Thermal Performance of Electrocaloric Refrigeration using Thermal Switches of Fluid Motion and Changing Contact Conductance
American Journal of Physics and Applications
Volume 4, Issue 5, September 2016, Pages: 134-139
Received: Sep. 19, 2016;
Published: Sep. 19, 2016
Views 3731 Downloads 156
Shigeki Hirasawa, Department of Mechanical Engineering, Kobe University, Kobe, Japan
Tsuyoshi Kawanami, Department of Mechanical Engineering, Kobe University, Kobe, Japan
Katsuaki Shirai, Department of Mechanical Engineering, Kobe University, Kobe, Japan
Thermal performance of electrocaloric refrigeration system composed with a thin electrocaloric material and thermal switches was numerically calculated. Two types of thermal switches were studied: a thermal switch of fluid motion and a thermal switch by changing the contact thermal conductance. The following results were obtained. For the thermal switch of fluid motion with the frequency 10 Hz, the thicknesses of the electrocaloric material 200 μm and the water flow channel 100 μm, the average heat transfer efficiency was 11%. For the thermal switch by changing contact thermal conductance with the frequency 1000 Hz, the thicknesses of the electrocaloric material 20 μm and the heat storage material 20 μm, the average heat transfer efficiency was 6% and the average heat flux transferred to the cold side of the system was 7 x 104 W/m2.
Thermal Performance of Electrocaloric Refrigeration using Thermal Switches of Fluid Motion and Changing Contact Conductance, American Journal of Physics and Applications.
Vol. 4, No. 5,
2016, pp. 134-139.
R. Radebaugh, W. N. Lawless, J. D. Siegwarth, A. J. Morrow, "Feasibility of Electrocaloric Refrigeration for the 4-15 K Temperature Range, Cryogenics," vol. 19, 1979, pp. 187-208.
R. I. Epstein, K. J. Malloy, "Electrocaloric Devices Based on Thin-Film Heat Switches," Journal of Applied Physics, vol. 106, 064509, 2009.
Y. Jia, Y. S. Ju, "A Solid-State Refrigerator Based on the Electrocaloric Effect," Applied Physics Letters, vol. 100, 242901, 2012.
W. Sato, "A Study of a New Cooling Device Based on the Electrocaloric Effect," Proc. of the ASME 2013 International Mechanical Engineering Congress, San Diego, IMECE2013-62258, 2013.
D. Guo, J. B. Gao, Y. J. Yu, S. Santhanam, A. Slippey, G. K. Fedder, A. J. H. McGaughey, S.C. Yao, "Design and Modeling of a Fluid-Based Micro-Scale Electrocaloric Refrigeration System," International Journal of Heat and Mass Transfer, vol. 72, 2014, pp. 559-564.
M. Ozbolt, A. Kitanovski, J. Tusek, A. Poredos, "Electrocaloric Refrigeration: Thermodynamics, State of the Art and Future Perspectives," International Journal of Refrigeration, vol. 40, 2014, pp. 174-188.
S. Hirasawa, T. Nakamu, T. Kawanami, K. Shirai, "Study on Unsteady Thermal-Switching Function of Flat Heat Pipe," Proc. of the ASME 2015 International Mechanical Engineering Congress & Exposition, 2015, Houston, IMECE2015-50158, 2015.
S. Hirasawa, S. Fujimoto, T. Nakamu, T. Kawanami, K. Shirai, "Experiment on Heat Transfer Control by Changing Contact Thermal Resistance," Proc. of the JSME 2014 Mechanical Engineering Congress, Tokyo, G0610101, 2014 (in Japanese).
S. Hirasawa, T. Kawanami, K. Shirai, "Efficient Cooling System using Electrocaloric Effect," Journal of Electronics Cooling and Thermal Control, vol. 6, 2016, pp. 78-87.
Y. He, "Heat Capacity, Thermal Conductivity, and Thermal Expansion of Barium Titanate-Based Ceramics," Thermochimica Acta, vol. 419, 2004, pp. 135–141.
J. P. Holman, Heat Transfer, 9th Ed., McGraw-Hill International Book Co., Boston, 2002.
G. Zhang, Q. Li, H. Gu, S. Jiang, K. Han, M. R. Gadinski, M. A. Haque, Q. Zhang, Q. Wang, "Ferroelectric Polymer Nanocomposites for Room-Temperature Electrocaloric Refrigeration," Advance Material, vol. 27, 2015, pp. 1450-1454.