Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell

Ezeh Marian Isioma; Okujagu Charity Ukpok-awaji; Ezema Fabian Ifeanyichukwu

doi:doi:10.11648/j.ijpp.20210501.11

| Peer-Reviewed

Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell

Ezeh Marian Isioma, Okujagu Charity Ukpok-awaji, Ezema Fabian Ifeanyichukwu

Published in International Journal of Photochemistry and Photobiology (Volume 5, Issue 1)

Received: 18 November 2020 Accepted: 15 December 2020 Published: 10 March 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Dye sensitized solar cell have been fabricated since 19191 till date. In the previous year’s seven cells were fabricated and arranged in series to build a solar module for electricity generation under which 2.0 volt diode bulb was lightened. Further study was carried out here where the electrolyte was improved upon using potassium iodide with F- centre factor that enhances light harvesting but in the course of the study the fabricated DSSCs exhibited in stability due to the delay in carrying out the I-V characteristics. Three of these dye sensitized solar cells were successfully fabricated using natural dye from Laali stem bark (Isoplumbagin) dye as sensitizer, with two metallic composition titanium doxide/ Zinc oxide (TiO₂/ZnO) on Flourine doped tin oxide as the substrate which comprises of the Anode or electrode and carbon soot as the counter electrode or the cathode. These three DSSCs were arranged in series to build a solar panel. From the results obtained, Current-voltage characteristics showed that current was 0.03A and voltage 2.0 m A with power output 0.06k watt and the curve showed a forward bias pattern as with the case of a diode. From the pattern of the curve showed that the DSSCs deviated from cells that display efficiency to a diode that operates with the PN theory.

Published in	International Journal of Photochemistry and Photobiology (Volume 5, Issue 1)
DOI	10.11648/j.ijpp.20210501.11
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Panel, Anode, Dye, Sensitizer, Carbon Soot, cathode, Fabrication

References

[1]	O’Regan B and Gratzel M (1991) A low-cost high efficiency solar cell based on dye-sensitized colloidal TiO₂ films Nature, 353: 737-740.
[2]	Ezeh, M. I, Osuji R. U, Azi S. O and Egwuanunkwu D (2013) Comparison between the performance of Anthocaynin dye with Methythionium Journal of Nigerian Association of Mathematical Physics 24: 365-370.
[3]	Eyekpegha O. F and Ezeh M. I (2014) Comparative Study between Zobo and Tomato Dye on the Fabrication of Dye Sensitized Solar Cell Using ITO/TiO₂/ZnO/Dye-Sensitized Proceedings of the 1st African International Conference/Workshop on Applications of Nanotechnology to Energy, Health and Environment, UNN, March 23 – 29, 2014, 38-46.
[4]	Ezeh, M. I, Osuji, R. U and Ogbe E. J (2014) Fabrication of dye sensitized solar cell using FTO/TiO₂/Anthocyanin dye/ZnO Nigerian Journal of Physics. 25 (2): 107-116.
[5]	Ezeh, M. I, Eyekpegha O. F and Mayiko O. L (2014) Fabricaion of dye sensitized solar cell using ITO/TiO₂/ZnO/Tomato dye natural dye sensitized Journal of Nigerian Association of mathematical Physics 27 (1): 341-346.
[6]	Ezeh M. I, Dare, E. O and Eyekpega O. F (2014) Improving the efficiency and the long term stability of a dye-sensitized solar cells Proceedings of the 1^st International workshop on Renewable Energy for sustainable Development in Africa (IWRESDA). 55-66.
[7]	Ejuwevwo, S. O (2014) Comparision oF FTO/ITO and Lycopene/Anthocaynin dye doped ZnO and TiO₂ in the fabrication of dye sensitized solar cell (unpublished thesis).
[8]	Eko, O. J, Omaghomi J, Madaugwu E. N, Oviosu C. U, Ogbuigwe S and Asunbye M. S (2015) Contruction of a solar Panel using locally available materials. Unpublished Thesis.
[9]	Wasui B. A, Enock O. D, Damilola A. B, Samson O. A, Fatai O. O, Bukola O. B, Ezeh M and Osuji R. U (2017) “Dye-Modified ZnO Nanohybrids: Optical properties of the potential Solar Cell Nanocomposities” International Nanoletters Saudi. 7 (3): 171-179.
[10]	Azhar F, Rajan J, Thomas M. B, Francisco F. S and Juan B (2014) A perspective on the production of dye sensitized solar module Journal of Energy and Environment 12: 1-72.
[11]	Boyo O, Boyo O, Abdusalam T and Adeola S. (2012) Dye sensitized nanocrystaline titania solar cell using Laali stem bark (lawsonia inermis). Transnational Journal of Science and Technology 2: 60-68.
[12]	Sanghoon Yoon, Sehyun T, Jinsoo K, Yongseok J, Kisuk K and Jiyoung P (2011) Application of transparent dye sensitized solar cells to build integrated Photovoltaic System Journal of building and Environment 46: 1899-1904.
[13]	Philip Hurley (2006) Build your own solar panel Revised and expanded.
[14]	Kamrul A. K (2017) Impact of Photo electrode thickness and annealing temperature on natural dye sensitized solar cell Sustainale Energy Technologies and Assessments Elsevier.
[15]	Odike O. C and Sigalo F. B (2018) The mechanism of thermal staticstical of an electronic device (Diode) Journal of scientific and Engineering Research 5 (5): 131-138.
[16]	Young, A. T. (2007). Rayleigh scattering. Applied Opt. 20, 522-535.

