Energy Efficiency of Buildings for Various Purposes

Dergunova Anna; Piksaykina Anna; Konin Maksim

doi:doi:10.11648/j.jeece.20190403.11

| Peer-Reviewed |

Energy Efficiency of Buildings for Various Purposes

Dergunova Anna, Piksaykina Anna, Konin Maksim

Received: 28 March 2019 Accepted: 10 May 2019 Published: 21 October 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The construction industry is the largest consumer of material and energy resources. Resource saving makes a great contribution to energy, environmental security and improving the quality of life of the population – the constituent elements of national security. An important part of resource saving is improving the energy efficiency of buildings. The problem of energy efficiency has been relevant for more than fifty years. Energy-efficient buildings must meet the requirements of minimum energy consumption not only at the design stage, but in general throughout the life cycle, which includes the processes of design, construction and installation works, construction control, operation and disposal. Improving of the energy efficiency of buildings is the process of bringing the design of the total reduced costs of external walling and heating of the building to the minimum possible value. The main elements of the operating costs for heating the building are fuel costs. Therefore, the optimization of the level of thermal protection of buildings will not only increase the level of energy efficiency and comfort of civil buildings, but also provide a significant economic effect, the value of which will continuously increase in accordance with the life of the building. The method of optimizing the level of energy efficiency, including thermal protection of buildings for various purposes, should help to improve the balance of wall materials and structures, so that the production of the most cost-effective products continuously increases and, accordingly, the share in the balance of less economical products decreases. As a result of this restructuring of the building materials industry can get a significant economic effect. Thus, there is a link between the level of thermal comfort of civil and industrial buildings and the increase in productivity, the reduction in the number of diseases of workers, the reduction of the corresponding costs of production and health care and, ultimately, the growth of national income.

DOI	10.11648/j.jeece.20190403.11
Published in	Journal of Energy, Environmental & Chemical Engineering (Volume 4, Issue 3, September 2019)
Page(s)	34-38
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Energy Efficiency, Thermal Protection of Buildings, Comfort of Buildings, Economic Effect, Social Effect

