Peer Reviewers
Abderahhaim Samaouali
Department of Physics, Mohammed V University
Rabat, Morocco
Abhilash Karakoti
School of Mechanical Engineering, Vellore Institute of Technology
Vellore, Tamil Nadu, India
Ahmed Hammam
Department of Physics, Minia University
El Minia, Egypt
Ahmed Elamir
Optical Single Crystals Group, National Institute for Materials Science
Tsukuba, Ibaraki, Japan
Ajin Sajeevan
Kunjali Marakkar School of Marine Engineering, Cochin University of Science and Technology
Kochi, Kerala, India
Albert Wen-Jeng Hsue
Department of Mold and Die Engineering, National Kaohsiung University of Science and Technology (NKUST)
Kaohsiung, Taiwan
Aldobenedetto Zotti
Institute for Polymer, Composite and Biomaterials, Italian National Researc Council
Naples, Italy
Alemayehu Solomon Admasu
Department of Physics and Astronomy, Rutgers University
New Brunswick, New Jersey, USA
Alexey Sapozhnik
Institute of Physics, École Polytechnique Fédérale de Lausanne
Lausanne, Vaud, Switzerland
Aly Okasha
Physics Division, Spectroscopy Department, National Research Centre
Cairo, Egypt
Amirhossein Moghanian
Department of Materials Engineering, Imam Khomeini International University
Qazvin, Iran
Ana Patricia Perez Fortes
Department of Geological and Mining Engineering, Technical University of Madrid
Madrid, Spain
Andrei Surzhenkov
Department of Mechanical and Industrial Engineering, Tallinn University of Technology
Tallinn, Harjumaa, Estonia
Araa Mebdir Holi
Department of Physics, College of Education, University of Al-Qadisiyah
Al-Qadisiyah, Iraq
Arnab Kundu
Department of Mechanical Engineering, JIS College of Engineering
Kolkata, West Bengal, India
Awais Qadir
Doctoral School of Materials Science and Technologies, Obuda University
Budapest, Pest, Hungary
​National Institute for Materials Science
Tsukuba, Ibaraki, Japan
Baltej Singh
Solid State Physics Division Bhabha Atomic Research Centre
Mumbai, Maharashtra, India
Behrouz Mohammadian
Department of Mechanical, Industrial and Manufacturing Engineering, University of Toledo
Toledo,  Ohio, USA
Binod Khadka
Research Institute of Structural Engineering and Disaster Reduction, Tongji University
Shanghai, China
Biqiang Chen
State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University
Xi'an, Shaanxi, China
Carla Rubinger
Physics and Chemistry Institute, Federal University of Itajubá
Itajubá, Minas Gerais, Brazil
Chaoshuai Lei
School of Materials Science and Engineering, Beihang University
Beijing, China
Professor Chengxi Hu
Faculty of Science, Xi'an Aeronautical University
Xi'an, Shaanxi, China
Chisung Ahn
Department of Nuclear, Plasma, and Radiological Engineering, University of Illinois at Urbana-Champaign
Urbana, Illinois, USA
Crina Anastasescu
"Ilie Murgulescu" Institute of Physical Chemistry of the Romanian Academy
Bucharest, Romania
Damian Nakonieczny
Department of Biomedical Engineering, Silesian University of Technology
Zabrze, Oberschlesien, Poland
Professor David Boa
Department of Chemistry, Nangui Abrogoua University
Abidjan, Ivory Coast
Debashish Dash
Department of Electrical Engineering, National Institute Technology Silchar
Silchar, Assam, India
Dinesh Kanesan
Petroleum Engineering Department, Universiti Teknologi Petronas
Ipoh, Perak, Malaysia
Dinesh Uthra
Department of Pure and Applied Physics, G.G.V. Central University
Bilaspur, Chhattisgarh, India
Dmitriy Nesmelov
Department of Chemical Technology of High-melting Non-metallic and Silicate Materials, Saint Petersburg State Institute of Technology (Technical University)
Saint Petersburg, Russia
Department of Humanities and Science (Physics), Vardhaman College of Engineering (Auonomous)
Hyderabad, Telengana, India
Elif Demirbas
Physics and Applied Physics Department, University of Massachusetts
Lowell, Massachusetts, USA
Elzbieta Haustein
Department of Mechanics of Materials and Structures, Gdansk University of Technology
Gdansk, Poland
Emad Hussein
Department of Physics, Mustansiriyah University
Baghdad, Iraq
Esteban Araya
Center for Micro-BioRobotics @SSSA, Istituto Italiano di Tecnologia
Pontedera, Pisa, Italy
Federica Ongaro
Cnes Paris, Ensam ParisTech-PIMM Laboratory
Paris, France
Fei Tong
