Peer Reviewers
A.K.M. Nazrul Islam
Department of Mechanical Systems Engineering, Tokyo University of Agriculture and Technology
Tokyo, Kanto, Japan
Abdollah Panahi
Department of Mechanical Engineering, Malek-e-Ashtar University
Isfahan, Iran
Department of Mechanical Engineering, Military Institute of Science and Technology
Dhaka, Bangladesh
Ahmed Daabo
School of Engineering, University of Birmingham
Birmingham, West Midlands, UK
Ahmed Mahfouz M. M. Abdelgawad
Mechanical Power Engineering Department, National Research Centre
Giza, Dokki, Egypt
Ali Mosallaie
Department of Mechanic, Kashan University
Kashan, Esfahan, Iran
Alireza Azizi
School of Mechanical Engineering, Iran University of Science and Technology
Tehran, Iran
Ambarish Maji
Department of Mechanical Engineering, National Institute of Technology Silchar
Silchar, Assam, India
Amit Patil
Department of Mechanical Engineering, Pune University
Pune, Maharashtra, India
Aniket Ingrole
Department of Industrial and Manufacturing Engineering, Florida State University
Tallahassee, Florida, USA
Arash Nayebzadeh
Department of Mechanical and Aerospace Engineering, University of Central Florida
Orlando, Florida, USA
Arnaud Notué Kadjie
Department of Physics, Universiy of Yaoundé 1
Yaoundé, Centre, Cameroon
Arnav Sanyal
Department of Mechanical Engineering, University of Texas at San Antonio
San Antonio, Texas, USA
Ashish Goyal
Department of Mechanical Engineering, Manipal University Jaipur
Jaipur, Rajasthan, India
Avinash Jammalamadaka
Physics, Exa Corporation
Burlington, Massachusetts, USA
Ayotunde Olayinka
Department of Mechanical Engineering, University of Louisiana at Lafayette
Lafayette, Louisiana, USA
Department of Civil and Environmental Engineering, Amirkabir University of Technology
Tehran, Iran
Bentaleb Fayçal
Department of Mechanic, Ouargla University
Constantine, Algeria
Chengxin Cai
College of Information Science and Engineering, Henan University of Technology
Zhengzhou, Henan, China
Chunguang Xu
School of Mechanical Engineering, Beijing Institute of Technology
Beijing, China
Dan Moldovanu
Automotive Engineering and Transport Department, Technical University of Cluj-Napoca
Cluj-Napoca, Cluj, Romania
Deepak Kb
Department of Mechanical, Vivekananda College of Engineering and Technology
Puttur, Karnataka, India
Scientific Forming Technologies Corporation
Columbus, Ohio, USA
Deng Xiong
Department of Mechanical Engineering, Chongqing University
Chongqing,China, Chongqing, China
Dipalkumar Patel
Department of Mechanical Engineering, C.S.Patel Institute of Technology, CHARUSAT
Changa, Gujarat, India
Djamal Didane
Department of Aeronautical Engineering, Tun Hussein Onn University of Malaysia
Batu Pahat, Malaysia
Department of Mechanical Engineering, Parikrama College of Engineering, Pune University
Ahmednagar, Maharashtra, India
Dr. Imran Ahemad Khan
Department of Mechanical Engineering, Priyadarshini College of Engineering Nagpur
Nagpur, Maharashtra, India
Edward Chern Jinn Gan
Centre for Infrastructure Protection and Mining Safety, University of Wollongong
Wollongong, New South Wales, Australia
Esmaeel Fatahian
Department of Mechanical Engineering, Nour Branch, Islamic Azad University
Nour, Mazandaran, Iran
Farid Bahiraei
Department of Mechanical Engineering, University of Windsor
Windsor, Ontario, Canada
Department of Mechanical Engineering, Military Institute of Science and Technology
Dhaka, Bangladesh
Farzad Fariba
Mechanical Engineering Department, Islamic Azad University
Hamedan, Iran
Farzaneh Hajabdollahi
Department of Mechanical Engineering, University of Colorado Denver
Denver, Colorado, USA
Department of Mechanical Engineering, University of Maryland
Baltimore, Maryland, USA
Ghozlane Mehdia
Department of Mechanical Engineering, Higher Institute of Technological Studies Tunisia
Ariana, Tunisia
Gilberto Gomes
Civil and Environment Engineering Department, University of Brasilia
Brasilia, Federal District, Brazil