Cite This Article

Plain Text BibTeX RIS

APA Style

Ezeh Marian Isioma, Okujagu Charity Ukpok-awaji, Ezema Fabian Ifeanyichukwu. (2021). Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell. International Journal of Photochemistry and Photobiology, 5(1), 1-6. https://doi.org/10.11648/j.ijpp.20210501.11

Copy | Download

ACS Style

Ezeh Marian Isioma; Okujagu Charity Ukpok-awaji; Ezema Fabian Ifeanyichukwu. Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell. Int. J. Photochem. Photobiol. 2021, 5(1), 1-6. doi: 10.11648/j.ijpp.20210501.11

Copy | Download

AMA Style

Ezeh Marian Isioma, Okujagu Charity Ukpok-awaji, Ezema Fabian Ifeanyichukwu. Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell. Int J Photochem Photobiol. 2021;5(1):1-6. doi: 10.11648/j.ijpp.20210501.11

Copy | Download

@article{10.11648/j.ijpp.20210501.11,
  author = {Ezeh Marian Isioma and Okujagu Charity Ukpok-awaji and Ezema Fabian Ifeanyichukwu},
  title = {Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell},
  journal = {International Journal of Photochemistry and Photobiology},
  volume = {5},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.ijpp.20210501.11},
  url = {https://doi.org/10.11648/j.ijpp.20210501.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijpp.20210501.11},
  abstract = {Dye sensitized solar cell have been fabricated since 19191 till date. In the previous year’s seven cells were fabricated and arranged in series to build a solar module for electricity generation under which 2.0 volt diode bulb was lightened. Further study was carried out here where the electrolyte was improved upon using potassium iodide with F- centre factor that enhances light harvesting but in the course of the study the fabricated DSSCs exhibited in stability due to the delay in carrying out the I-V characteristics. Three of these dye sensitized solar cells were successfully fabricated using natural dye from Laali stem bark (Isoplumbagin) dye as sensitizer, with two metallic composition titanium doxide/ Zinc oxide (TiO2/ZnO) on Flourine doped tin oxide as the substrate which comprises of the Anode or electrode and carbon soot as the counter electrode or the cathode. These three DSSCs were arranged in series to build a solar panel. From the results obtained, Current-voltage characteristics showed that current was 0.03A and voltage 2.0 m A with power output 0.06k watt and the curve showed a forward bias pattern as with the case of a diode. From the pattern of the curve showed that the DSSCs deviated from cells that display efficiency to a diode that operates with the PN theory.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell
AU  - Ezeh Marian Isioma
AU  - Okujagu Charity Ukpok-awaji
AU  - Ezema Fabian Ifeanyichukwu
Y1  - 2021/03/10
PY  - 2021
N1  - https://doi.org/10.11648/j.ijpp.20210501.11
DO  - 10.11648/j.ijpp.20210501.11
T2  - International Journal of Photochemistry and Photobiology
JF  - International Journal of Photochemistry and Photobiology
JO  - International Journal of Photochemistry and Photobiology
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2640-429X
UR  - https://doi.org/10.11648/j.ijpp.20210501.11
AB  - Dye sensitized solar cell have been fabricated since 19191 till date. In the previous year’s seven cells were fabricated and arranged in series to build a solar module for electricity generation under which 2.0 volt diode bulb was lightened. Further study was carried out here where the electrolyte was improved upon using potassium iodide with F- centre factor that enhances light harvesting but in the course of the study the fabricated DSSCs exhibited in stability due to the delay in carrying out the I-V characteristics. Three of these dye sensitized solar cells were successfully fabricated using natural dye from Laali stem bark (Isoplumbagin) dye as sensitizer, with two metallic composition titanium doxide/ Zinc oxide (TiO2/ZnO) on Flourine doped tin oxide as the substrate which comprises of the Anode or electrode and carbon soot as the counter electrode or the cathode. These three DSSCs were arranged in series to build a solar panel. From the results obtained, Current-voltage characteristics showed that current was 0.03A and voltage 2.0 m A with power output 0.06k watt and the curve showed a forward bias pattern as with the case of a diode. From the pattern of the curve showed that the DSSCs deviated from cells that display efficiency to a diode that operates with the PN theory.
VL  - 5
IS  - 1
ER  -

