Recycling and Reuse of Waste ABS Resin

Liao Yangke; Xu Haiping; Xu Shihao; Zhang Tongshan; Zhu Min

doi:doi:

| Peer-Reviewed

Recycling and Reuse of Waste ABS Resin

Liao Yangke, Xu Haiping, Xu Shihao, Zhang Tongshan, Zhu Min

Published in Asia-Pacific Journal of Environmental Science and Engineering (Volume 2, Issue 1)

Received: 9 January 2020 Accepted: 29 April 2020 Published: 17 July 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Plastic is a kind of material with low density and excellent performance, and acrylonitrile-butadiene-styrene (ABS) is used in areas such as electronic products, automobiles, textiles and buildings as it is easy to process and tough. But the structure of ABS makes it easily get aged as a result of environment impacts like ultraviolet rays and oxidation, leading to the loss of appearance and physical perfomance, and ABS products are suffering from this. In this article, some study about the aging ways and the recycling and reusing solutions of ABS are summarized, from this and the status of Chinese plastic reuse industry, a developing direction is raised.

Published in	Asia-Pacific Journal of Environmental Science and Engineering (Volume 2, Issue 1)
Page(s)	1-6
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Acrylonitrile-butadiene-styrene, Recycling, Modification

References

[1]	王圣涵.浅析能源危机的产生与解决策略[J].科技经济导刊，2018,26(27):109-110.
[2]	陈岩,焦强国.“禁废令”对塑料再生行业的影响[J].中国石油和化工经济分析，2019(04):35-38.
[3]	舆情调查“禁废令”倒逼中国塑料再生企业转型升级[J].中国石油和化工经济分析，2019(04):41.
[4]	唐赛珍.我国塑料废弃物资源化现状及前景[J].新材料产业，2011(10):62-67.
[5]	宋振彪,谢洪涛,梁皓月,胡慧林,郝刚,赵雪悠.影响ABS树脂韧性的因素[J].上海塑料，2018(04):40-46.
[6]	黄立本,张立基,赵旭涛.ABS树脂及其应用[M].北京:化学工业出版社，2001.1-2.
[7]	柯敏静.中国废弃塑料回收和再生之市场研究(上)[J].塑料包装，2018,28(03):24-28.
[8]	Santos RM, Botelho G, Cramez MC, et al. Outdoor and accelerated weathering of acrylonitrile-butadiene-styrene: A correlation study [J]. Polymer Degradation and Stability. 2013, 98 (10): 2111-2115.
[9]	Blom, H. Detection of Degradation of ABS materials via DSC [J], Thermochimica Acta, 2016: 627-629.
[10]	Bociąga, E. Influence of ageing on the gloss, color, and structure of colored ABS, Color Research and Application [J]. 2016, 41 (4): 392-398.
[11]	沈利达. ABS耐候性能的研究及分析[J].化工设计通讯，2018, 44(05):83.
[12]	王星晖,王燕枫.室外环境ABS材料制件的老化研究[J].化学推进剂与高分子材料，2018,16(06):82-85.
[13]	邓俊杰. ABS耐候性能研究[J].汽车零部件，2017(12):75-77.
[14]	张程程,闫晶. ABS改性及其耐候性能研究[J].黑龙江科学，2019,10(12):40-41.
[15]	刘红莎.基于近红外光谱的废混合塑料识别研究[D].天津南开:天津大学，2013:45-50.
[16]	吴贵青.废旧塑料颗粒摩擦静电分选[D].上海徐汇:上海交通大学，2013:30-34.
[17]	Teresa Carvalho, Fernando Durão, Célia Ferreira. Separation of packaging plastics by froth flotation in a continuous pilot plant [J]. Waste Management, 2010: 30-40.
[18]	李建波.浮选法分离废弃ABS/HIPS工艺研究与改进[D]. 山西太原:中北大学，2018:60-66.
[19]	温勇,杜建伟,项赟,雷伟香. 废旧塑料再生造粒清洁生产的潜力分析与途径探讨[J]. 环境保护，2013(21):53-54.
[20]	周海.通用ABS电镀性能研究[J].中国化工贸易，2014,(1):263-266.
[21]	S. Shylin H. Jose, S. Pavendhiran, R. A. Sankaran. A review on waste printed circuit board recycling technique [J]. Pollution Research, 2015, 34 (2): 433-438.
[22]	熊维,吴泽兵,朱宽.一种回收废旧塑料工艺体系. CN 2018115529213, 2018.12.19.
[23]	楚莹莹.电解法从废旧印刷线路板中回收金属铜的技术开发[D].四川绵阳:西南科技大学，2016:54-58.
[24]	陆书来,张春军,朱学多,杨帆,李军.ABS电镀工艺及其常见问题分析[J].弹性体，2013,23(03):59-62.
[25]	罗春燕.废ABS电镀件退镀及退镀液回收再生工艺研究[D]. 江西南昌:南昌大学，2015:56-60.
[26]	饶荣.氯化退镀-电解回收废弃ABS塑料电镀件的工艺研究[D].江西南昌:南昌大学，2014:30-34.
[27]	李燕.废旧电脑中ABS塑料的回收再利用技术研究[D].黑龙江哈尔滨:哈尔滨工业大学，2008:42-46.
[28]	王嘉.废旧电器外壳用ABS塑料的回收利用[D]. 山西太原:中北大学，2015:83-87.
[29]	吴晓露.基于老化降解机理的废弃ABS、HIPS改性研究[D].山西太原:中北大学，2018:67-73.
[30]	明建入,杨啸,彭晨,王琪,张良均.TPU及TPU-g-MAH增韧废弃ABS的研究[J].广东化工，2015(16):38-39.
[31]	陈森.电子废弃物壳体塑料应用技术研究[D].四川成都:西南交通大学，2014:53-58.
[32]	Singh Rupinder, Singh Inderpreet, Kumar Ranvijay. Mechanical and morphological investigations of 3D printed recycled ABS reinforced with bakelite–SiC–Al₂O₃ [J]. Proceedings of the Institution of Mechanical Engineers, 2019: 233-250.
[33]	Charles, A., Bassan, P. M., Mueller, T., Elkaseer, A., Scholz, S. G. On the assessment of thermo-mechanical degradability of multi-recycled ABS polymer for 3D printing applications Smart Innovation [J]. Systems and Technologies, 2019: 363-373.

