed:12/03/2013].
[5]
BRYAN, H. 1999. Engineering composite materials. [Online] Available from: http://www.cantab.net/users/bryanharris/Engineering%20Composites.pdf [Accessed: 06/07/2012].
[6]
TICOALU, A., ARAVINTHAN, T. & CARDONA, F. 2010. A review of current development in natural fiber composites for structural and infrastructure applications. Southern region engineering conference. Toowoomba, Australia: 1-5.
[7]
TARA, S. & JAGANNATHA, H. N. R. 2011. Application of sisal, bamboo, coir and jute natural composite in structural upgradation. International journal of innovation, management and technology 2 (3): 186 – 191.
[8]
KURUVILLA, JOSEPH., ROMILDO, D. T. F., BEENA J., SABU T. & HECKER D. C., L. 1999. A review on sisal fiber reinforced polymer composites. Revista brasileira eugenharia Agricola e ambiental 3 (3): 367 -379.
[9]
FARUK, O., BLEDZKI, A. K., FINK, H. P. & SAIN M. 2012. Biocomposites reinforced with natural fibers: 2000 -2010. Progress in polymer science 37 (11): 1552 -1596.
[10]
KALIA, S., KAITH, B. S. & KAUR, I. 2009. Pretreatments of natural fibers and their applications as reinforcing materials in polymer composite – a review. Polymer Engineering and Science 49 (7): 1253 – 1272.
[11]
BEEPA B., LALY A. P., MAVEHIL –SAM, R. & SABU T. 2011. Structures, properties and recyclability of natural fiber reinforced polymer composites. Recent development in polymer recycling 101 – 120.
[12]
CHRISTOPHER C. I., CHRISTIAN E. O. & CHRIS I. O. 2013. Natural fiber composites design and characterization for limit stress prediction in multiaxial stress state. Journal of king Saudi University-engineering sciences 1-1.
[13]
ROGER, M. R., ANAND R. S., DANIEL, F. C. & RODNEY E. J. 1997. Utilization of natural fibers in plastic composites: problems and opportunities [Online] Available from: http://www.fpl.fs.fed.us/documnts/pdf1997/rowel97d.pdf [Accessed: 15/03/ 2013].
[14]
FAO, 2009. Future fibers [Online] Available from: http://www.fao.org/economic/futurefibres/en/ [Accessed: 15/03/2013].
[15]
XUN L., MING Q. Z., MIN Z. R., DA L. Y. & GUI C. Y. 2003.The preparation of self-reinforced sisal fiber composite. Polymer and polymer composites 12 (4): 297- 308.
[16]
SAHARI, J. & SAPUAN, S. M. 2011. Natural fibre reinforced biodegradable polymer composite [ Online] Available from: http://www.ipme.ru/e-journals/RAMS/no_23012/05_sahari.pdf [Accessed: 15/02/2013].
[17]
TAMRAT, Y. 2013. Development of natural fiber composites for automotive applications. Course seminar 1, Addis Ababa Institute of Technology (AAIT), Addis Ababa University, Ethiopia.
[18]
DRZAL, L. T., MOHANTY, A. K., BURGUENO, R. & MISRA, M. S.a. Biobased structural composite materials for housing and infrastructure applications: opportunities and challenges [Online] Available from: https://www.google.com.ng/#q=Biobased+structural+composite+materials+for+housing+and+infrastructure+applications+%3A+opportunities+and+challenges+ [accessed: 26/03/2014].
[19]
DARSHIL, U. S. 2013. Developing plant fiber composites for structural applications by optimizing composite parameters: a critical review. Journal of materials science 48 (18): 6083 – 6107.
[20]
ANGELO, G. F., MARK, K. T. & NING Y. 2005. Predicting the elastic modulus of natural fiber reinforced thermoplastics. Composite part A: applied science and manufacturing 37: 1660 -1671.
[21]
YAN L., YIU-WING M. & LIN Y. 2000. Sisal fiber and its composites: a review of recent developments. Composite science and Technology 60: 2037 – 2055.
[22]
MIN Z. R., MING, Q. Z., YUAN L. G. C. Y. & HAN M. Z. 2001. The effect of fiber treatment on the mechanical properties of unidirectional sisal-reinforced epoxy composites. Composite science and Technology 61: 437–1447.
[23]
FUENTES, C. A., TRAN, L. Q. N., VAN H. M., JANSSENS, V., DUPONT-GILLAIN, C., VAN VUURE A. W., & VERPOEST, I. 2013. Effect of physical adhesion on mechanical behavior of bamboo fiber reinforced thermoplastic composites. Colloids and surfaces A: physicochemical and engineering aspects.