Department of Chemistry, University of California, Riverside
Riverside, California, USA
Fellah Mamoun
Mechanical enginneering department, Abbes Laghrour University
Khenchela, Algeria
Fernando Dal Pont Morisso
Institute of Exact and Technological Sciences, Feevale University
Novo Hamburgo, Rio Grande Do Sul, Brazil
Gabriela Maciel
Department Interdisciplinary, Federal University of Rio Grande do Sul
Tramandaí, Rio Grande Do Sul, Brazil
Geetha Seshadri
Material Science Division, Shriram Institute for Industrial Research
New Delhi, Delhi, India
Guangji Xu
School of Transportation, Southeast University
Nanjing, Jiangsu, China
Gurleen Kaur
Department of Electrical and Computer Engineering, National University of Singapore
Singapore
Hager Ali
Egyptian Petroleum Research Institute
Cairo, Egypt
Haitao Wang
China Research and Development Center, Baxter Healthcare
Shanghai, China
Hamid Reza Ghazvinloo
Department of Materials Science, Semnan University
Semnan, Iran
Hamizah Abd Samad
Mineral Research Centre, Department of Mineral and Geoscience Malaysia
Ipoh, Perak, Malaysia
Hens Saputra
Center of Technology Energy Resources and Chemical Industry, Agency for The Assessment and Application of Technology
Jakarta, Indonesia
Hu Li
School of Electrical and Electronic Engineering, University of Manchester
Manchester, UK
Hui Wang
Institute of Materials Science and Engineering, South China University of Technology
Guangzhou, Guangdong, China
Jafar Rezania
Department of Chemistry, Kharazmi University
Tehran, Iran
Janja Stergar
Faculty of Chemistry and Chemical Engineering, University of Maribor
Maribor, Slovenia
Jiajie Cen
Materials Science and Chemical Engineering, Stony Brook University
Stony Brook,  New York, USA
Jianming Bai
National Synchrotron Light Source II, Brookhaven National Laboratory
Upton, New York, USA
Jin Seok Park
Division of Electronic Engineering, Hanyang University (ERICA)
Ansan, Gyeonggi-Do, South Korea
Jinghua Li
School of Medical Technology and Engineering, Henan University of Science and Technology
Luoyang, Henan, China
Jitendra Kumar Behera
Engineering Product Development, Singapore University of Technology and Design
Singaoire, Singapore
Jixiang Zhou
Research Institute, China Singyes Solar Technologies Holdings Limited
Zhuhai, Guangdong, China
Jose Milla
Materials Research, Louisiana Transportation Research Center
Baton Rouge, Louisiana, USA
Jun Ren
Institute of Buildling Materials, China Academy of Building Research
Beijing, China
Junren Wang
Department of Chemistry, Kent State University
Kent, Ohio, USA
K.O. Low
Faculty of Engineering and Technology, Multimedia University
Melaka, Malaysia
Karima Zoghlami
Department of Geology, Faculty of Fciences of Bizerte, Carthage University
Bizerte, Tunisia
Karunagaran Natarajan
Department of Physics, Sri Sivasubramaniya Nadar College of Engineering
Chennai, Tamil Nadu, India
Keith Dusoe
Polymer Science and Engineering, University of Massachusetts Amherst
Amherst, Massachusetts, USA
Keka Chakraborty
Solid State Physics Division, Bhabha Atomic Research Center
Mumbai, Maharashtra, India
Kenza Kamli
Department of Physics, Université of 20 août 1955 Skikda
Annaba, Algeria
Kiwon Park
Department of Smart Automobile Engineering, Youngsan University
Yangsan, South Gyeongsang province, South Korea
Lei Meng
Institute of Semiconductors, Chinese Academy of Sciences
Beijing, China
Likun Duan
Chemistry Department, Iowa State University
Ames, Iowa State, USA
Linqin Mu
Department of Chemistry, Virginia Tech
Blacksburg, Virginia, USA
Linu Malakkal
Department of Mechanical Engineering, University of Saskatchewan
Saskatoon, Saskatchewan, Canada
Luca Spiridigliozzi
Department of Civil and Mechanical Engineering, University of Cassino and Southern Lazio
Roma, Lazio, Italy
Mahesh Shelar
Department of Sciencce and Humanities, Rajarambapu Institute of Technology
Uran Islampur, Maharashtra, India
Mahesh Jadhav
Department of Mechanical Engineering, Tatyasaheb Kore Institute of Engineering and Technology
Kolhapur, Maharashtra, India
Maxim Sokol
Department of Materials Science and Engineering , Drexel University
Philadelphia, Pennsylvania, USA
Md Mahbubul Bashar
