The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin

Shuhrat Mamatovich Azizov; Xamit Tursunovich Axmedhodjaev

doi:doi:10.11648/j.ajmie.20160103.21

| Peer-Reviewed

The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin

Shuhrat Mamatovich Azizov, Xamit Tursunovich Axmedhodjaev

Published in American Journal of Mechanical and Industrial Engineering (Volume 1, Issue 3)

Received: 24 September 2016 Accepted: 19 October 2016 Published: 9 November 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In work considered process of optimal modelling of an angular position of saw cylinders in single-chamber two cylinders gin. For increase, durability work of saw disks and shaft, by the static analysis of pressure upon saws. That will increase wear resistance and will improve quality indicators of a fiber and seeds it will be accepted an optimum corner of an arrangement saw cylinders of 60⁰ degrees this decreases loading on bottom saw cylinder on 35% of percent and on top saw the cylinder decreases loading on 50% both increases productivity and working capacity saw cylinders several times.

Published in	American Journal of Mechanical and Industrial Engineering (Volume 1, Issue 3)
DOI	10.11648/j.ajmie.20160103.21
Page(s)	103-106
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Saw Cylinder, Static Loading, Corner, Loading Distributions, Wear Resistance

References

[1]	G. I. Miroshnechenko, “Bases of Designing of Machines of Primary Processing of Cotton” Book Theory of Ginning Machine, Moscow, 1972.
[2]	S. N. Nikiforov, “Resistance of material” publishes agency «High school», Moscow 1966.
[3]	Sh. M. Azizov and A. I. Karimov, “Defining the Interaction of Cotton with Hilly Ginning Kolosnic,” Journal of the Problem Mechanics, Tashkent Uzbekistan, Vol. 3, no. 1, pp 30-32, 2005.
[4]	Mamatovich, A. Sh. and Abdusamat, K. (2011) Definition of Increasing the Fiber Capturing Surface of Saw Teeth of Cotton Ginning Machine through Mathematic Modeling. World Journal of Mechanics, 1, 122-126. http://dx.doi.org/10.4236/wjm.2011.13017.
[5]	Mamatovich, A. Sh., Abdusamat, K. and Arras, P. (2013) The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw. World Journal of Mechanics, 3, 58-61. http://dx.doi.org/10.4236/wjm.2013.31004.
[6]	Mamamtovich, A. Sh and Axmedhodjaev X. T 2015 Theoretical Analysis of Gin Cylinder for Simulating Dual Saw Cylinder Chamber Gin for Increasing Wear proof, Energy Efficient, Saving Resources. http://dx.doi.org/10.4236/wjet.2015.
[7]	Mamamtovich AS (2016) Analysis of the Influence of Geometric Characteristics of the Saw and the Gasket of Saw Gin on the Life of Saw at Different Distances between the Saw. J Textile Sci Eng 6: 256. doi:10.4172/2165-8064.1000256.
[8]	Sh. M. Azizov “THE ANALYSIS OF COTTON PRIMARY FACTORIES SAW GINS ON THE EXIT OF SHORT FIBER” SCIENTIFIC–TECHNICAL JOURNAL STJ FerPI, 2016, Volume 20 Issue. 4. pp. 120-123.
[9]	J. Clif Boykin, Derek P. Whitelock, Carlos B. Armijo, Michael D. Buser, Gregory A. Holt, Thomas D. Valco, Dennis S. Findley, Edward M. Barnes and Michael D. Watson «Predicting Fiber Quality After Commercial Ginning Based on Fiber Obtained With Laboratory-Scale Gin Stands» The Journal of Cotton Science 14:34–45 (2010).
[10]	Karimov Abdusamat, Azizov Shuhrat Mamatovich, and Ismanov Muhammadziyo. “Mathematical Modeling Of the Technological Processes Original Processing Of Cotton”. International Journal of Innovation and Applied Studies. ISSN 2028-9324 Vol. 6 No. 1 May 2014, pp. 28-39 http://www.ijias.issr-journals.org/.
[11]	Saidnugmanov Umidjon Rustamovichand Azizov Shuhrat Mamatovich “Analysis of the strength of the saws to the dynamic and static loads “3th International Conference and Exhibition on Materials Science & Engineering Hampton Inn Tropicana, Las Vegas, NV, USA http://dx.doi.org/10.4172/2169-0022.S1.017.

