Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry

Boateng Leslie Appiah

doi:doi:10.11648/j.jccee.20200506.11

| Peer-Reviewed

Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry

Boateng Leslie Appiah

Published in Journal of Civil, Construction and Environmental Engineering (Volume 5, Issue 6)

Received: 20 September 2020 Accepted: 5 October 2020 Published: 30 October 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Building Information Modeling (BIM) is an intelligent 3D model-based process that gives architectural, engineering, and construction (AEC) professionals the insight and tools to more efficiently plan, design, construct, and manage buildings and infrastructures. The introduction and implementation of BIM has brought changes in the construction’s traditional procurement system and this has made its adoption a bit slow and difficult to take off swiftly and more officially. Previous researches have identified gaps in contractual relationships, roles and the resulting risks in BIM implementation. This paper focuses on the adoption of BIM in the Ghanaian Construction Industry thereby highlighting the concept of BIM in enhancing productivity and also determines the level of knowledge and awareness of BIM by industry players and stakeholders as well as establishing the extent of usage of BIM in the Ghanaian construction industry. A descriptive survey research was conducted with both structured and unstructured questionnaire and administered both via e-mail and by sending questionnaire link onto a WhatsApp platform groups of the respondents and out of the 263 respondents that took part in the survey, 78 respondents feedback were incomplete so 185 member respondents results were analyzed in the form of bar charts, column chart and pie chart representing 70.3% response rate. The research survey respondents comprised of Civil Engineers, Construction Project Managers, Architects, Electrical Engineers, Quantity Surveyors, Mechanical Engineers, Contractors and Facility Managers. The survey results revealed that there is a low level of knowledge of Building Information Modeling (BIM) and its concept in the Ghanaian Construction Industry which is also associated with the low level of awareness, utilization and adoption among stakeholders. BIM therefore represents a new paradigm within AEC that encourages integration of the roles of all stakeholders on the effective execution of projects and therefore edge the participation of relevant professional bodies to facilitate its implementation in order to ensure adequate knowledge of BIM towards improving productivity and efficiency in the Construction Industry.

Published in	Journal of Civil, Construction and Environmental Engineering (Volume 5, Issue 6)
DOI	10.11648/j.jccee.20200506.11
Page(s)	138-150
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Building Information Modeling, Construction Traditional Procurement System, Contractual Relationships, Ghanaian Construction Industry, Descriptive Survey Research, Structured Questionnaire, Respondent Results

