International Journal of Energy and Power Engineering

| Peer-Reviewed |

Loss Calculation and Optimization Design of High Frequency Transformer

Received: 21 October 2015    Accepted: 22 October 2015    Published: 30 November 2015
Views:       Downloads:

Share This Article

Abstract

In this paper, the magnetization and loss properties are analyzed and compared of topical magnetic materials. The calculation methods are studied for the losses of the core and windings of the High Frequency Transformer (HFT). Based on the evaluation of the temperature increment, an optimization method is presented for the design of HFT. Finally, the losses of a test model of HFT is calculated and the results are compared with those tested.

DOI 10.11648/j.ijepe.s.2016050101.18
Published in International Journal of Energy and Power Engineering (Volume 5, Issue 1-1, February 2016)

This article belongs to the Special Issue Numerical Analysis, Material Modeling and Validation for Magnetic Losses in Electromagnetic Devices

Page(s) 53-56
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

High Frequency Transformer, Magnetic Materials, Loss, Optimization

References
[1] Boglietti A,Cavagnino A,Lazzari M,et al. Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approach [J]. IEEE Trans. Magn., 39(2): pp.981-989, March 2003.
[2] Bertotti G. General properties of power losses in soft ferromagnetic materials[J]. IEEE Trans. Magn., 24(1): pp621-630, January, 1988.
[3] P.L. Dowell. Effect of eddy currents in transformer windings[J]. Proc. Inst. Elect. Eng., 113, pp1387-1394, 1996.
[4] I. D. Mayergoyz, G. Friedman, and C. Salling, “Comparison of the classical and generalized Preisach hysteresis models with experiments,” IEEE Trans. Magn., vol. 25, no. 5, pp. 3925–3927, Sep. 1989.
[5] E. Barbisio, F. Fiorillo, and C. Ragusa, “Predicting loss in magnetic steels under arbitrary induction waveform and with minor hysteresis loops,” IEEE Trans. Magn., vol. 40, no. 4, pp. 1810–1819, Jul. 2004.
Cite This Article
  • APA Style

    Lin Li, Keke Liu, Xiaoying Zhang, Ning Zhang. (2015). Loss Calculation and Optimization Design of High Frequency Transformer. International Journal of Energy and Power Engineering, 5(1-1), 53-56. https://doi.org/10.11648/j.ijepe.s.2016050101.18

    Copy | Download

    ACS Style

    Lin Li; Keke Liu; Xiaoying Zhang; Ning Zhang. Loss Calculation and Optimization Design of High Frequency Transformer. Int. J. Energy Power Eng. 2015, 5(1-1), 53-56. doi: 10.11648/j.ijepe.s.2016050101.18

    Copy | Download

    AMA Style

    Lin Li, Keke Liu, Xiaoying Zhang, Ning Zhang. Loss Calculation and Optimization Design of High Frequency Transformer. Int J Energy Power Eng. 2015;5(1-1):53-56. doi: 10.11648/j.ijepe.s.2016050101.18

    Copy | Download

  • @article{10.11648/j.ijepe.s.2016050101.18,
      author = {Lin Li and Keke Liu and Xiaoying Zhang and Ning Zhang},
      title = {Loss Calculation and Optimization Design of High Frequency Transformer},
      journal = {International Journal of Energy and Power Engineering},
      volume = {5},
      number = {1-1},
      pages = {53-56},
      doi = {10.11648/j.ijepe.s.2016050101.18},
      url = {https://doi.org/10.11648/j.ijepe.s.2016050101.18},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.s.2016050101.18},
      abstract = {In this paper, the magnetization and loss properties are analyzed and compared of topical magnetic materials. The calculation methods are studied for the losses of the core and windings of the High Frequency Transformer (HFT). Based on the evaluation of the temperature increment, an optimization method is presented for the design of HFT. Finally, the losses of a test model of HFT is calculated and the results are compared with those tested.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Loss Calculation and Optimization Design of High Frequency Transformer
    AU  - Lin Li
    AU  - Keke Liu
    AU  - Xiaoying Zhang
    AU  - Ning Zhang
    Y1  - 2015/11/30
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ijepe.s.2016050101.18
    DO  - 10.11648/j.ijepe.s.2016050101.18
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 53
    EP  - 56
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.s.2016050101.18
    AB  - In this paper, the magnetization and loss properties are analyzed and compared of topical magnetic materials. The calculation methods are studied for the losses of the core and windings of the High Frequency Transformer (HFT). Based on the evaluation of the temperature increment, an optimization method is presented for the design of HFT. Finally, the losses of a test model of HFT is calculated and the results are compared with those tested.
    VL  - 5
    IS  - 1-1
    ER  - 

    Copy | Download

Author Information
  • Department of Electrical and Electronics Engineering, North China Electric Power University, Beijing, China

  • Department of Electrical and Electronics Engineering, North China Electric Power University, Beijing, China

  • Department of Electrical and Electronics Engineering, North China Electric Power University, Beijing, China

  • Department of Electrical and Electronics Engineering, North China Electric Power University, Beijing, China

  • Sections