International Journal of Science, Technology and Society

Special Issue

Technology Transfer

  • Submission Deadline: 31 December 2014
  • Status: Submission Closed
  • Lead Guest Editor: A.K.M. Fahmidul Haque
About This Special Issue
Technology is one of the major issue and a main check point for development of a nation. Even every country is now very much concern about it. R&D, prototype development and innovation always depends on a healthy and structured technology transfer and diffusion. It not only depends on technoware, it is a complete package for humanware, infoware and orgaware as well. A good and conquering technology transfer can lead a nation towards the highest achievement.
Lead Guest Editor
  • A.K.M. Fahmidul Haque

    Respiratory and Antibiotics Laboratory, International Centre for Diarrhoeal Disease Research, Dhaka, Bangladesh

Guest Editors
  • Ranjini Kottaiyan

    Flaum Eye Institute, University of rochester, Rochester, United States

  • Fnu Gaurav

    Department of Surgery, School of Medicine, KU Medical Center, Kansas, United States

Published Articles
  • Double Cutter Face Milling of Spiral Bevel Gears

    Ryspek Usubamatov , Nor Zaiazmin Yahaya

    Issue: Volume 3, Issue 1-1, January 2015
    Pages: 10-16
    Received: 02 November 2014
    Accepted: 12 November 2014
    Published: 17 November 2014
    DOI: 10.11648/j.ijsts.s.2015030101.12
    Downloads:
    Views:
    Abstract: In manufacturing area, one of the most complex technological processes is the machining of spiral bevel gears. For these processes, special machine tools designed with peculiar manuals for calculating the gear geometry, and the setting-up processes were developed. The known technologies and design of gear-cutting machine tools are different and bas... Show More
  • A Study on the Dyeing of Sodium Hydroxide Treated Polyester / Cotton Blend Fabrics

    Jeyakodi Moses J. , Pitchai S.

    Issue: Volume 3, Issue 1-1, January 2015
    Pages: 1-9
    Received: 12 August 2014
    Accepted: 06 October 2014
    Published: 24 October 2014
    DOI: 10.11648/j.ijsts.s.2015030101.11
    Downloads:
    Views:
    Abstract: The polyester (100%), cotton (100%) and Polyester / Cotton blend fabrics (65 / 35; 50 / 50 & 35 / 65) were treated with sodium hydroxide followed by hydrophilic finishing and dyeing to impart hygroscopic and dyeing characteristics. Then the finished fabric was tested for k/s value, fastness properties, wetting behaviour, water retention, wicking be... Show More