References

[1]	https://www.autodesk.com/solutions/bim/benefits-of-bim.
[2]	https://www.thebalancesmb.com/introduction-to-building-information-modeling-bim-845046.
[3]	Carmona, J., and Irwin, K. (2007). “BIM: Who, what, how and why.” Building Operating Management. (http://www.facilitiesnet.com/software/article/BIM-Who-What-How-and-Why–7546) (August 21, 2009).
[4]	Abbasnejad, B. and Moud, H. I. (2013) BIM and Basic Challenges Associated with Its Definitions, Interpretations and Expectations. International Journal of Engineering Research and Applications (IJERA), 3, 287-294.
[5]	Eastman, C., Eastman, C. M., Teicholz, P. and Sacks, R. (2011) BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors. John Wiley & Sons, Hoboken.
[6]	Hartmann, T., van Meerveld, H., Vossebeld, N. and Adriaanse, A. (2012) Aligning Building Information Model Tools and Construction Management Methods. Automation in Construction, 22, 605-613. http://dx.doi.org/10.1016/j.autcon.2011.12.011.
[7]	Bouška, R. (2016) Evaluation of Maturity of BIM Tools across Different Software Platforms. Procedia Engineering, 164, 481-486. https://doi.org/10.1016/j.proeng.2016.11.648.
[8]	Kalinichuk, S. (2015) Building Information Modeling. Journal of Systems Integration, 3, 25-34. https://doi.org/10.20470/jsi.v6i3.235.
[9]	Kuiper, I. and Dominik, H. (2013) Rethinking the Contractual Context for Building Information Modeling (BIM) in the Australian Built Environment Industry. Australasian Journal of Construction Economics and Building, 13, 1-17. https://doi.org/10.5130/AJCEB.v13i4.3630.
[10]	Mouzas, S. and Blois, K. (2007) Relational Contract Theory: Confirmations and Contradictions.
[11]	Azhar, S., Khalfan, M. and Maqsood, T. (2012) Status of BIM Adoption and the BIM Experience of Cost Consultants in Australia. Australasian Journal of Construction Economics and Building, 12, 15-28. https://doi.org/10.5130/AJCEB.v12i4.3032.
[12]	https://bim360resources.autodesk.com/connect-and-construct/top-10-benefits-of-bim-in-construction.
[13]	CRC Construction Innovation. (2007). Adopting BIM for Facilities Management: Solutions for Managing the Sydney Opera House, Cooperative Research Center for Construction Innovation, Brisbane, Australia.
[14]	GOV. UK (2012), “Building Information Modeling Industrial Strategy: Government and Industry in Partnership.” Department for Business, Innovation and Skills (BIS). London. p7.
[15]	Eastman C, Teicholz P, Sacks R, Liston K. BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors. Second Edition ed. USA: Wiley; 2011.
[16]	Douglas E. Chelson. The effects of building information modeling on construction site productivity. United States -- Maryland: University of Maryland, College Park; 2010.
[17]	Thompson, D. B. (2001). “e-Construction: Don’t get soaked by the next wave.” Construction Law Briefing Paper. (http://www.minnlaw.com/Articles/ 68553.pdf) (August 29, 2009).
[18]	Rosenberg, T. L. (2007). “Building information modeling.” (http://www.ralaw.com/resources/documents/Building%20Information%20 Modeling%20-%20Rosenberg.pdf) (August 22, 2009).
