Optical fiber attenuation is a fundamental parameter that determines the efficiency and reliability of optical communication systems. Understanding how attenuation varies with transmission wavelength is essential for optimizing fiber optic links, particularly in long-distance and high-capacity networks. This study presents an experimental investigation of wavelength-dependent attenuation in optical fibers, focusing on commonly used telecommunication windows at 850 nm, 1310 nm, and 1550 nm. The experimental setup consists of an optical fiber link, optical sources operating at the selected wavelengths, and a calibrated optical power meter. For each wavelength, the input optical power and the output power after propagation through a fixed length of optical fiber were measured. The attenuation coefficient was then calculated in decibels per kilometer using standard logarithmic relations. Care was taken to minimize connector and coupling losses in order to ensure measurement consistency. The results reveal a clear dependence of optical attenuation on wavelength. Higher attenuation values were observed at 850 nm, primarily due to increased Rayleigh scattering effects at shorter wavelengths. At 1310 nm, the attenuation was significantly reduced, corresponding to one of the low-loss transmission windows of silica fibers. The lowest attenuation was recorded at 1550 nm, confirming this wavelength band as the most suitable for long-distance optical transmission. The experimental findings are in good agreement with theoretical expectations related to material absorption and scattering mechanisms in optical fibers. This study highlights the importance of wavelength selection in fiber optic communication system design. The simplicity of the experimental approach makes it suitable for educational laboratories and preliminary performance evaluations, while the results provide practical insight into the physical mechanisms governing optical losses. Overall, the work confirms that operating at longer wavelengths significantly improves transmission efficiency and supports the widespread use of the 1310 nm and 1550 nm bands in modern optical networks.
| Published in | Advances in Wireless Communications and Networks (Volume 11, Issue 1) |
| DOI | 10.11648/j.awcn.20261101.11 |
| Page(s) | 1-6 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2026. Published by Science Publishing Group |
Optical Fiber, Attenuation, Wavelength, Optical Losses, Fiber Optics Communication
| [1] | G. P. Agrawal, Fiber-Optic Communication Systems, 5th ed., New York, NY, USA: Wiley, 2012. |
| [2] | J. M. Senior, Optical Fiber Communications: Principles and Practice, 3rd ed., Upper Saddle River, NJ, USA: Pearson, 2009. |
| [3] | A. K. Ghatak and K. Thyagarajan, Introduction to Fiber Optics, Cambridge, UK: Cambridge University Press, 1998. |
| [4] | J. Hecht, Understanding Fiber Optics, 5th ed., Boston, MA, USA: Pearson, 2015. |
| [5] | M. N. Islam, “Rayleigh scattering in optical fibers,” J. Lightwave Technol., vol. 5, no. 4, pp. 718–723, Apr. 1987. |
| [6] | D. Marcuse, Theory of Dielectric Optical Waveguides, 2nd ed., San Diego, CA, USA: Academic Press, 1991. |
| [7] | S. O. Kasap, Optoelectronics and Photonics: Principles and Practices, 2nd ed., Upper Saddle River, NJ, USA: Pearson, 2013. |
| [8] | P. E. Green, “Attenuation in optical fibers and its measurement,” Optical Engineering, vol. 24, no. 3, pp. 345–350, 1985. |
| [9] | H. Kogelnik and T. Li, “Laser beams and resonators,” Applied Optics, vol. 5, no. 10, pp. 1550–1567, Oct. 1966. |
| [10] | R. Kashyap, Fiber Bragg Gratings, 2nd ed., San Diego, CA, USA: Academic Press, 2009. |
| [11] | E. Desurvire, Erbium-Doped Fiber Amplifiers: Principles and Applications, 2nd ed., New York, NY, USA: Wiley, 2002. |
| [12] | K. Okamoto, Fundamentals of Optical Waveguides, 2nd ed., San Diego, CA, USA: Academic Press, 2006. |
| [13] | S. R. Kumar, R. K. Varshney, and A. Kumar, “Wavelength-dependent attenuation in silica optical fibers: Simulation study,” Optik, vol. 124, no. 19, pp. 4145–4152, 2013. |
| [14] | A. D. Ellis and F. C. G. Gunning, “Spectral efficiency limits in optical fiber transmission,” J. Lightwave Technol., vol. 27, no. 22, pp. 3984–3998, Nov. 2009. |
| [15] | MathWorks, MATLAB R2025a Documentation, The MathWorks Inc., Natick, MA, USA, 2025. |
APA Style
Erica, R. H. N., Andriamanalina, A. N. (2026). Analysis of Optical Fiber Attenuation as a Function of Wavelength. Advances in Wireless Communications and Networks, 11(1), 1-6. https://doi.org/10.11648/j.awcn.20261101.11
ACS Style
Erica, R. H. N.; Andriamanalina, A. N. Analysis of Optical Fiber Attenuation as a Function of Wavelength. Adv. Wirel. Commun. Netw. 2026, 11(1), 1-6. doi: 10.11648/j.awcn.20261101.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.awcn.20261101.11,
author = {Randriana Heritiana Nambinina Erica and Ando Nirina Andriamanalina},
title = {Analysis of Optical Fiber Attenuation as a Function of Wavelength},
journal = {Advances in Wireless Communications and Networks},
volume = {11},
number = {1},
pages = {1-6},
doi = {10.11648/j.awcn.20261101.11},
url = {https://doi.org/10.11648/j.awcn.20261101.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.awcn.20261101.11},
