Volume 4, Issue 1, March 2019, Pages: 1-11
Received: Nov. 23, 2018;
Accepted: Dec. 17, 2018;
Published: Jan. 31, 2019
Views 708 Downloads 358
Jamilu Ya’u Muhammad, Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Mohammed Tajudeen Jimoh, Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Ibrahim Baba Kyari, Department of Electrical and Electronics Engineering, Usman Danfodiyo University, Sokoto, Nigeria
Mohammed Abdullahi Gele, Sokoto Energy Research Centre, Services Unit, Sokoto, Nigeria
Ibrahim Musa, Department of Agricultural and Bio-Environmental Engineering, College of Agriculture, Zuru, Nigeria
The renewable energy is a source of energy that does not deplete with time, because of this most of the research focused on this source of energy. Solar energy is among the renewable energy that is free in nature and clean from pollution, but harnessing this energy has limitation due to some environmental conditions. To solve this problem, solar tracking is used. This paper intended to review different solar tracking system that increases the solar power output. The result revealed the solar system with tracking is more efficient compared to that fixed solar system. Furthermore, dual axis tracking system is also more efficient than single axis tracking system due to the fact that dual axis tracking system have ability to track the solar irradiant on both axes. Finally, it is not recommended to use solar trackers with small PV arrays because of the energy consumption of the driving systems, which vary from 2% to 3% of the energy increase delivered by the solar trackers.
Jamilu Ya’u Muhammad,
Mohammed Tajudeen Jimoh,
Ibrahim Baba Kyari,
Mohammed Abdullahi Gele,
A Review on Solar Tracking System: A Technique of Solar Power Output Enhancement, Engineering Science.
Vol. 4, No. 1,
2019, pp. 1-11.
M. Serhan and L. El-Chaar (2010): Two axes Sun Tracking System: Comparison with a fixed system. International Conference on Renewable Energies and Power Quality, at Granada Spain on 23-25 March, 2010.
Goetzberger, A., Hebling, C., Schock, H. (2002). Photovoltaic materials, history, status and outlook. Materials Science and Engineering: R: Reports.
Otieno O. R (2015). Solar tracker for solar panel. (Unpublished Project). University of Nairobi, Kenya.
Mousazadeh, H., Keyhani, A., Javadi, A., Mobli, H., Abrinia, K., Sharifi, A. (2009). A review of principle and sun-tracking methods for maximizing solar systems output. Renewable and Sustainable Energy Reviews, volume13, pp: 1800–1818.
Saxena A. K and Dutta V. (1990). A versatile microprocessor based controller solar tracking. Proc. IEEE. : 1105-1109.
Adrian C., Mario C. (2010): Azimuth-Altitude Dual Axis Solar Tracker. B. Sc. Project at Worcester Polytechnic Institute.
Antonio L. Luque, Viacheslav M. A. (2007): Concentrator Photovoltaic. Springer Verlag.
David Cooke (2011): Single vs. Dual Axis Solar Tracking, Alternate Energy eMagazine.
Muhammad S. B. (2013): Determining the Accuracy of Solar Tracker. M. Sc. Thesis at Department of Technology and Environmental Design, Appalachian State University.
Rockwell Automation (2009): Solar tracking application [White Paper]. Marion, N C: Rockwell Automation. http://literature.rockwellautomation.com/idc/groups/literature/documents/wp/oem-wp009_-en-p.pdf
Poulek, V. (1994): Testing the New Solar Tracker with Shape Memory Alloy Actors. Proceedings of the Conference Record of the IEEE Photovoltaic Specialists Conference, Waikoloa, pp: 1131-1133.
Clifford, M. J. and Eastwood, D. (2004). Design of a Novel Passive Solar Tracker. Solar Energy, volume 77, pp: 269-280.
Mwithiga G. and Kigo S. N (2006). Performance of a solar dryer with limited sun tracking capability. Journal of Food Engineering; 74:247–52.
Castaneda, C. E. F. (2011). Desenvolvimento de um rastreador solar passive por transferencia de massa. Prodetec-Programa de Pos-Graduacao de Desenvolvimento Tecnologico.
Kalogirou, S. A. (1996). Design and construction of a one-axis sun-tracking system. Solar Energy. (57): 465-469.
Ibrahim S. M. A. (1996). The forced circulation performance of a sun tracking parabolic concentrator collector. Retrieved from http://cat.inist.fr/
Khalid I. Tanvir I, Chowdhury M, and Ahmad I. (2005). Construction of Single Axis Automatic Solar Tracking System. International Journal of Science and Technology. 8(1): 389-400.
Nowshad Amin, Wong Chin Yung and Kamaruzzaman Sopian (2008): Low Cost Single Axis Automated Sunlight Tracker Design for Higher PV Power Yield, ISESCO Science and Technology Vision- Volume 4, pp: 6-9.
Ravi T and Chetan S. S (2010). 360° Sun Tracking with Automated Cleaning System for Solar PV Modules. IEEE, 2010.
Ponniran A., Hashim A. and Munir H. A (2011). A Design of Single Axis Sun Tracking System. 5th International Power Engineering and Optimization Conference (PEOCO 2011), Shah Alam, Selangor, Malaysia: 6-7.
Mostefa Ghassoul (2013): Design of an Automatic Solar Tracking System to Maximize Energy Extraction. International Journal of Emerging Technology and Advanced Engineering. 3(5).