[19]	Thompson, D. B., and Miner, R. G. (2007). “Building information modeling—BIM: Contractual risks are changing with technology.” (http://www.aepronet.org/ge/no35.html) (August 22, 2009).
[20]	Building Design and Construction. (2008). “New AIA documents include BIM agreement and two new IPD contracts.” (http://www.bdcnetwork.com/ article/CA6600255.html) (August 29, 2009).
[21]	Alufohai. A. J, (2012), “Adoption of Building Information Modeling and Nigeria's Quest for Project Cost Management.” Available at: https://www.fig.net/pub/fig2012/papers/ts08j/TS08J_alufohai_6225.pd f (accessed November 2013).
[22]	Borjeghaleh, R. M. and Sardrou, J. M. (2016) Approaching Industrialization of Buildings and Integrated Construction Using Building Information Modeling. Procedia Engineering, 164, 534-541. https://doi.org/10.1016/j.proeng.2016.11.655.
[23]	Bosch-Sijtsema, P. and Gluch, P. (2019) Challenging Construction Project Management Institutions: The Role and Agency of BIM Actors. International Journal of Construction Management, 1-11. https://doi.org/10.1080/15623599.2019.1602585.
[24]	Arshad, M. F., Thaheem, M. J., Nasir, A. R. and Malik, M. S. A. (2019) Contractual Risks of Building Information Modeling: Toward a Standardized Legal Framework for Design-Bid-Build Projects Standardized Legal Framework for Design-Bid-Build Projects. Journal of Construction Engineering and Management, 145, 1-14. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001617.
[25]	Manderson, A., Jefferies, M. and Brewer, G. (2015) Building Information Modeling and Standardized Construction Contracts: A Content Analysis of the GC21 Contract. Construction Economics and Building, 15, 72-84. https://doi.org/10.5130/AJCEB.v15i3.4608.
[26]	Eadie, R., McLernon, T. and Patton, A. (2015) An Investigation into the Legal Issues Relating to Building Information Modeling (BIM). RICS COBRA AUBEA 2015, Sydney, 8-10 July 2015, p. 8.
[27]	Bui, N., Merschbrock, C. and Munkvold, B. E. (2016) A Review of Building Information Modeling for Construction in Developing Countries. Procedia Engineering, 164, 487-494. https://doi.org/10.1016/j.proeng.2016.11.649.
[28]	Hosseini, M. R., Azari, E., Tivendale, L., Banihashemi, S. and Chileshe, N. (2016) Building Information Modeling (BIM) in Iran: An Exploratory Study. Journal of Engineering, Project, and Production Management, 6, 78-89. https://doi.org/10.32738/JEPPM.201607.0002.
[29]	Ali, A. (2016) Building Information Modeling (BIM) and Project Management Implementation in Infrastructure and Civil Construction.
[30]	Azhar, S., Hein, M., and Sketo, B. (2008). “Building information modeling: Benefits, risks and challenges.” Proc., 44th Associated Schools of Construction National Conference, Auburn, AL.
[31]	Bernstein, P. G., and Pittman, J. H. (2005). “Barriers to the adoption of building information modeling in the building industry.” Autodesk Building Solutions Whitepaper, Autodesk Inc., San Rafael, CA.
[32]	Associated General Contractors of America. (2005). The contractor’s guide to BIM, 1st Ed., AGC Research Foundation, Las Vegas, NV.
[33]	Post, N. (2009). “Building team members see progress and problems.” Eng. News-Rec., 262 (12), 28.