abstract = {Optical fiber attenuation is a fundamental parameter that determines the efficiency and reliability of optical communication systems. Understanding how attenuation varies with transmission wavelength is essential for optimizing fiber optic links, particularly in long-distance and high-capacity networks. This study presents an experimental investigation of wavelength-dependent attenuation in optical fibers, focusing on commonly used telecommunication windows at 850 nm, 1310 nm, and 1550 nm. The experimental setup consists of an optical fiber link, optical sources operating at the selected wavelengths, and a calibrated optical power meter. For each wavelength, the input optical power and the output power after propagation through a fixed length of optical fiber were measured. The attenuation coefficient was then calculated in decibels per kilometer using standard logarithmic relations. Care was taken to minimize connector and coupling losses in order to ensure measurement consistency. The results reveal a clear dependence of optical attenuation on wavelength. Higher attenuation values were observed at 850 nm, primarily due to increased Rayleigh scattering effects at shorter wavelengths. At 1310 nm, the attenuation was significantly reduced, corresponding to one of the low-loss transmission windows of silica fibers. The lowest attenuation was recorded at 1550 nm, confirming this wavelength band as the most suitable for long-distance optical transmission. The experimental findings are in good agreement with theoretical expectations related to material absorption and scattering mechanisms in optical fibers. This study highlights the importance of wavelength selection in fiber optic communication system design. The simplicity of the experimental approach makes it suitable for educational laboratories and preliminary performance evaluations, while the results provide practical insight into the physical mechanisms governing optical losses. Overall, the work confirms that operating at longer wavelengths significantly improves transmission efficiency and supports the widespread use of the 1310 nm and 1550 nm bands in modern optical networks.},
year = {2026}
}
TY - JOUR T1 - Analysis of Optical Fiber Attenuation as a Function of Wavelength AU - Randriana Heritiana Nambinina Erica AU - Ando Nirina Andriamanalina Y1 - 2026/01/19 PY - 2026 N1 - https://doi.org/10.11648/j.awcn.20261101.11 DO - 10.11648/j.awcn.20261101.11 T2 - Advances in Wireless Communications and Networks JF - Advances in Wireless Communications and Networks JO - Advances in Wireless Communications and Networks SP - 1 EP - 6 PB - Science Publishing Group SN - 2575-596X UR - https://doi.org/10.11648/j.awcn.20261101.11 AB - Optical fiber attenuation is a fundamental parameter that determines the efficiency and reliability of optical communication systems. Understanding how attenuation varies with transmission wavelength is essential for optimizing fiber optic links, particularly in long-distance and high-capacity networks. This study presents an experimental investigation of wavelength-dependent attenuation in optical fibers, focusing on commonly used telecommunication windows at 850 nm, 1310 nm, and 1550 nm. The experimental setup consists of an optical fiber link, optical sources operating at the selected wavelengths, and a calibrated optical power meter. For each wavelength, the input optical power and the output power after propagation through a fixed length of optical fiber were measured. The attenuation coefficient was then calculated in decibels per kilometer using standard logarithmic relations. Care was taken to minimize connector and coupling losses in order to ensure measurement consistency. The results reveal a clear dependence of optical attenuation on wavelength. Higher attenuation values were observed at 850 nm, primarily due to increased Rayleigh scattering effects at shorter wavelengths. At 1310 nm, the attenuation was significantly reduced, corresponding to one of the low-loss transmission windows of silica fibers. The lowest attenuation was recorded at 1550 nm, confirming this wavelength band as the most suitable for long-distance optical transmission. The experimental findings are in good agreement with theoretical expectations related to material absorption and scattering mechanisms in optical fibers. This study highlights the importance of wavelength selection in fiber optic communication system design. The simplicity of the experimental approach makes it suitable for educational laboratories and preliminary performance evaluations, while the results provide practical insight into the physical mechanisms governing optical losses. Overall, the work confirms that operating at longer wavelengths significantly improves transmission efficiency and supports the widespread use of the 1310 nm and 1550 nm bands in modern optical networks. VL - 11 IS - 1 ER -
Telecommunications, Doctoral School of Engineering Sciences and Innovation, Antananarivo, Madagascar
Telecommunications, Doctoral School of Engineering Sciences and Innovation, Antananarivo, Madagascar
Information