Please enter verification code
Confirm
Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear
Applied Engineering
Volume 4, Issue 2, December 2020, Pages: 55-62
Received: Apr. 14, 2020; Accepted: May 6, 2020; Published: Oct. 30, 2020
Views 159      Downloads 35
Authors
Tang Rui, Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China
Ling Yun, Aviation Engineering Institute, Civil Aviation Flight University of China, Guanghan, China
Article Tools
Follow on us
Abstract
Research analysis of circular-arc-tooth-trace cylindrical gear transmission line deputy basic forming theory, the use of finite element discretization process to the entire gear model is simplified to only a single tooth model, using software ANSYS Workbench 13.0, reasonable determination of the boundary of model boundary width and depth, based on the Gleason cutter machining parameters, in UG/Open Grip environment, expand the influence of the bending strength of gear tooth line radius mechanism research, obtained under the pressure of a certain intensity, given the corresponding modulus, tooth number, pressure Angle, the parameters of the tooth width conditions, different change with the radius of tooth line, Finally, it is concluded that the bending strength of gear teeth changes with the change of tooth radius. Research has shown that lines to circular arc tooth cylindrical gear teeth, radius and its tooth bending strength have close relations, but not to say that the smaller the radius of the tooth trace of gear tooth, or, the greater the the tooth bending strength is better, but under the condition of a module, tooth line radius within a certain range, the bending strength of gear teeth.
Keywords
Circular-Arc-Tooth-Trace Cylindrical Gear, Model Simplification, Bending Strength, Meshing Performance
To cite this article
Tang Rui, Ling Yun, Analysis of the Influence of Tooth Line Radius on the Bending Strength of Circular-Arc-Tooth- Trace Cylindrical Gear, Applied Engineering. Vol. 4, No. 2, 2020, pp. 55-62. doi: 10.11648/j.ae.20200402.15
References
[1]
Sun xiaowei. Characteristics and machining methods of arc-tooth gear [J]. Mechanical engineer, 1999 (8): 22-22.
[2]
Song aiping, wu weiwei, noble, gao wenjie. Ideal geometric parameters and machining method of cylindrical gear with arc teeth [J]. Journal of Shanghai jiao tong university, 2010, 44 (12). 1735-1740.
[3]
F. l. Litvin. Gear Geometry and Applied Theory [M]. Shanghai: Shanghai science and technology press, 2008.
[4]
Xu d x, pan J s. design of cylindrical gear with curved teeth [J]. Mining machinery, 1990 (9): 49-52.
[5]
Li f s, Lin z g, Yin z f. design of non-circular gears and special gears [M]. Beijing: China machine press, 1983 (8): 226-240.
[6]
Koga Tamotsu. Method for Cutting Paired Gears having Arcuate Tooth Trace [P]. American: US003915060, 1975.
[7]
Zhu xiaolu, e zhongkai, CAI chunyuan et al. Analysis of gear bearing capacity [M]. Beijing: higher education press, 1992 (8): 191-203.
[8]
Wu weiwei, song aiping, wang zhaolei. Analysis of tooth root stress of involute cylindrical gear [J]. Mechanical design and manufacturing, 2009 (11): 228
[9]
Zou min. Parameter calculation and selection of circular circular gear [J]. Mechanical design and research, 2000, 2: 36-38.
[10]
Tang jin-yuan, Chen xing-ming, luo cai-wang. Contact analysis of cylindrical gear considering tooth modification and installation error [J]. Journal of central south university (natural science edition), 2012, 43 (5): 1703-1709.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186