Cite This Article

Plain Text BibTeX RIS

APA Style

Boateng Leslie Appiah. (2020). Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry. Journal of Civil, Construction and Environmental Engineering, 5(6), 138-150. https://doi.org/10.11648/j.jccee.20200506.11

Copy | Download

ACS Style

Boateng Leslie Appiah. Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry. J. Civ. Constr. Environ. Eng. 2020, 5(6), 138-150. doi: 10.11648/j.jccee.20200506.11

Copy | Download

AMA Style

Boateng Leslie Appiah. Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry. J Civ Constr Environ Eng. 2020;5(6):138-150. doi: 10.11648/j.jccee.20200506.11

Copy | Download

@article{10.11648/j.jccee.20200506.11,
  author = {Boateng Leslie Appiah},
  title = {Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry},
  journal = {Journal of Civil, Construction and Environmental Engineering},
  volume = {5},
  number = {6},
  pages = {138-150},
  doi = {10.11648/j.jccee.20200506.11},
  url = {https://doi.org/10.11648/j.jccee.20200506.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jccee.20200506.11},
  abstract = {Building Information Modeling (BIM) is an intelligent 3D model-based process that gives architectural, engineering, and construction (AEC) professionals the insight and tools to more efficiently plan, design, construct, and manage buildings and infrastructures. The introduction and implementation of BIM has brought changes in the construction’s traditional procurement system and this has made its adoption a bit slow and difficult to take off swiftly and more officially. Previous researches have identified gaps in contractual relationships, roles and the resulting risks in BIM implementation. This paper focuses on the adoption of BIM in the Ghanaian Construction Industry thereby highlighting the concept of BIM in enhancing productivity and also determines the level of knowledge and awareness of BIM by industry players and stakeholders as well as establishing the extent of usage of BIM in the Ghanaian construction industry. A descriptive survey research was conducted with both structured and unstructured questionnaire and administered both via e-mail and by sending questionnaire link onto a WhatsApp platform groups of the respondents and out of the 263 respondents that took part in the survey, 78 respondents feedback were incomplete so 185 member respondents results were analyzed in the form of bar charts, column chart and pie chart representing 70.3% response rate. The research survey respondents comprised of Civil Engineers, Construction Project Managers, Architects, Electrical Engineers, Quantity Surveyors, Mechanical Engineers, Contractors and Facility Managers. The survey results revealed that there is a low level of knowledge of Building Information Modeling (BIM) and its concept in the Ghanaian Construction Industry which is also associated with the low level of awareness, utilization and adoption among stakeholders. BIM therefore represents a new paradigm within AEC that encourages integration of the roles of all stakeholders on the effective execution of projects and therefore edge the participation of relevant professional bodies to facilitate its implementation in order to ensure adequate knowledge of BIM towards improving productivity and efficiency in the Construction Industry.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry
AU  - Boateng Leslie Appiah
Y1  - 2020/10/30
PY  - 2020
N1  - https://doi.org/10.11648/j.jccee.20200506.11
DO  - 10.11648/j.jccee.20200506.11
T2  - Journal of Civil, Construction and Environmental Engineering
JF  - Journal of Civil, Construction and Environmental Engineering
JO  - Journal of Civil, Construction and Environmental Engineering
SP  - 138
EP  - 150
PB  - Science Publishing Group
SN  - 2637-3890
UR  - https://doi.org/10.11648/j.jccee.20200506.11
AB  - Building Information Modeling (BIM) is an intelligent 3D model-based process that gives architectural, engineering, and construction (AEC) professionals the insight and tools to more efficiently plan, design, construct, and manage buildings and infrastructures. The introduction and implementation of BIM has brought changes in the construction’s traditional procurement system and this has made its adoption a bit slow and difficult to take off swiftly and more officially. Previous researches have identified gaps in contractual relationships, roles and the resulting risks in BIM implementation. This paper focuses on the adoption of BIM in the Ghanaian Construction Industry thereby highlighting the concept of BIM in enhancing productivity and also determines the level of knowledge and awareness of BIM by industry players and stakeholders as well as establishing the extent of usage of BIM in the Ghanaian construction industry. A descriptive survey research was conducted with both structured and unstructured questionnaire and administered both via e-mail and by sending questionnaire link onto a WhatsApp platform groups of the respondents and out of the 263 respondents that took part in the survey, 78 respondents feedback were incomplete so 185 member respondents results were analyzed in the form of bar charts, column chart and pie chart representing 70.3% response rate. The research survey respondents comprised of Civil Engineers, Construction Project Managers, Architects, Electrical Engineers, Quantity Surveyors, Mechanical Engineers, Contractors and Facility Managers. The survey results revealed that there is a low level of knowledge of Building Information Modeling (BIM) and its concept in the Ghanaian Construction Industry which is also associated with the low level of awareness, utilization and adoption among stakeholders. BIM therefore represents a new paradigm within AEC that encourages integration of the roles of all stakeholders on the effective execution of projects and therefore edge the participation of relevant professional bodies to facilitate its implementation in order to ensure adequate knowledge of BIM towards improving productivity and efficiency in the Construction Industry.
VL  - 5
IS  - 6
ER  -

Copy | Download

Author Information

Boateng Leslie Appiah

School of Urban Construction and Civil Engineering, Yangtze University, Jingzhou, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Boateng Leslie Appiah. (2020). Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry. Journal of Civil, Construction and Environmental Engineering, 5(6), 138-150. https://doi.org/10.11648/j.jccee.20200506.11

Copy | Download

ACS Style

Boateng Leslie Appiah. Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry. J. Civ. Constr. Environ. Eng. 2020, 5(6), 138-150. doi: 10.11648/j.jccee.20200506.11

Copy | Download

AMA Style

Boateng Leslie Appiah. Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry. J Civ Constr Environ Eng. 2020;5(6):138-150. doi: 10.11648/j.jccee.20200506.11