[24]
KABIR, M. M., WANG, H., LAU, K. T. & CARDONA, F. 2012. Chemical treatments on plant-based natural fiber reinforced polymer composites: an overview. Composite: part b 43: 2883 – 2892.
[25]
FAVARO, S. L., GANZERLI, T., AV DE C., NETO, A. G., DA S. O. R. R. F. & RADOVAMOVIC, E. 2010. Chemical morphological and mechanical analysis of sisal fiber- reinforced recycled high- density polyethylene composites. Journal of express polymer letters 4 (8): 465-473.
[26]
ZHONG, J. B., LV, J., WEI, C. 2007. Mechanical properties of sisal fiber reinforced urea-formaldehyde resin composites. Journal of express polymer letters 1 (10): 681 – 687.
[27]
EKUNDAYO, G., 2012. Using non-destructive testing of commercial prepreg for the manufacture of composite. M. Sc thesis, University of Bolton, Uk.
[28]
MOHANTY, A. K., M. MISRA & L. T. DRZAL. 2001. Surface modification of natural fibers and performance of the resulting biocomposites: An overview journal of composite interface 8 (05; 313-343.
[29]
KU HARRY, HOA WANG, N. PATTACHAIYAKOOP & MOHAN TREDA. 2011. A review on the tensile properties of natural fiber reinforced polymer composites. Journal of composites Part B Engineering 42 (4); 856-873.
[30]
W. D. (Rik) Brouwer, N. A (online) Available from: http://www.fao.org/docrep/004/Y1873E/y1873e0a.htm#fn30 [accessed: 27/12/2018].
[31]
MYVIZHIRAJESWARI, G. & SARAVANAN, K. 2011. Manufacturing and application of jute fiber composite. [Online] Available from: http://www.indiantextilejournal.com/articles/FAdetails.asp?id=3732 [Accessed: 01/04/2014].
[32]
BOOPALAN, M., UMAPATHY, M. J. & JENYFER, P. 2012. A comparative study on the mechanical properties of jute and sisal fiber reinforced composite. Silicon, 4: 145 – 149.
[33]
TEXTILE FASHION STUDY, 2015. Top sisal producers’ country of the world//Hard fiber producers (online) Available from: http://textilefashionstudy.com/top-sisal-producers-country-of-the-world-hard-fiber-production/ [ Accessed: 20/12/2018].
[34]
IMAGE OF SISAL FIBER. 2014. [Online] Available from: https://www.google.com.ng/search?q=sisal+fiber&tbm=isch&tbo=u&source=univ&sa=X&ei=ZcBDU_S5NtCQhQeAn4HgDw&sqi=2&ved=0CDIQsAQ&biw=1280&bih=777 [Accessed: 26/03/2014].
[35]
TEXITLE LEARNER. 2014. Sisal fiber, properties of sisal fiber, uses and application of sisal fiber. [Online] Available from: http://textilelearner.blogspot.com/2013/01/sisal-fiber-properties-of-sisal-fiber.html [Accessed: 26/03/2014].
[36]
MAJEED, K., JAWAID, M., HASSAN, A., ABU BAKAR, A., ABDUL KHALIL, H. P. S., SALEMA, A. A. & INUWA, I. 2013. Potential materials for food packaging from nanoclay/ natural fibers filled hybrid composites. Journal of materials and design 46: 391-410.
[37]
FLAVIO, D. A. S., ROMILDO D. T. F., JOAO, D. A. M. F. & EDUARDO, D. M., REGO, F. 2010. Physical and mechanical properties of durable sisal fiber-cement composites. Journal of construction and building materials 24: 777 -785.
[38]
AZWA, Z. N., YOUSIF, B. F., MANALO, A. C. & KARUNASENA, W. 2012. A review on biodegradability of polymeric composites based on natural fibers. Materials and design, 47: 424 -442.
[39]
ENCYCLOPEDIA. 2013. Sisal [Online] Available from: http://en.wikipedia.org/wiki/Sisal [Accessed: 03/02/2013].
[40]
DOAN, T. L., GAO, S. L. AND MADER, E. 2006. Jute/Polypropylene Composites I: Effect of Matrix Modification, Compos. Sci. Technol., 66 (7): 952-963.
[41]
ENCYCLOPEDIA, 2014. Jute. (Online) Available from: en.wikipedia.org/wiki/jute [Accessed: 04/05/2014].