References

[1]	Golubtsov N. In., Efremov L. G., Hismatullin R. G. The energy efficiency of buildings and structures in the aspect of lifecycle management. Bulletin of the Chuvash University. 2013. 11, pp. 247-255.
[2]	Gorshkov A. S., Rymkevich P. P., Nemova D. V. Saving or not? Russian energy saving requirements/ Energy Saving. 2014. 2, pp. 26-32.
[3]	Matrosov, Y. A. Regulatory framework of energy efficiency in buildings at the Federal and regional levels. Heat and power efficient technology. Newsletter. 2003. 4, pp. 28-33.
[4]	Oparina, L. A. Definition of the term "energy-efficient building". Housing construction. 2010. 8, pp. 2-4.
[5]	Prokhorov V. I. Operating costs of energy, energy balance of engineering systems of the building and payback of new energy-saving solutions. Theoretical bases of heat and gas supply and ventilation. Third international scientific and technical conference: collection of reports. Moscow, MGSU, 2009, pp. 30-32.
[6]	Tabunschikov, Yu. A., Brodach M. M., Shilkin N. In. Energy Efficient buildings. Moscow, AVOK-PRESS, 2003.
[7]	Tsygankov V. M. Energy Efficiency. Russian Specifics. Energy saving. 2016. 4, pp. 28-33.
[8]	Bogoslovsky V. N. Building Thermophysics (thermo-physical fundamentals of heating, ventilation and air conditioning). V. N. Theological. St. Petersburg: ed. AVOK Severo-Zapad, 2006.
[9]	Brodach M. M., Shilkin N. B. Optimization of thermal efficiency of buildings. Walls and facades. Actual problems of Thermophysics. Moscow. 2003. P. 191-196.
[10]	Gagarin V. G. Macroeconomic aspects of justification of power saving up actions at increase of thermal protection of the protecting designs of buildings. Building materials. 2010. 3, pp. 8-16.
[11]	Gorshkov A. S, Muravyev P. A., Taraskin A. V. Increasing the level of insulation of the outer walls of a low-rise building. Energy Saving. 2016. 8, pp. 31-34.
[12]	Gorshkov A. S, Heat Engineering Characteristics of Building Envelopes. Part 2. Russian Rating Principles. Energy Saving. 2017. 8, pp. 45-50.
[13]	Tolstova Yu. I., Mikholap M. A., Komkova M. G. Optimization of thermal protection of buildings. Theoretical bases of heat and gas supply and ventilation. Fifth international scientific and technical conference: collection of reports. Moscow: MGSU, 2013. pp. 78-83.
[14]	Belyaev V. S., Granik Yu. G., Matrosov Yu. A "Energy Efficiency and Building Heat Protection". Publishing Association of Construction Universities, 2014.
[15]	Kornienko S. V. Integrated assessment of energy efficiency and thermal protection of buildings. Construction of unique buildings and structures. 2014. 11 (26), pp. 33-48.
[16]	Stakhov A. E. Kazakova S. Yu. Andrienko A. A. Evaluation of design solutions for thermal protection of buildings by economic methods. Bulletin of civil engineers. 2018. 3 (68), pp. 219-222.
[17]	Batting N. I., Nemova D. V., Rymkevich P. P., Gorshkov A. S. the Influence of the level of thermal protection of enclosing structures on the amount of heat losses in the building. Civil Engineering journal. 2012. 8, pp. 4-14.
[18]	Krivoshein A. D., Fedorov S. V. On the calculation of the reduced resistance to heat transfer of enclosing structures //civil Engineering journal. 2010. No. 8. P. 21-27.
[19]	Greenfeld G. I. Dialectics of normative requirements to resistance to heat transfer of enclosing structures. Housing construction. 2012. 1, pp. 22-24.
[20]	Al-Homoud M. S. A systematic approach for the thermal design optimization of building envelopes. Journal of building physics. 2005. Vol. 29, 2, pp. 95−119.
[21]	Moncef K. Energy audit of building systems: an engineering approach. Boca Raton: CRC Press, 2011.
[22]	SNiP 23-02-20032 "Thermal protection of buildings".

Cite This Article

Plain Text BibTeX RIS

APA Style

Dergunova Anna, Piksaykina Anna, Konin Maksim. (2019). Energy Efficiency of Buildings for Various Purposes. Journal of Energy, Environmental & Chemical Engineering, 4(3), 34-38. https://doi.org/10.11648/j.jeece.20190403.11

Copy | Download

ACS Style

Dergunova Anna; Piksaykina Anna; Konin Maksim. Energy Efficiency of Buildings for Various Purposes. J. Energy Environ. Chem. Eng. 2019, 4(3), 34-38. doi: 10.11648/j.jeece.20190403.11

Copy | Download

AMA Style

Dergunova Anna, Piksaykina Anna, Konin Maksim. Energy Efficiency of Buildings for Various Purposes. J Energy Environ Chem Eng. 2019;4(3):34-38. doi: 10.11648/j.jeece.20190403.11