Copy | Download

@article{10.11648/j.jccee.20200506.11,
  author = {Boateng Leslie Appiah},
  title = {Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry},
  journal = {Journal of Civil, Construction and Environmental Engineering},
  volume = {5},
  number = {6},
  pages = {138-150},
  doi = {10.11648/j.jccee.20200506.11},
  url = {https://doi.org/10.11648/j.jccee.20200506.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jccee.20200506.11},
  abstract = {Building Information Modeling (BIM) is an intelligent 3D model-based process that gives architectural, engineering, and construction (AEC) professionals the insight and tools to more efficiently plan, design, construct, and manage buildings and infrastructures. The introduction and implementation of BIM has brought changes in the construction’s traditional procurement system and this has made its adoption a bit slow and difficult to take off swiftly and more officially. Previous researches have identified gaps in contractual relationships, roles and the resulting risks in BIM implementation. This paper focuses on the adoption of BIM in the Ghanaian Construction Industry thereby highlighting the concept of BIM in enhancing productivity and also determines the level of knowledge and awareness of BIM by industry players and stakeholders as well as establishing the extent of usage of BIM in the Ghanaian construction industry. A descriptive survey research was conducted with both structured and unstructured questionnaire and administered both via e-mail and by sending questionnaire link onto a WhatsApp platform groups of the respondents and out of the 263 respondents that took part in the survey, 78 respondents feedback were incomplete so 185 member respondents results were analyzed in the form of bar charts, column chart and pie chart representing 70.3% response rate. The research survey respondents comprised of Civil Engineers, Construction Project Managers, Architects, Electrical Engineers, Quantity Surveyors, Mechanical Engineers, Contractors and Facility Managers. The survey results revealed that there is a low level of knowledge of Building Information Modeling (BIM) and its concept in the Ghanaian Construction Industry which is also associated with the low level of awareness, utilization and adoption among stakeholders. BIM therefore represents a new paradigm within AEC that encourages integration of the roles of all stakeholders on the effective execution of projects and therefore edge the participation of relevant professional bodies to facilitate its implementation in order to ensure adequate knowledge of BIM towards improving productivity and efficiency in the Construction Industry.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Assessment of Building Information Modeling (BIM) Awareness, Knowledge and Its Adoption in the Ghanaian Construction Industry
AU  - Boateng Leslie Appiah
Y1  - 2020/10/30
PY  - 2020
N1  - https://doi.org/10.11648/j.jccee.20200506.11
DO  - 10.11648/j.jccee.20200506.11
T2  - Journal of Civil, Construction and Environmental Engineering
JF  - Journal of Civil, Construction and Environmental Engineering
JO  - Journal of Civil, Construction and Environmental Engineering
SP  - 138
EP  - 150
PB  - Science Publishing Group
SN  - 2637-3890
UR  - https://doi.org/10.11648/j.jccee.20200506.11
AB  - Building Information Modeling (BIM) is an intelligent 3D model-based process that gives architectural, engineering, and construction (AEC) professionals the insight and tools to more efficiently plan, design, construct, and manage buildings and infrastructures. The introduction and implementation of BIM has brought changes in the construction’s traditional procurement system and this has made its adoption a bit slow and difficult to take off swiftly and more officially. Previous researches have identified gaps in contractual relationships, roles and the resulting risks in BIM implementation. This paper focuses on the adoption of BIM in the Ghanaian Construction Industry thereby highlighting the concept of BIM in enhancing productivity and also determines the level of knowledge and awareness of BIM by industry players and stakeholders as well as establishing the extent of usage of BIM in the Ghanaian construction industry. A descriptive survey research was conducted with both structured and unstructured questionnaire and administered both via e-mail and by sending questionnaire link onto a WhatsApp platform groups of the respondents and out of the 263 respondents that took part in the survey, 78 respondents feedback were incomplete so 185 member respondents results were analyzed in the form of bar charts, column chart and pie chart representing 70.3% response rate. The research survey respondents comprised of Civil Engineers, Construction Project Managers, Architects, Electrical Engineers, Quantity Surveyors, Mechanical Engineers, Contractors and Facility Managers. The survey results revealed that there is a low level of knowledge of Building Information Modeling (BIM) and its concept in the Ghanaian Construction Industry which is also associated with the low level of awareness, utilization and adoption among stakeholders. BIM therefore represents a new paradigm within AEC that encourages integration of the roles of all stakeholders on the effective execution of projects and therefore edge the participation of relevant professional bodies to facilitate its implementation in order to ensure adequate knowledge of BIM towards improving productivity and efficiency in the Construction Industry.
VL  - 5
IS  - 6
ER  -

Copy | Download