Guanfeng Zhang
Ansys Incorporated
Pittsburgh, PA, USA
Haifei Wang
College of Mechanic Engineering, Yangzhou University
Yangzhou, Jiangsu, China
Haifeng Cao
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences
Changchun, Jilin, China
Hichem Hassine
Higher Institute of Transport and Logistics of Sousse, Sousse University
Sousse, Tunisia
Himadri Majumder
Department of Mechanical Engineering, National Institute of Technology Rourkela
Rourkela, Odisha, India
Inoussa Tougri
Department of Mechanical Engineering, Federal University of Rio de Janeiro
Rio de Janeiro, Brazil
Jamel Mars
National School of Engineers of Sfax, University of Sfax
Sfax, Tunisia
Mechanical Engineering Department, University of Diyala
Baqubah, Diyala, Iraq
Jiapeng Yang
Department of Mechnical, East China University of Science and Technology
Shanghai, China
Jing Rao
School of Mechanical and Aerospace Engineering, Nanyang Technological University
Singapore
Johny James
School of Mechanical Engineering, Vellore Institute of Technology
Vellore, Tamil Nadu, India
Jun Yan
Department of Engineering Mechanics, Dalian University of Technology
Dalian, Liaoning, China
Kar Hing Yau
Dunham-Bush Industries Sdn Bhd
Kajang, Kuala Lumpur, Malaysia
Keith Friedman
Friedman Research Corporation
Austin, Texas, USA
Khmelnikov Evgeny
Department of Special Engineering, Ural Federal University
Nizhny Tagil, Sverdlovsk Region, Russia
Kok Hwa Yu
School of Mechanical Engineering, Universiti Sains Malaysia
Nibong tebal, Pulau Pinang, Malaysia
Kostiantyn Vasylevskyi
Mechanical Engineering Department, University of New Hampshire
Durham, New Hampshire, USA
Kun-Yung Chen
Department of Mechanical Engineering, Air force Institute of Technology
Kaohsiung, Gangshan, Taiwan
Kyung Hak Choo
School of Aerospace Engineering, Georgia Institute of Technology
Atlanta, Georgia, USA
Lanshen Guo
The School of Mechanical Engineering, Hebei University of Technology
Tianjin, China
Laxman Kamble
Principal D. Y. Patil Institute of Engineering and Technology, Savitribai Phule Pune University
Pune, Maharashtra, India
Liu Yang
School of Automation, Beijing Institute of Technology
Beijing, China
Department of Mechanical Engineering, Faculty of Engineering, Srinivas Institute of Technology
Mangaluru, Karnataka, India
Lorenzo Pellone
C.I.R.A. - Italian Aerospace Researche Centre
Capua, Caserta, Italy
Faculty of Mechanical Engineering, Universiti Malaysia Pahang
Malaysia
Malakonda Reddy Lekkala
Department of Civil and Environmental Engineering, University Technology of Petronas
Ipoh, Perak, Malaysia
Marina Las-Casas
Biosystems Informatics and Genomics Laboratory, Fund Oswald Cruz Minas (FIOCRUZ)
Belo Horizonte, Minas Gerais, Brazil
Masoud Arabbeiki
Department of Mechanical Engineering, Payame Noor University
Tehran, Iran
Mastaneh Moattari
Department of Mechanic, Amirkabir University of Technology
Tehran, Iran
Mauro Eduardo Benedet
Mechanical Department, Federal University of Santa Catarina
Florianópolis, Santa Catarina, Brazil
Md. Fakhruddin Hasan Nizami
Department of Mechanical Engineering, Methodist College of Engg. Tech., Osmania University
Hyderabad, Telangana, India
Mehran Heshmati
Department of Mechanical Engineering, Azad University, Central Branch
Tehran, Iran
Miguel Jagessar
Utilities Engineering, The University of Trinidad and Tobago
Port of Spain, Couva, Trinidad and Tobago
Milon Selvam Dennison
Department of Mechanical Engineering, Karpagam Academy of Higher Education
Coimbatore, Tamil Nadu, India
Mohamad Dzulhelmy Amari
School of Engineering, KDU University College
Shah Alam, Selangor, Malaysia
Mohamed Saiful Firdaus Hussin
Department of Mechanical Engineering Technology, Universiti Teknikal Malaysia Melaka
Malacca, Malaysia
Mohammad Ghasmabadian
Department of Mechanical Engineering, Ferdowsi University of Mashhad
Mashhad, Khorasan Razavi, Iran
Mohammad Sadraee Far
Department of Mechanical Engineering, Ferdowsi University
Mashhad, Khorasan Razavi, Iran