Cite This Article

Plain Text BibTeX RIS

APA Style

Shuhrat Mamatovich Azizov, Xamit Tursunovich Axmedhodjaev. (2016). The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. American Journal of Mechanical and Industrial Engineering, 1(3), 103-106. https://doi.org/10.11648/j.ajmie.20160103.21

Copy | Download

ACS Style

Shuhrat Mamatovich Azizov; Xamit Tursunovich Axmedhodjaev. The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. Am. J. Mech. Ind. Eng. 2016, 1(3), 103-106. doi: 10.11648/j.ajmie.20160103.21

Copy | Download

AMA Style

Shuhrat Mamatovich Azizov, Xamit Tursunovich Axmedhodjaev. The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. Am J Mech Ind Eng. 2016;1(3):103-106. doi: 10.11648/j.ajmie.20160103.21

Copy | Download

@article{10.11648/j.ajmie.20160103.21,
  author = {Shuhrat Mamatovich Azizov and Xamit Tursunovich Axmedhodjaev},
  title = {The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {1},
  number = {3},
  pages = {103-106},
  doi = {10.11648/j.ajmie.20160103.21},
  url = {https://doi.org/10.11648/j.ajmie.20160103.21},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20160103.21},
  abstract = {In work considered process of optimal modelling of an angular position of saw cylinders in single-chamber two cylinders gin. For increase, durability work of saw disks and shaft, by the static analysis of pressure upon saws. That will increase wear resistance and will improve quality indicators of a fiber and seeds it will be accepted an optimum corner of an arrangement saw cylinders of 600 degrees this decreases loading on bottom saw cylinder on 35% of percent and on top saw the cylinder decreases loading on 50% both increases productivity and working capacity saw cylinders several times.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin
AU  - Shuhrat Mamatovich Azizov
AU  - Xamit Tursunovich Axmedhodjaev
Y1  - 2016/11/09
PY  - 2016
N1  - https://doi.org/10.11648/j.ajmie.20160103.21
DO  - 10.11648/j.ajmie.20160103.21
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 103
EP  - 106
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20160103.21
AB  - In work considered process of optimal modelling of an angular position of saw cylinders in single-chamber two cylinders gin. For increase, durability work of saw disks and shaft, by the static analysis of pressure upon saws. That will increase wear resistance and will improve quality indicators of a fiber and seeds it will be accepted an optimum corner of an arrangement saw cylinders of 600 degrees this decreases loading on bottom saw cylinder on 35% of percent and on top saw the cylinder decreases loading on 50% both increases productivity and working capacity saw cylinders several times.
VL  - 1
IS  - 3
ER  -

Copy | Download

Author Information

Shuhrat Mamatovich Azizov

Department of Mechanical Engineering, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan
Xamit Tursunovich Axmedhodjaev

Department of Mechanical Engineering, Namangan Institute of Engineering and Technology, Namangan, Uzbekistan

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Shuhrat Mamatovich Azizov, Xamit Tursunovich Axmedhodjaev. (2016). The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. American Journal of Mechanical and Industrial Engineering, 1(3), 103-106. https://doi.org/10.11648/j.ajmie.20160103.21

Copy | Download

ACS Style

Shuhrat Mamatovich Azizov; Xamit Tursunovich Axmedhodjaev. The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. Am. J. Mech. Ind. Eng. 2016, 1(3), 103-106. doi: 10.11648/j.ajmie.20160103.21

Copy | Download

AMA Style

Shuhrat Mamatovich Azizov, Xamit Tursunovich Axmedhodjaev. The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin. Am J Mech Ind Eng. 2016;1(3):103-106. doi: 10.11648/j.ajmie.20160103.21

Copy | Download

@article{10.11648/j.ajmie.20160103.21,
  author = {Shuhrat Mamatovich Azizov and Xamit Tursunovich Axmedhodjaev},
  title = {The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {1},
  number = {3},
  pages = {103-106},
  doi = {10.11648/j.ajmie.20160103.21},
  url = {https://doi.org/10.11648/j.ajmie.20160103.21},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20160103.21},
  abstract = {In work considered process of optimal modelling of an angular position of saw cylinders in single-chamber two cylinders gin. For increase, durability work of saw disks and shaft, by the static analysis of pressure upon saws. That will increase wear resistance and will improve quality indicators of a fiber and seeds it will be accepted an optimum corner of an arrangement saw cylinders of 600 degrees this decreases loading on bottom saw cylinder on 35% of percent and on top saw the cylinder decreases loading on 50% both increases productivity and working capacity saw cylinders several times.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - The Optimal Modeling of an Angular Position of Saw Cylinders in Single-Chamber Two Cylinders Gin
AU  - Shuhrat Mamatovich Azizov
AU  - Xamit Tursunovich Axmedhodjaev
Y1  - 2016/11/09
PY  - 2016
N1  - https://doi.org/10.11648/j.ajmie.20160103.21
DO  - 10.11648/j.ajmie.20160103.21
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 103
EP  - 106
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20160103.21
AB  - In work considered process of optimal modelling of an angular position of saw cylinders in single-chamber two cylinders gin. For increase, durability work of saw disks and shaft, by the static analysis of pressure upon saws. That will increase wear resistance and will improve quality indicators of a fiber and seeds it will be accepted an optimum corner of an arrangement saw cylinders of 600 degrees this decreases loading on bottom saw cylinder on 35% of percent and on top saw the cylinder decreases loading on 50% both increases productivity and working capacity saw cylinders several times.
VL  - 1
IS  - 3
ER  -

Copy | Download