[42]
WORLD JUTE. COM. 2015 (online) Available from: https://www.worldjute.com/ Accessed: 20/12/2018].
[43]
FLEX FORM TECHNOLOGIES, 2013. Bast fibers Jute / Hemp / Flax / Kenaf (online) Available from: http://www.naturalfibersforautomotive.com/?p=33 [ Accessed: 20/12/2018].
[44]
IMAGE OF JUTE FIBER. 2014. [Online] Available from: https://www.google.com.ng/search?q=jute+fiber&source=lnms&tbm=isch&sa=X&ei=C8NDU7TyHcy3hAeS7IFQ&sqi=2&ved=0CAYQ_AUoAQ&biw=1280&bih=777#facrc=0%3Bjute%20fiber%20plant&imgdii=_&imgrc= [Accessed: 01/04/2014].
[45]
TEXTILE FASHION STUDY. 2014. Physical and chemical properties of jute /identity of jute fiber. Textile engineering and fashion design blog [Online] Available from: http://textilefashionstudy.com/physical-chemical-properties-of-jute-identity-of-jute-fiber/ [Accessed: 25/03/2014].
[46]
ERWIN, H. L. & DAVID, S. 1996. Bast fibre applications for composites [Online] Available from: http://www.ipme.ru/e-journals/RAMS/no_23012/05_sahari.pdf [Accessed: 28/11/2012].
[47]
SRIKANTH, A. & GOPINATH, V. S.a. Design of fiber reinforced plastic launch tube. International journal of modern engineering research (IJMER) 2 (1): 127-133.
[48]
BIU, L., JIAN –ZHONG M., DANG-GE, G., LEI, H. & JING, Z. 2011. Synthesis and properties of modified rapeseed oil/montmorillonite nanocomposite fatliquoring agent. Journal of composite materials 45: 2573- 2578.
[49]
PIZHONG Q., JULIO, F. D., EVER J. B. & DUSTIN T. S.a. Step- by- step engineering design equations for FRP structural beams [Online] Available from: http://www.creativepultrusions.com/connect-with-us/technical-papers/step-by-step-engineering-design-equations-for-frp-structural-beams/ [Accessed: 23/02/2014].
[50]
SANADI, A. R., CAULFIELD, D. F., JACOBSON, R. F. & ROWELL, R. M. 1994. Reinforcing polypropylene with agricultural fibers. Proceedings International Jute and Allied Fibers Symposium on Biocomposites and Blends. New Delhi, India.
[51]
BLEDZKI, A. & GASSAN, J. 1999. Composite reinforced with cellulose – based fibres. Progress in polymer science, 24: 413-422.
[52]
MOHAMMAD, F. 2012, Thermoplastic matrix reinforced with natural fibers: a study on interfacial behavior [Online] Available from: http://www.intechopen.com/articles/show/title/thermoplastic-matrix-reinforced-with-natural-fibers-a-study-on-interfacial-behavior" [Accessed: 23/03/2014].
[53]
SANADI, A. R., CAULFIELD, D. F. & ROWELL, R. M. 1994. Reinforcing polypropylene with natural fibers. Plastic engineering, 50 (4): 27-28.
[54]
ROBERT M. J. 1999. Mechanics of composite materials. 2nd ed. Taylor & Francis Ltd., London.
[55]
EVER, J. B. 2011. Introduction to composite materials design. 2nd ed. Taylor & Francis group LLC, Broken sound parkway, NW, USA [Online] Available from: http://books.google.com.ng/books?id=fZSan7b5z0IC&printsec=frontcover&source=gbs_ge_summary_r&cad=0#v=onepage&q&f=false [Accessed: 20/04/ 2013].
[56]
NAVIN C. & PRADEEP K. R. 1994. Natural fibers and their composites. Periodical Experts Book Agency, Delhi, India.
[57]
KUCIEL, S., KUZNIAR, P. & LIBER-KNEE, A. 2010. Polymer biocomposites with renewable sources. (Online) Available from: http://www.afe.polsl.pl/index.php/en/2510/polymer-biocomposites-with-renewable-sources.pdf [Accessed: 04/04/2013].
[58]
Daniel B. B. 2010. A scientist’s guide to energy independence: oil [Online] Available from: http://www.ftpress.com/articles/article.aspx?p=1573021&seqNum=5 [Accessed: 14/03/2014].
ADDRESS
Science Publishing Group
548 FASHION AVENUE
NEW YORK, NY 10018
U.S.A.
Tel: (001)347-983-5186