Department of Textile Engineering, Mawlana Bhashani Science and Technology University
Tangail, Bangladesh
Mehmet Gokhan Sensoy
Physics Department, Middle East Technical University
Ankara, Cankaya, Turkey
Mengjia Gaowei
Collider-Accelerator Department, Brookhaven National Laboratory
Upton, New York, USA
Mirela Ilie
Optical Processes in Nanostructured Materials, National Institute of Materials Physics
Magurele, Ilfov, Romania
Moaid Hussain
Department of electronic and cmmunication Alhussain universty college Iraq
Kerbala, Alforat, Iraq
Mohammad Jellur Rahman
Department of Physics, Bangladesh University of Engineering and Technology
Dhaka, Bangladesh
Mohammad Jellur Rahman
Department of Physics, Bangladesh University of Engineering and Technology
Dhaka, Bangladesh
Mohammed Abdulrazaq
Faculty of Information Science and Engineering, Management and Science University
Shah Alam, Selangor, Malaysia
Mohammed Salih
Material Science and Engineering, Clausthal University of Technology
Clausthal -Zellerfeld, Niederscheden, Germany
Moneim Zannen
Department of Chemistry, Faculty of Sciences of Monastir
Sousse, Tunisia
Narender Kumar
Inter University Accelerator Centre
New Delhi, Delhi, India
Nicodemus Kure
Department of Physics, Kaduna State University
Kaduna, Nigeria
Nirupama Vattikunta
Department of Basic Sciences and Hummanities, Sree Vidyanikethan Engineering College
Tirupathi, Andhra Pradesh, India
Nurul Ekmi Rabat
Chemical Engineering Department, Universiti Teknologi PETRONAS
Perak, Malaysia
Oleksandr Matviichuk
Department of Sintering of Hard Alloys and Tungsten Containing Composites, V. Bakul Institute for Superhard Materials, National Academy of Sciences of Ukraine
Kyiv, Kyiv Oblast, Ukraine
Department of Chemistry, University of Liberia
Monrovia, Liberia
Paulraj S
Department of Physics, Vels Institute of Science Technology and Advanced Studies
Chennai, Taminadu, India
Pooja Srivastava
Amity School of Applied Sciences, Amity University Uttar Pradesh
Lucknow, Uttar Pradesh, India
Prasanna Kumar Acharya
Public Works Department, Government of Odisha
Bhubaneswar, Odisha, India
Qian Zhang
College of Materials Science and Engineering, Qingdao University of Science and Technology
Qingdao, Shandong, China
Rakesh Sharma
Department of Physics, Govt. College Shillai
Shillai, Himachal Pradesh, India
Raluca Maier
Composite Materials Department, Romanian Institute for Gas Turbines COMOTI
Bucharest, Romania
Ramanaskanda Braveenth
Department of Chemistry, Wonkwang University
Iksan, Jeonbuk, South Korea
Rani Pawar
Department of Physics, Sanjay Ghodawat University
Kolhapur, Maharashtra, India
Rezq Aljawfi
Department of Physics, Ibb University
Ibb, Yemen
Rishabh Garg
Department of Inorganic Chemistry, University of Cologne
Cologne, North Rhine-Westphalia, Germany
Rong Li
Department of Materials Science and Engineering, University of Tennessee
Knoxville, Tennessee, USA
Roxana Trifu
Aspen Aerogels Inc.
Northborough, Massachusetts, USA
Sabrina Acevedo
Deparment of Materials, Zulian Institute of Technology Research
Maracaibo, Zulia, Venezuela
Saeed Nouri
School of Metallurgy and Materials Engineering, Iran University of Science and Technology
Tehran, Iran
Sakshi Gupta
Department of Civil Engineering, Amity University
Gurgaon, Haryana, India
Salah Kouass
National Research Institute of Physical and Chemical Analysis, Technological Pole Sidi Thabet 2020
Bizerte, Tunisia
Samir Kopacic
Department of Pulp, Paper and Fiber Technology, Graz University of Technology
Graz, Styria, Austria
Samuel Atarah
Department of Physics, University of Ghana
Accra, Greater Accra, Ghana
Sandra Hernandez Aldave
Chemical Engineering, Swansea University
Swansea, Wales, UK
Sellam Ashok Kumar
Inorganic and Physical Chemistry Department, Indian Institute of Science
Bangalore, Karnataka, India
Professor Selvakumar Subbaiah
Department of Mechanical Engineering, Roever Engineering College
Perambalur, Tamilnadu, India
Peer Reviewers Acknowledgment

Peer reviewers are key to advancing scholarship and contributing to the quality of scholarly journals. We would like to thank the following reviewers who have taken part in the peer-review process for Advances in Materials.

