Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture

Xu Nianfu; Gao Mei; Weng Xiuqi

doi:doi:

| Peer-Reviewed

Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture

Xu Nianfu, Gao Mei, Weng Xiuqi

Published in Asia-Pacific Journal of Energy and Power Engineering (Volume 1, Issue 1)

Received: 6 June 2019 Accepted: 10 July 2019 Published: 26 July 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Connecting board parts are mainly used in all kinds of containers to fix all kinds of containers, cargo and so on. Whether the fixed objects are reliable and the operation is convenient directly affects the working efficiency of connecting board. The connecting board is supported on the axle and the two panels are perpendicular to 90 degrees. When processing, the technical requirements of drawing must be met in order to achieve the use effect. Therefore, the connecting board should be mechanically added reasonably. Only by analyzing the process and designing the appropriate fixture for mechanical processing can the better performance be brought into play.

Published in	Asia-Pacific Journal of Energy and Power Engineering (Volume 1, Issue 1)
Page(s)	5-7
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Connecting Plate, Process Analysis, Clamp, Design

References

[1]	顾其俊.发电机轴支撑架工装设计及加工工艺优化分析[J]. 机床与液压, 2018.5:137-140。
[2]	徐年富.支架零件机械加工工艺分析与底面铣削夹具设计[J].煤矿机械, 2015,3:153-154。
[3]	陈宏钧，机械加工工艺方案设计及案例[M]，北京：机械工业出版社，2011.01。
[4]	王凡、宋建新,实用机械制造工艺设计手册[M]，北京：机械工业出版社，2008.5。
[5]	王道林，机械制造工艺[M]，北京：机械工业出版社，2017.7。
[6]	盖永亮.航空摇臂类零件的加工工艺研究[J].新技术新工艺, 2017(11):12-15。
[7]	刘鑫.牵引车尾梁连接板加工工艺研究[J].汽车实用技术, 2013(12):90-92。
[8]	徐年富等.对开螺母的机械加工工艺分析与镗孔夹具设计[J].煤矿机械,2018,2(2):76-77。
[9]	陈宏均.典型零件机械加工生产实例[M].机械工业出版社，2004。
[10]	陈燕.基于不规则零件的加工工艺分析及夹具设计[J]. 机床与液压, 2011.7(14):44-45。
[11]	薛源顺.机床夹具设计[M].机械工业出版社，2011。
[12]	张燏等.一种减速器壳体的加工工艺分析与夹具设计[J].机电工程技术, 2010(3):114-116。
[13]	徐年富等.钢丝钳的机械加工工艺分析与排铣夹具设计[J].煤矿机械, 2017,7:72-73。

Cite This Article

Plain Text BibTeX RIS

APA Style

Xu Nianfu, Gao Mei, Weng Xiuqi. (2019). Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture. Asia-Pacific Journal of Energy and Power Engineering, 1(1), 5-7.

Copy | Download

ACS Style

Xu Nianfu; Gao Mei; Weng Xiuqi. Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture. Asia-Pac. J. Energy Power Eng. 2019, 1(1), 5-7.

Copy | Download

AMA Style

Xu Nianfu, Gao Mei, Weng Xiuqi. Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture. Asia-Pac J Energy Power Eng. 2019;1(1):5-7.