Mohammad M. Karimi
Department of Civil, Environmental and Architectural Engineering, the University of Kansa
Lawrence, Kansas State, USA
Mohammad Reza Homayoun
Department of Mathematics and Computer Science, Eindhoven University of Technology
Eindhoven, North Brabant, Netherlands
Morteza Bayati
Department of Mechanical Engineering, Urmia University of Technology
Urmia, West Azerbaijan, Iran
Mriganka Chaki
Department of Applied Mathematics, Indian Institute of Technology (ISM) Dhanbad
Dhanbad, Jharkhand, India
Narayana Rao Chalasani
Mechanical Engineering, Univeristy of Nevada
Reno, Nevada, USA
Naren Shankar Radha Krishnan
Department of Aeronautical Engineering, Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology
Chennai, Tamil Nadu, India
Nazeer Ahmad Anjum
Department of Mechanical Engineering, University of Engineering and Technology Taxila
Taxila, Punjab, Pakistan
Niknam Momenzadeh
Mechanical Engineering Department, University of Louisville
Louisville, Kentucky, USA
Nitin Panaskar
Department of Mechanical Engineering, Rajiv Gandhi Institute of Technology
Mumbai, Maharashtra, India
Parthasarathi Ramamoorthy
Department of Mechanical Engineering, VSB Engineering College
Karur, Tamil Nadu, India
Piotr Bera
Department of Machine Design and Technology, AGH University of Science and Technology
Krakow, Lesser Poland, Poland
Prachee Priyadarshinee
Department of Mechanical Engineering, National University of Singapore
Singapore
Prathamesh Potdar
Department of Mechanical Engineering, Mumbai University
Mumbai, Maharashtra, India
Praveen Kumar G
CO2 Research and Green Technologies Centre, VIT University
Vellore, Tamil Nadu, India
Priyadarsi Mrutyunjay Padhi
Department of Mechanical, Biju Patnaik University of Technology
Bhubaneswar, Odisha, India
Quhao Li
School of Mechanical Engineering, Shandong University
Jinan, Shandong, China
Radovan Petrovic
Department of Industrial Engineering, Faculty for Strategic and Operational Management, University Nikola Tesla Belgrade
Belgrade, Serbia
Rajiv Selvam
Department of Mechanical Engineering, Manipal University
Dubai, United Arab Emirates
Professor Ramesh Raju
Department of Mechanical Engineering, SREC, Jawaharlal Nehru Technical University
Nandyal, Andhara Pradesh, India
Ramsankar Veerakumar
Aerospace Department, Iowa State University
Ames, Iowa, USA
Ramzi Barwari
Department of Mechanical Engineering and mechatronics, Salahaddin University
Erbil, Ankawa, Iraq
Renan Fragelli
Department of Mechanical Engineering, Sao Paulo State University
Bauru, Sao Paulo, Brazil
Ricardo Panesi
Department of Thermal and Fluids Engineering, Federal Institute of Education, Science and Technology of São Paulo
São Paulo, Brazil
Richa Bansal
Schlumberger Ltd.
Houston, Texas, USA
Richard Ostwald
Institute of Mechanics, Technical University of Dortmund
Dortmund, North Rhine-Westphalia, Germany
Robert Hartmann
Department of Chemical and Metallurgical Engineering, Aalto University
Helsinki, Finland
Professor Rodrigo Blodorn
Mechanical Engineering Department, University Center of Brusque
Brusque, Santa Catarina, Brazil
Rosyida Permatasari
Mechanical Engineering, Universitas Trisakti
Jakarta, Dki Jaya, Indonesia
Ruoxing Wang
School of Industrial Engineering, Purdue University
West Lafayette, Indiana, USA
Saeed Hashemi
Department of Mechanical Engineering, University of Minnesota
Minneapolis, Minnesota, USA
Said Hicham Boukhalkhal
Department of Civil Engineering, University of Science and Technology Houari Boumediene
Djelfa, Algeria
Saifulnizan Jamian
Department of Engineering Mechanics, Universiti Tun Hussein Onn Malaysia
Batu Pahat, Johor, Malaysia
Peer Reviewers Acknowledgment

Peer reviewers are key to advancing scholarship and contributing to the quality of scholarly journals. We would like to thank the following reviewers who have taken part in the peer-review process for International Journal of Mechanical Engineering and Applications.