Copy | Download

@article{10.11648/j.jeece.20190403.11,
  author = {Dergunova Anna and Piksaykina Anna and Konin Maksim},
  title = {Energy Efficiency of Buildings for Various Purposes},
  journal = {Journal of Energy, Environmental & Chemical Engineering},
  volume = {4},
  number = {3},
  pages = {34-38},
  doi = {10.11648/j.jeece.20190403.11},
  url = {https://doi.org/10.11648/j.jeece.20190403.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeece.20190403.11},
  abstract = {The construction industry is the largest consumer of material and energy resources. Resource saving makes a great contribution to energy, environmental security and improving the quality of life of the population – the constituent elements of national security. An important part of resource saving is improving the energy efficiency of buildings. The problem of energy efficiency has been relevant for more than fifty years. Energy-efficient buildings must meet the requirements of minimum energy consumption not only at the design stage, but in general throughout the life cycle, which includes the processes of design, construction and installation works, construction control, operation and disposal. Improving of the energy efficiency of buildings is the process of bringing the design of the total reduced costs of external walling and heating of the building to the minimum possible value. The main elements of the operating costs for heating the building are fuel costs. Therefore, the optimization of the level of thermal protection of buildings will not only increase the level of energy efficiency and comfort of civil buildings, but also provide a significant economic effect, the value of which will continuously increase in accordance with the life of the building. The method of optimizing the level of energy efficiency, including thermal protection of buildings for various purposes, should help to improve the balance of wall materials and structures, so that the production of the most cost-effective products continuously increases and, accordingly, the share in the balance of less economical products decreases. As a result of this restructuring of the building materials industry can get a significant economic effect. Thus, there is a link between the level of thermal comfort of civil and industrial buildings and the increase in productivity, the reduction in the number of diseases of workers, the reduction of the corresponding costs of production and health care and, ultimately, the growth of national income.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Energy Efficiency of Buildings for Various Purposes
AU  - Dergunova Anna
AU  - Piksaykina Anna
AU  - Konin Maksim
Y1  - 2019/10/21
PY  - 2019
N1  - https://doi.org/10.11648/j.jeece.20190403.11
DO  - 10.11648/j.jeece.20190403.11
T2  - Journal of Energy, Environmental & Chemical Engineering
JF  - Journal of Energy, Environmental & Chemical Engineering
JO  - Journal of Energy, Environmental & Chemical Engineering
SP  - 34
EP  - 38
PB  - Science Publishing Group
SN  - 2637-434X
UR  - https://doi.org/10.11648/j.jeece.20190403.11
AB  - The construction industry is the largest consumer of material and energy resources. Resource saving makes a great contribution to energy, environmental security and improving the quality of life of the population – the constituent elements of national security. An important part of resource saving is improving the energy efficiency of buildings. The problem of energy efficiency has been relevant for more than fifty years. Energy-efficient buildings must meet the requirements of minimum energy consumption not only at the design stage, but in general throughout the life cycle, which includes the processes of design, construction and installation works, construction control, operation and disposal. Improving of the energy efficiency of buildings is the process of bringing the design of the total reduced costs of external walling and heating of the building to the minimum possible value. The main elements of the operating costs for heating the building are fuel costs. Therefore, the optimization of the level of thermal protection of buildings will not only increase the level of energy efficiency and comfort of civil buildings, but also provide a significant economic effect, the value of which will continuously increase in accordance with the life of the building. The method of optimizing the level of energy efficiency, including thermal protection of buildings for various purposes, should help to improve the balance of wall materials and structures, so that the production of the most cost-effective products continuously increases and, accordingly, the share in the balance of less economical products decreases. As a result of this restructuring of the building materials industry can get a significant economic effect. Thus, there is a link between the level of thermal comfort of civil and industrial buildings and the increase in productivity, the reduction in the number of diseases of workers, the reduction of the corresponding costs of production and health care and, ultimately, the growth of national income.
VL  - 4
IS  - 3
ER  -

Copy | Download

Author Information

Dergunova Anna

Federal State Budgetary Educational Institution of Higher Education "National Research Ogarev Mordovia State University", Saransk, Russia
Piksaykina Anna

Federal State Budgetary Educational Institution of Higher Education "National Research Ogarev Mordovia State University", Saransk, Russia
Konin Maksim

Federal State Budgetary Educational Institution of Higher Education "National Research Ogarev Mordovia State University", Saransk, Russia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Dergunova Anna, Piksaykina Anna, Konin Maksim. (2019). Energy Efficiency of Buildings for Various Purposes. Journal of Energy, Environmental & Chemical Engineering, 4(3), 34-38. https://doi.org/10.11648/j.jeece.20190403.11

Copy | Download

ACS Style

Dergunova Anna; Piksaykina Anna; Konin Maksim. Energy Efficiency of Buildings for Various Purposes. J. Energy Environ. Chem. Eng. 2019, 4(3), 34-38. doi: 10.11648/j.jeece.20190403.11

Copy | Download

AMA Style

Dergunova Anna, Piksaykina Anna, Konin Maksim. Energy Efficiency of Buildings for Various Purposes. J Energy Environ Chem Eng. 2019;4(3):34-38. doi: 10.11648/j.jeece.20190403.11

