Experimental Study of Free Convection Inside Curvy Surfaces Porous Cavity
Engineering Science
Volume 2, Issue 4, December 2017, Pages: 85-92
Received: Apr. 17, 2017; Accepted: Apr. 27, 2017; Published: Aug. 1, 2017
Views 2436      Downloads 413
Ali Maseer Gati'a, Mechanical Department, Engineering College, Wasitt University, Wasit, Iraq
Zena Khalifa Kadhim, Mechanical Department, Engineering College, Wasitt University, Wasit, Iraq
Ahmad Kadhim Al-Shara, Mechanical Department, Engineering College, Wasitt University, Wasit, Iraq
Article Tools
Follow on us
An experimental investigation is performed in the present study to identify how can the porous medium behave inside a closed curvy porous cavity heated from below and compare the obtained results with the same numerical simulation model. The numerical model is simulated by ANSYS-CFX R15.0 under Darcy-Forchheimer model with neglecting the viscous dissipation. The work contains also measuring experimentally the permeability of the sand-silica which represents the solid matrix of the porous medium by using a special device made locally. The isotherms form and the temperature distribution on the interior sides of the walls are what explored in this experimental work. The final result leads to an acceptable convergence between these two models (numerical and experimental models). Also, the work gives a proof of the legality of Kozeny-Karman equation to estimate the permeability of the porous medium mathematically.
Free Convection, Curvy Cavity, Porous Medium, Sand-Silica, Teflon, Darcy-Forchheimer Model
To cite this article
Ali Maseer Gati'a, Zena Khalifa Kadhim, Ahmad Kadhim Al-Shara, Experimental Study of Free Convection Inside Curvy Surfaces Porous Cavity, Engineering Science. Vol. 2, No. 4, 2017, pp. 85-92. doi: 10.11648/j.es.20170204.11
Copyright © 2017 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Ali Maseer Gati'a, Zena Khalifa Kadhim, and Ahmad Kadhim Al-Shara.'Numerical Study of Laminar Free Convection HT Inside a Curvy Porous Cavity Heated From Below'. Engineering Science journals. Vol. 2, Issue 2, April 2017.
Zoltan E. HEINEMANN. 'Fluid Flow in Porous Media'. Textbook series, Volume 1, DI Barbara Schatz, October 2005.
EUROSOIL, which is a member of IMA-Europe, the European Industrial Minerals Association, was founded in May 1991 as the official body representing the European industrial silica producers.
Manmath N. Panda, and Larry W. Lake. 'Estimation of single-phase permeability from parameters of particle-size distribution'. AAPG Bull 1994; 78: 1028–39.
Epstein, N. (1989), On tortuosity and the tortuosity factor in flow and diffusion through porous media, Chem. Eng. Sci., 44(3), 777– 779.
ASHRAE Handbook - Heating, Ventilating, and Air-Conditioning Systems and Equipment (I-P Edition) American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., 2008, Electronic ISBN 978-1-60119-795-5, table 2 page 15. 3.
Hydrosight. "Acrylic vs. Polycarbonate: A quantitative and qualitative comparison" (http://www.hydrosight.com/acrylic-vs-polycarbonate-a-quantitative-and-qualitative-comparison).
The free encyclopedia Wikipedia.
Teflon™| Chemours Teflon™ Nonstick Coatings and Additives. www.chemours.com. Retrieved 2016-03-01. (https://www.chemours.com/Teflon/en_US)
George S. Kell. 'Density, thermal expansivity, and compressibility of liquid water from 0 to 150 C: correlations and tables for atmospheric pressure and saturated reviewed and expressed on 1968 temperature scale'. journal of chemical and engineering data, Vol. 20, No. 1, 1975.
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
Tel: (001)347-983-5186