Join as a Reviewer
Samip Shah
Mechanical Engineering Department, C K Pithawalla College of Engineering and Technology, Gujarat Technological University
Surat, Gujarat, India
Sandeep Desai
Department of Automobile Engineering, Rajarambapu Institute of Technology, Shivaji University Kolhapur
Islampur, Maharashtra, India
Santosh Ravichandran
Institute for Energy Studies, Anna University
Chennai, Tamil Nadu, India
Semassou Clarence
Department of Mechanical and Energetic Engineering, University of Abomey-Calavi
Cotonou, Benin
Seyed Mohammad Zeyb Sayyadan
Electronics and Electrical Engineering Department, Islamic Azad University, Science and Research Branch
Tehran, Iran
Shervin Tashakori
Mechanical and Materials Department, Florida International University
Miami, Florida, USA
Siddarth Chintamani
Department of Mechanical and Aerospace Engineering, University of Texas at Arlington
Irving, Texas, USA
Sudarmadji Sudarmadji
Mechanical Department, State Polytechnic of Malang
Malang, Jawa Timur, Indonesia
Tae Hyun Baek
Department of Mechanical Engineering, Kunsan National University
Gunsan, Jonbuk-Do, South Korea
Taha Ahmed
Department Of Mechanics, Mosul University
Mosul, Iraq
Tariq Aburass
Department of Aeronautical Engineering, Karary University
Khartoum, Sudan
Thoralf Gerstmann
Department of Mechanical Engineering, Chemnitz University of Technology
Chemnitz, Saxony, Germany
V M Krushnarao Kotteda
Department of Mechanical Engineering, University of Texas at El Paso
El Paso, Texas, USA
Vallabh Patel
Department of Mechanical Engineering, LDRP Institute of Technology and Research
Gandhinagar, Gujarat, India
Vignesh P
Department of Design and Automation, School of Mechanical Engineering, Vellore Institute of Technology
Vellore, Tamil Nadu, India
Professor Vitalii Yanovych
Department of Processes and Equipment of Processing and Food Industries, Vinnytsia National Agrarian University
Vinnytsia, Ukraine
Wenjun Gao
School of Power and Energy, Northwestern Polytechnical University
Xi'an, Shaanxi, China
Wentao Dong
School of Electrical and Automation Engineering, East China Jiaotong University
Nanchang, Jiangxi, China
Xiangyang Dong
Department of Mechanical and Aerospace Engineering, Missouri University of Science and Technology
Rolla, Missouri, USA
Xue-She Wang
Department of Mechanical Engineering and Materials Science, Duke University
Durham, North Carolina, USA
Yao Li
The State Key Laboratory of Mechanical Transmissions, Chongqing University
Chongqing, China
Yi Feng Xiong
Department of Mechanical Engineering, Northwestern Polytechnic University
Xi'an, Shaanxi, China
Ying He
Department of Mechanical Engineering, Tianjin University Renai College
Tianjin, China
Yogesh Dewang
Department of Mechanical Engineering, Lakshmi Narain College of Technology
Bhopal, Madhya Pradesh, India
Yong Lu
College of Power and Energy Engineering, Harbin Engineering University
Harbin, Heilongjiang, China
Yonghui Park
Department of Mechanical Engineering, Yuhan University
Buchoen, Gyeong-Gi, South Korea
Yongliang Yuan
School of Mechanical Engineering, Dalian University of Technology
Dalian, Liaoning, China
Zhicheng Yang
Tamkang University Joint Research Centre for Engineering Structure Disaster Prevention and Control, Guangzhou University
Guangzhou, Guangdong, China
Zhiyuan Cao
School of Power and Energy, Northwestern Polytechnical University
Xi'an, Shaanxi, China
Zihan Chen
Auris Health, Inc.
Redwood City, California, USA
Zoltan Korka
Department of Mechanical Engineering, "Eftimie Murgu" University from Resita
Resita, Romania
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186