Join as a Reviewer
Professor Selvakumar Subbaiah
Department of Mechanical Engineering, Roever Engineering College
Perambalur, Tamil Nadu, India
Sergey Tsarev
Skolkovo Institute of Science and Technology
Moscow, Moscow Region, Russia
Seyedeh Narjes Hosseini
Department of Mechanical Engineering, Persian Gulf University
Boushehr, Iran
Shanfu Sun
School of Chemistry and Chemical Engineering, Harbin Institute of Technology
Harbin, Heilongjiang, China
Shantonu Biswas
California NanoSystems Institute, University of California, Santa Barbara
Santa Barabara, California, USA
Shashwat Rathkanthiwar
Centre for Nano Science and Engineering, Indian Institute of Science
Bangalore, Karnataka, India
Shengli Zhang
Science and Engineering Faculty, Queensland University of Technology
Brisbane, Queensland, Australia
Shuqun Chen
College of Materials Science and Engineering, Beijing University of Technology
Beijing, China
Sohan Bir Singh
Department of Chemical Engineering, Indian Institute of Technology Guwahati
Guwahati, Assam, India
Subathra Devi
Department of Civil Engineering, Saveetha Engineering College
Chennai, Tamilnadu, India
Subhadip Goswami
Department of Chemistry, Northwestern University
Evanston, Illinois, USA
Sujoy Ghosh
Department of Electrical and Computer Engineering, University of New Hampshire
Durham, New Hampshire, USA
Venanzio Giannella
Department of Industrial Engineering, University of Salerno
Fisciano, Salerno, Italy
Venkata Ravindra Annavarapu
Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology
Kunming, Yunnan, China
Vera Butova
The Smart Materials Research Insitute, Southern Federal University
Rostov-on-Don, Russia
Víctor Jjoaquín Rico Gavira
Instituto de Ciencia de Materiales de Sevilla
Seville, Spain
Vishnukanthan Venkatachalapathy
Department of Physics, Centre for Materials Science and Nanotechnology, University of Oslo
Oslo, Norway
Weiguang Zhu
Department of Mechanical, Aerospace and Nuclear Engineering, Rensselaer Polytechnic Institute
Troy, New York, USA
Wen Hu
Brookhaven National Laboratory
Upton, New York, USA
Xiaochen Wang
Department of Materials Science and Engineer, University of Central Florida
Orlando, Florida, USA
Xinglin Yu
School of Information Science and Technology, Southwest Jiaotong University
Chengdu, Sichuan, China
Xinlin Wang
school of mechanical engineering, Dalian university of technology
Dalian, Liaoning, China
Xu Wang
Institute of Materials
Chengdu, Sichuan, China
Yang Zheng
School of Mechanical Engineering, Hebei University of Technology
Tianjin, China
Proportional Technologies Incorporated
Houston, Texas, USA
Yao Jiang
School of Materials Science and Engineering, Nanjing University of Science and Technology
Nanjing, Jiangsu, China
Yaping Ji
Department of Physics and Engineering Physics, Tulane University
New Orleans, Louisiana, USA
Yaying Feng
Department of Mechanical Engineering and Materials Science, Duke University
Durham, North Carolina, USA
Younes El Kacimi
Laboratory of Materials Engineering and Environment: Modeling and Application, Faculty of Science, University Ibn Tofail
Kénitra, Morocco
Younès Saadallah
Department of Mechanical Engineering, Jijel University
Jijel, Algeria
Yuanchao Li
Chemical and Petroleum Engineering, University of Kansas
Lawrence, Kansas, USA
Yunjiang Jin
School of Electronic and Information Engineering, Sun-Yat Sen University
Guangzhou, Guangdong, China
Zheng Ma
Department of Chemical Engineering, Ohio University
Athens, Ohio, USA
Zhonghao Zhou
Department of Materials and Metallurgy, University of Science and Technology Liaoning
Anshan, Liaoning, China
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186