Kamala J, Alex Joseph (2014): Solar Tracking for Maximum and Economic Energy Harvesting, International Journal of Engineering and Technology (IJET). Volume 5, No. 6, pp: 5030-5037.
Rohit Agarwal (2014). Concept of Mechanical Solar Tracking System. International Conference on Advances in Engineering & Technology (ICAET-2014). pp: 24-27. Available at: www.iosrjournals.org
Agarwal, A. K. (1992). Two axis tracking system for solar concentrators. Renewable Energy, (2): 181-182.
Mumba J. (1995). Development of a photovoltaic powered forced circulation grain dryer for use in the tropics. Renewable Energy: 6(7): 855–62.
Park Y. C and Kang Y. C (2001). Design and Implementation of two-axes Sun Tracking System for the Parabolic Dish. ISES, Solar World Congress, pp: 748-760.
Urbano, J. A., Matsumoto Y. and Asomoxa R. (2003). 5Wp PV module-based stand-alone solar tracking system. In Proceedings of 3rd World Conference on Photovoltaic Energy Conversion, Osaka, Japan.
Abdallah, S. and Nijmeh, S. (2004). Two axes sun tracking system with PLC control. Energy Conversion Management. (45): 1931-1939.
E. Abdallah, M. Al-Soud, A. Akayleh and S. Abdallah (2010). Cylindrical Solar Cooker with Automatic Two axes Sun Tracking System. Jordan Journal of Mechanical and Industrial Engineering. 4(4): 477-486.
M. R. I. Sarker, Md. Riaz Pervez, R. A. Beg (2010): Design, Fabrication and Experimental Study of a Novel Two-Axis Sun Tracker, International Journal of Mechanical and Mechatronics Engineering IJMME-IJENS, 10(1).
Yogesh R. S and N. N Suraskar (2012). Design and Fabrication of Manually Track Parabolic Solar Disc for In-house Cooking. International Journal of Modern Engineering Research. 2(6).
S. K. Ray, Md. Abu Bashar, M. Ahmad and F. Sayed (2012). Two Ways of Rotating Freedom Solar Tracker by Using ADC of Microcontroller. Global Journal of Researches in Engineering; 12 (4).
M. Bortolini, M. Gamberi, A. Graziani, M. Manfroni and R. Manzini (2012). Hybrid Strategy for Bi-axial Solar Tracking System. Journal of Control Engineering and Technology. 2(4).
Mostafa Mehrtash, Guillermo Quesada, Y van Dutil, Daniel Rouse (2012): Performance Evaluation of Sun Tracking Photovoltaic Systems in Canada, 20th Annual International Conference on Mechanical Engineering- ISME 2012, at School of Mechanical Eng., Shiraz University, Shiraz, Iran.
Shrishti R. (2013). A Study on Automatic Dual Axis Solar Tracker system Using 555 Timer. International Journal of Research and Application; 1(4): 77-85.
Xiaoshan Jin, Guoqiang Xu, Rongjiu Zhou, Xiang Luo, Yongkai Quan (2013). A Sun Tracking System Design for a Large Dish Solar Concentrator. International Journal of Clean Coal and Energy, 2, pp: 16-20. Published Online at http://www.scirp.org/journal/ijcce
Summer Lo, Fritz Cheng, Vincent Chang, William Der-Jenq Liu, Leo Chang, Ojo F. Adurodija, Erh Nan Chou, Curtis Lung, Jeff Liu, Tim Lu, Jeffery Su, Eve Cheng (2015): Design, operation and performance evaluation of a cable-drawn dual-axis solar tracker compared to a fixed-tilted system, Energy Science and Engineering, 3(6), pp: 549–557.
Tsung Chieh Cheng, Chao Kai Yang and I. Lin (2016). Biaxial-Type Concentrated Solar Tracking System with a Fresnel Lens for Solar-Thermal Applications. Applied Sciences. 115 (6). Retrieved from www.mdpi.com/journal/applsci
Ali Ozturk, Selman Alkan, Ugur Hasirci, Salih Tosun (2016): Experimental performance comparison of a 2-axis sun tracking system with fixed system under the climatic conditions of Duzce, Turkey, Turkish Journal of Electrical Engineering & Computer Sciences, volume 23, pp: 4383-4390.
Oh, S. J., Hyun, J. H., Lee, Y. J., Chen, K., Choon, N. K., Lee, Y. S., Chun, W. (2009). A study on the development of high accuracy solar tracking systems. 8th International Conference on Sustainable Energy Technologies, Aachen, Germany. Retrieved from http://www.slideshare.net/iskandaruz/a-study-on-the-development-of-high-accuracy-solar-tracking-systems
Patil, J. V., Nayak, J. K., Sundersingh, V. P. (1997). Design, fabrication and preliminary testing of a two-axis solar tracking system. RERIC International Energy Journal, 19(1), 15-23.
P. Madhu & V. Viswanadha (2015). Design of Real Time Embedded Solar Tracking System. International Journal of Emerging Trends in Engineering Research (IJETER), Vol. 3, No. 6, pp: 180-185.
M. Yilmaz & F. Kentli (2015). Increasing of Electrical Energy with Solar Tracking System at the Region which has Turkey’s Most Solar Energy Potential. Journal of Clean Energy Technologies, Vol. 3, No. 4. Pp:287-290.