Copy | Download

@article{10.11648/j.jeece.20190403.11,
  author = {Dergunova Anna and Piksaykina Anna and Konin Maksim},
  title = {Energy Efficiency of Buildings for Various Purposes},
  journal = {Journal of Energy, Environmental & Chemical Engineering},
  volume = {4},
  number = {3},
  pages = {34-38},
  doi = {10.11648/j.jeece.20190403.11},
  url = {https://doi.org/10.11648/j.jeece.20190403.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeece.20190403.11},
  abstract = {The construction industry is the largest consumer of material and energy resources. Resource saving makes a great contribution to energy, environmental security and improving the quality of life of the population – the constituent elements of national security. An important part of resource saving is improving the energy efficiency of buildings. The problem of energy efficiency has been relevant for more than fifty years. Energy-efficient buildings must meet the requirements of minimum energy consumption not only at the design stage, but in general throughout the life cycle, which includes the processes of design, construction and installation works, construction control, operation and disposal. Improving of the energy efficiency of buildings is the process of bringing the design of the total reduced costs of external walling and heating of the building to the minimum possible value. The main elements of the operating costs for heating the building are fuel costs. Therefore, the optimization of the level of thermal protection of buildings will not only increase the level of energy efficiency and comfort of civil buildings, but also provide a significant economic effect, the value of which will continuously increase in accordance with the life of the building. The method of optimizing the level of energy efficiency, including thermal protection of buildings for various purposes, should help to improve the balance of wall materials and structures, so that the production of the most cost-effective products continuously increases and, accordingly, the share in the balance of less economical products decreases. As a result of this restructuring of the building materials industry can get a significant economic effect. Thus, there is a link between the level of thermal comfort of civil and industrial buildings and the increase in productivity, the reduction in the number of diseases of workers, the reduction of the corresponding costs of production and health care and, ultimately, the growth of national income.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Energy Efficiency of Buildings for Various Purposes
AU  - Dergunova Anna
AU  - Piksaykina Anna
AU  - Konin Maksim
Y1  - 2019/10/21
PY  - 2019
N1  - https://doi.org/10.11648/j.jeece.20190403.11
DO  - 10.11648/j.jeece.20190403.11
T2  - Journal of Energy, Environmental & Chemical Engineering
JF  - Journal of Energy, Environmental & Chemical Engineering
JO  - Journal of Energy, Environmental & Chemical Engineering
SP  - 34
EP  - 38
PB  - Science Publishing Group
SN  - 2637-434X
UR  - https://doi.org/10.11648/j.jeece.20190403.11
AB  - The construction industry is the largest consumer of material and energy resources. Resource saving makes a great contribution to energy, environmental security and improving the quality of life of the population – the constituent elements of national security. An important part of resource saving is improving the energy efficiency of buildings. The problem of energy efficiency has been relevant for more than fifty years. Energy-efficient buildings must meet the requirements of minimum energy consumption not only at the design stage, but in general throughout the life cycle, which includes the processes of design, construction and installation works, construction control, operation and disposal. Improving of the energy efficiency of buildings is the process of bringing the design of the total reduced costs of external walling and heating of the building to the minimum possible value. The main elements of the operating costs for heating the building are fuel costs. Therefore, the optimization of the level of thermal protection of buildings will not only increase the level of energy efficiency and comfort of civil buildings, but also provide a significant economic effect, the value of which will continuously increase in accordance with the life of the building. The method of optimizing the level of energy efficiency, including thermal protection of buildings for various purposes, should help to improve the balance of wall materials and structures, so that the production of the most cost-effective products continuously increases and, accordingly, the share in the balance of less economical products decreases. As a result of this restructuring of the building materials industry can get a significant economic effect. Thus, there is a link between the level of thermal comfort of civil and industrial buildings and the increase in productivity, the reduction in the number of diseases of workers, the reduction of the corresponding costs of production and health care and, ultimately, the growth of national income.
VL  - 4
IS  - 3
ER  -

Copy | Download