Cite This Article

Plain Text BibTeX RIS

APA Style

Liao Yangke, Xu Haiping, Xu Shihao, Zhang Tongshan, Zhu Min. (2020). Recycling and Reuse of Waste ABS Resin. Asia-Pacific Journal of Environmental Science and Engineering, 2(1), 1-6.

Copy | Download

ACS Style

Liao Yangke; Xu Haiping; Xu Shihao; Zhang Tongshan; Zhu Min. Recycling and Reuse of Waste ABS Resin. Asia-Pac. J. Environ. Sci. Eng. 2020, 2(1), 1-6.

Copy | Download

AMA Style

Liao Yangke, Xu Haiping, Xu Shihao, Zhang Tongshan, Zhu Min. Recycling and Reuse of Waste ABS Resin. Asia-Pac J Environ Sci Eng. 2020;2(1):1-6.

Copy | Download

@article{10046090,
  author = {Liao Yangke and Xu Haiping and Xu Shihao and Zhang Tongshan and Zhu Min},
  title = {Recycling and Reuse of Waste ABS Resin},
  journal = {Asia-Pacific Journal of Environmental Science and Engineering},
  volume = {2},
  number = {1},
  pages = {1-6},
  url = {https://www.sciencepublishinggroup.com/article/10046090},
  abstract = {Plastic is a kind of material with low density and excellent performance, and acrylonitrile-butadiene-styrene (ABS) is used in areas such as electronic products, automobiles, textiles and buildings as it is easy to process and tough. But the structure of ABS makes it easily get aged as a result of environment impacts like ultraviolet rays and oxidation, leading to the loss of appearance and physical perfomance, and ABS products are suffering from this. In this article, some study about the aging ways and the recycling and reusing solutions of ABS are summarized, from this and the status of Chinese plastic reuse industry, a developing direction is raised.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Recycling and Reuse of Waste ABS Resin
AU  - Liao Yangke
AU  - Xu Haiping
AU  - Xu Shihao
AU  - Zhang Tongshan
AU  - Zhu Min
Y1  - 2020/07/17
PY  - 2020
T2  - Asia-Pacific Journal of Environmental Science and Engineering
JF  - Asia-Pacific Journal of Environmental Science and Engineering
JO  - Asia-Pacific Journal of Environmental Science and Engineering
SP  - 1
EP  - 6
PB  - Science Publishing Group
UR  - http://www.sciencepg.com/article/10046090
AB  - Plastic is a kind of material with low density and excellent performance, and acrylonitrile-butadiene-styrene (ABS) is used in areas such as electronic products, automobiles, textiles and buildings as it is easy to process and tough. But the structure of ABS makes it easily get aged as a result of environment impacts like ultraviolet rays and oxidation, leading to the loss of appearance and physical perfomance, and ABS products are suffering from this. In this article, some study about the aging ways and the recycling and reusing solutions of ABS are summarized, from this and the status of Chinese plastic reuse industry, a developing direction is raised.
VL  - 2
IS  - 1
ER  -