Copy | Download

Author Information

Ezeh Marian Isioma

Department of Physics, Delta State University, Abraka, Nigeria
Okujagu Charity Ukpok-awaji

Department of Physics, University of Port-Harcourt, Rivers, Nigeria
Ezema Fabian Ifeanyichukwu

Department of Physics and Astronomy, University of Nigeria, Nsukka, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Ezeh Marian Isioma, Okujagu Charity Ukpok-awaji, Ezema Fabian Ifeanyichukwu. (2021). Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell. International Journal of Photochemistry and Photobiology, 5(1), 1-6. https://doi.org/10.11648/j.ijpp.20210501.11

Copy | Download

ACS Style

Ezeh Marian Isioma; Okujagu Charity Ukpok-awaji; Ezema Fabian Ifeanyichukwu. Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell. Int. J. Photochem. Photobiol. 2021, 5(1), 1-6. doi: 10.11648/j.ijpp.20210501.11

Copy | Download

AMA Style

Ezeh Marian Isioma, Okujagu Charity Ukpok-awaji, Ezema Fabian Ifeanyichukwu. Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell. Int J Photochem Photobiol. 2021;5(1):1-6. doi: 10.11648/j.ijpp.20210501.11

Copy | Download

@article{10.11648/j.ijpp.20210501.11,
  author = {Ezeh Marian Isioma and Okujagu Charity Ukpok-awaji and Ezema Fabian Ifeanyichukwu},
  title = {Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell},
  journal = {International Journal of Photochemistry and Photobiology},
  volume = {5},
  number = {1},
  pages = {1-6},
  doi = {10.11648/j.ijpp.20210501.11},
  url = {https://doi.org/10.11648/j.ijpp.20210501.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijpp.20210501.11},
  abstract = {Dye sensitized solar cell have been fabricated since 19191 till date. In the previous year’s seven cells were fabricated and arranged in series to build a solar module for electricity generation under which 2.0 volt diode bulb was lightened. Further study was carried out here where the electrolyte was improved upon using potassium iodide with F- centre factor that enhances light harvesting but in the course of the study the fabricated DSSCs exhibited in stability due to the delay in carrying out the I-V characteristics. Three of these dye sensitized solar cells were successfully fabricated using natural dye from Laali stem bark (Isoplumbagin) dye as sensitizer, with two metallic composition titanium doxide/ Zinc oxide (TiO2/ZnO) on Flourine doped tin oxide as the substrate which comprises of the Anode or electrode and carbon soot as the counter electrode or the cathode. These three DSSCs were arranged in series to build a solar panel. From the results obtained, Current-voltage characteristics showed that current was 0.03A and voltage 2.0 m A with power output 0.06k watt and the curve showed a forward bias pattern as with the case of a diode. From the pattern of the curve showed that the DSSCs deviated from cells that display efficiency to a diode that operates with the PN theory.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Building a Solar Panel for Electricity Generation in the Fabrication of Dye Sensitized Solar Cell
AU  - Ezeh Marian Isioma
AU  - Okujagu Charity Ukpok-awaji
AU  - Ezema Fabian Ifeanyichukwu
Y1  - 2021/03/10
PY  - 2021
N1  - https://doi.org/10.11648/j.ijpp.20210501.11
DO  - 10.11648/j.ijpp.20210501.11
T2  - International Journal of Photochemistry and Photobiology
JF  - International Journal of Photochemistry and Photobiology
JO  - International Journal of Photochemistry and Photobiology
SP  - 1
EP  - 6
PB  - Science Publishing Group
SN  - 2640-429X
UR  - https://doi.org/10.11648/j.ijpp.20210501.11
AB  - Dye sensitized solar cell have been fabricated since 19191 till date. In the previous year’s seven cells were fabricated and arranged in series to build a solar module for electricity generation under which 2.0 volt diode bulb was lightened. Further study was carried out here where the electrolyte was improved upon using potassium iodide with F- centre factor that enhances light harvesting but in the course of the study the fabricated DSSCs exhibited in stability due to the delay in carrying out the I-V characteristics. Three of these dye sensitized solar cells were successfully fabricated using natural dye from Laali stem bark (Isoplumbagin) dye as sensitizer, with two metallic composition titanium doxide/ Zinc oxide (TiO2/ZnO) on Flourine doped tin oxide as the substrate which comprises of the Anode or electrode and carbon soot as the counter electrode or the cathode. These three DSSCs were arranged in series to build a solar panel. From the results obtained, Current-voltage characteristics showed that current was 0.03A and voltage 2.0 m A with power output 0.06k watt and the curve showed a forward bias pattern as with the case of a diode. From the pattern of the curve showed that the DSSCs deviated from cells that display efficiency to a diode that operates with the PN theory.
VL  - 5
IS  - 1
ER  -

Copy | Download