Copy | Download

@article{10040221,
  author = {Xu Nianfu and Gao Mei and Weng Xiuqi},
  title = {Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture},
  journal = {Asia-Pacific Journal of Energy and Power Engineering},
  volume = {1},
  number = {1},
  pages = {5-7},
  url = {https://www.sciencepublishinggroup.com/article/10040221},
  abstract = {Connecting board parts are mainly used in all kinds of containers to fix all kinds of containers, cargo and so on. Whether the fixed objects are reliable and the operation is convenient directly affects the working efficiency of connecting board. The connecting board is supported on the axle and the two panels are perpendicular to 90 degrees. When processing, the technical requirements of drawing must be met in order to achieve the use effect. Therefore, the connecting board should be mechanically added reasonably. Only by analyzing the process and designing the appropriate fixture for mechanical processing can the better performance be brought into play.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture
AU  - Xu Nianfu
AU  - Gao Mei
AU  - Weng Xiuqi
Y1  - 2019/07/26
PY  - 2019
T2  - Asia-Pacific Journal of Energy and Power Engineering
JF  - Asia-Pacific Journal of Energy and Power Engineering
JO  - Asia-Pacific Journal of Energy and Power Engineering
SP  - 5
EP  - 7
PB  - Science Publishing Group
UR  - http://www.sciencepg.com/article/10040221
AB  - Connecting board parts are mainly used in all kinds of containers to fix all kinds of containers, cargo and so on. Whether the fixed objects are reliable and the operation is convenient directly affects the working efficiency of connecting board. The connecting board is supported on the axle and the two panels are perpendicular to 90 degrees. When processing, the technical requirements of drawing must be met in order to achieve the use effect. Therefore, the connecting board should be mechanically added reasonably. Only by analyzing the process and designing the appropriate fixture for mechanical processing can the better performance be brought into play.
VL  - 1
IS  - 1
ER  -

Copy | Download

Author Information

Xu Nianfu

School of Mechanical Engineering, Nanjing Institute of Industry Technology, Nanjing, China
Gao Mei

School of Mechanical Engineering, Nanjing Institute of Industry Technology, Nanjing, China
Weng Xiuqi

School of Mechanical Engineering, Nanjing Institute of Industry Technology, Nanjing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Xu Nianfu, Gao Mei, Weng Xiuqi. (2019). Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture. Asia-Pacific Journal of Energy and Power Engineering, 1(1), 5-7.

Copy | Download

ACS Style

Xu Nianfu; Gao Mei; Weng Xiuqi. Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture. Asia-Pac. J. Energy Power Eng. 2019, 1(1), 5-7.

Copy | Download

AMA Style

Xu Nianfu, Gao Mei, Weng Xiuqi. Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture. Asia-Pac J Energy Power Eng. 2019;1(1):5-7.

Copy | Download

@article{10040221,
  author = {Xu Nianfu and Gao Mei and Weng Xiuqi},
  title = {Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture},
  journal = {Asia-Pacific Journal of Energy and Power Engineering},
  volume = {1},
  number = {1},
  pages = {5-7},
  url = {https://www.sciencepublishinggroup.com/article/10040221},
  abstract = {Connecting board parts are mainly used in all kinds of containers to fix all kinds of containers, cargo and so on. Whether the fixed objects are reliable and the operation is convenient directly affects the working efficiency of connecting board. The connecting board is supported on the axle and the two panels are perpendicular to 90 degrees. When processing, the technical requirements of drawing must be met in order to achieve the use effect. Therefore, the connecting board should be mechanically added reasonably. Only by analyzing the process and designing the appropriate fixture for mechanical processing can the better performance be brought into play.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Machining Process Analysis of Connecting Plate Parts and Design of Milling Plane Fixture
AU  - Xu Nianfu
AU  - Gao Mei
AU  - Weng Xiuqi
Y1  - 2019/07/26
PY  - 2019
T2  - Asia-Pacific Journal of Energy and Power Engineering
JF  - Asia-Pacific Journal of Energy and Power Engineering
JO  - Asia-Pacific Journal of Energy and Power Engineering
SP  - 5
EP  - 7
PB  - Science Publishing Group
UR  - http://www.sciencepg.com/article/10040221
AB  - Connecting board parts are mainly used in all kinds of containers to fix all kinds of containers, cargo and so on. Whether the fixed objects are reliable and the operation is convenient directly affects the working efficiency of connecting board. The connecting board is supported on the axle and the two panels are perpendicular to 90 degrees. When processing, the technical requirements of drawing must be met in order to achieve the use effect. Therefore, the connecting board should be mechanically added reasonably. Only by analyzing the process and designing the appropriate fixture for mechanical processing can the better performance be brought into play.
VL  - 1
IS  - 1
ER  -

Copy | Download