Copy | Download

Author Information

Liao Yangke

School of Environment and Materials Engineering, Shanghai Polytechnic University, Shanghai, China
Xu Haiping

School of Environment and Materials Engineering, Shanghai Polytechnic University, Shanghai, China
Xu Shihao

School of Environment and Materials Engineering, Shanghai Polytechnic University, Shanghai, China
Zhang Tongshan

School of Environment and Materials Engineering, Shanghai Polytechnic University, Shanghai, China
Zhu Min

School of Environment and Materials Engineering, Shanghai Polytechnic University, Shanghai, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Liao Yangke, Xu Haiping, Xu Shihao, Zhang Tongshan, Zhu Min. (2020). Recycling and Reuse of Waste ABS Resin. Asia-Pacific Journal of Environmental Science and Engineering, 2(1), 1-6.

Copy | Download

ACS Style

Liao Yangke; Xu Haiping; Xu Shihao; Zhang Tongshan; Zhu Min. Recycling and Reuse of Waste ABS Resin. Asia-Pac. J. Environ. Sci. Eng. 2020, 2(1), 1-6.

Copy | Download

AMA Style

Liao Yangke, Xu Haiping, Xu Shihao, Zhang Tongshan, Zhu Min. Recycling and Reuse of Waste ABS Resin. Asia-Pac J Environ Sci Eng. 2020;2(1):1-6.

Copy | Download

@article{10046090,
  author = {Liao Yangke and Xu Haiping and Xu Shihao and Zhang Tongshan and Zhu Min},
  title = {Recycling and Reuse of Waste ABS Resin},
  journal = {Asia-Pacific Journal of Environmental Science and Engineering},
  volume = {2},
  number = {1},
  pages = {1-6},
  url = {https://www.sciencepublishinggroup.com/article/10046090},
  abstract = {Plastic is a kind of material with low density and excellent performance, and acrylonitrile-butadiene-styrene (ABS) is used in areas such as electronic products, automobiles, textiles and buildings as it is easy to process and tough. But the structure of ABS makes it easily get aged as a result of environment impacts like ultraviolet rays and oxidation, leading to the loss of appearance and physical perfomance, and ABS products are suffering from this. In this article, some study about the aging ways and the recycling and reusing solutions of ABS are summarized, from this and the status of Chinese plastic reuse industry, a developing direction is raised.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Recycling and Reuse of Waste ABS Resin
AU  - Liao Yangke
AU  - Xu Haiping
AU  - Xu Shihao
AU  - Zhang Tongshan
AU  - Zhu Min
Y1  - 2020/07/17
PY  - 2020
T2  - Asia-Pacific Journal of Environmental Science and Engineering
JF  - Asia-Pacific Journal of Environmental Science and Engineering
JO  - Asia-Pacific Journal of Environmental Science and Engineering
SP  - 1
EP  - 6
PB  - Science Publishing Group
UR  - http://www.sciencepg.com/article/10046090
AB  - Plastic is a kind of material with low density and excellent performance, and acrylonitrile-butadiene-styrene (ABS) is used in areas such as electronic products, automobiles, textiles and buildings as it is easy to process and tough. But the structure of ABS makes it easily get aged as a result of environment impacts like ultraviolet rays and oxidation, leading to the loss of appearance and physical perfomance, and ABS products are suffering from this. In this article, some study about the aging ways and the recycling and reusing solutions of ABS are summarized, from this and the status of Chinese plastic reuse industry, a developing direction is raised.
VL  - 2
IS  - 1
ER  -

Copy | Download