Studies on the Effective Physical Parameters for Chirp Reduction in Optical Injection Locked Semiconductor Lasers
American Journal of Physics and Applications
Volume 2, Issue 2, March 2014, Pages: 56-60
Received: Mar. 5, 2014;
Published: Mar. 30, 2014
Views 2968 Downloads 105
S. N. Hosseinimotlagh, Department of Physics, Colleges of Sciences, Islamic Azad University of Shiraz, Shiraz, Iran
M. Nikravesh, Department of Physics, Science and Research Branch,Islamic Azad University,Fars,Iran
H. Molaei, Department of Physics, Payam Noor University, Shiraz, Iran
M. Pezeshkian, Department of Physics, Payam Noor University, Shiraz, Iran
Follow on us
In optical injection locking, the light from one laser (master laser)is injected into another laser slave laser. The injected light causes changes in the slave laser characteristics, and it can lock the slave laser lasing frequency to the ML lasingfrequency. The locking characteristics are determined by theamount of injected power and thefrequency difference between the master laser and slave laser.In this paper, the chirp of injection-locked semiconductor lasers has been theoretically investigated. First, chirpcharacteristics of semiconductor lasers are described. The chirp to power ratio has been calculated with including opticalinjection effect in lasers rate equation. Then, the effects of phase difference between master and slave laser and modulation frequency on chirp to power ratio are evaluated. The results of calculations show that the effect of phasedifference can be neglected, but optical injection, line width enhancement factor, and detuningfrequency have an effective role in chirp reduction of semiconductor lasers.
Injection-Locked, Chirp, Semiconductor Lasers
To cite this article
S. N. Hosseinimotlagh,
Studies on the Effective Physical Parameters for Chirp Reduction in Optical Injection Locked Semiconductor Lasers, American Journal of Physics and Applications.
Vol. 2, No. 2,
2014, pp. 56-60.
J. M. Liu, H. F. Chen, X. J. Meng, and T. B. Simpson, “Modulation bandwidth, noise, and stability of a semiconductor laser subject to strong injection locking,” IEEE Photon. Technol. Lett., vol. 9, pp. 1325–1327,Oct. 1997.
V. Annovazzi-Lodi, A. Scire, M. Sorel, and S. Donati, “Dynamic behavior and locking of a semiconductor laser subjected to external injection,” IEEE J. Quantum Electron., vol. 34, pp. 2350–2357, Dec. 1998.
X. Meng, T. Chau, and M. C. Wu, “Experimental demonstration of modulation bandwidth enhancement in distributed feedback lasers with external light injection,” Electron. Lett., vol. 34, pp. 2031–2032, Oct. 1998.
W. E. Lamb, ‘‘Theory of an optical maser,’’ Phys. Rev., 134(6A), 1429–1450, 1964.
R. Lang, ‘‘Injection locking properties of a semiconductor laser,’’ IEEE J. Quantum Electron., QE-18,976–83, 1982.
A. Murakami, K. Kawashima, and K. Atsuki, ‘‘Cavity resonance shift and bandwidth enhancement insemiconductor lasers with strong light injection,’’ IEEE J. Quantum Electron.39, 1196–204, 2003.
T. L. Koch, &J. E.Bowers, Nature of wavelength chirping in directly modulated semiconductorlasers. Electron.Lett. 20, 1038-1040, 1984
F.Koyama, &Y.Suematsu, Analysis of dynamic spectral width of dynamic-single-mode (DSM)lasers and related transmission bandwidth of single-mode fibers. IEEE J. Quantum Electron. QE-21, 292-297, 1985
R. A. Linke, Modulation induced transient chirping in single frequency lasers. IEEE J. QuantumElectron. QE-21, 593-597, 1985
T. L. Koch and R. A. Linke, “Effect of nonlinear gain reduction on semiconductor laser wavelengthchirping” Appl. Phys. Lett. 48, 613-615, 1986
R. S. Tucker, "High-speed modulation of semiconductor lasers," J. Lightwave Technol. 3, 1180-1192,1985.