The shell of eggs, kaolin and fiberglass epoxy oligomers and fillers were taken as the object of research and compositions based on them were prepared, the physical and mechanical properties of the composition were studied using the most modern research methods. properties were determined by conducting several tests (tensile, bending, composite density, water absorption, hardness). Epoxy-based compositions were prepared and their properties were studied using various fillers. For this purpose, polyethylene polyamine ED-20 brand epoxy oligomer and its hardener were used. In scientific research, the effect of various fillers on the properties of epoxy resin has been studied experimentally. The dependence of the composition of the insoluble part of ENO on the drying time at a temperature of 110°C - 150°C was determined. It was found that the inclusion of fillers in the composite material greatly affects the mechanical properties. Thus, in a certain mass fraction of kaolin and eggshell powder, the adhesion strength increased, but the subsequent increase in the amount of fillers decreased. In general, it can be noted that the tensile strength of unmodified epoxy resin is higher than the strength of epoxy compositions, and the modulus of elasticity is lower. This indicates that the addition of filler to the epoxy resin and glass / epoxy resin reduced the tensile strength and increased the modulus of elasticity. The result allows the buoy to be used in industry.
| Published in | Modern Chemistry (Volume 9, Issue 4) |
| DOI | 10.11648/j.mc.20210904.11 |
| Page(s) | 73-76 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Epoxy, Oligomer, Eggshell, Kaolin, Glass, Fiber, Composition, Tensile, Bending
| [1] | J. Liu, E. Wang, D. Song, S. Wang, and Y. Nia, “Effect of rock strength on failure mode and mechanical behavior of composite samples,” Arabian Journal of Geosciences, vol. 8, no. 7 2015, pp. 4527–4539. |
| [2] | S. Chen, D. Yin, F. Cao, Y. Liu, and K. Ren, “An overview of integrated surface subsidence-reducing technology in mining areas of China,” Natural Hazards, vol. 81, no. 2, 2016 pp. 1129–1145. |
| [3] | S. Chen, D. Yin, N. Jiang, F. Wang, and Z. Zhao, “Mechanical properties of oil shale-coal composite samples,” International Journal of Rock Mechanics and Mining Sciences, vol. 123, 2019 p. 104120. |
| [4] | R.-H. Cao, P. Cao, H. Lin, C. Z. Pu, and K. Our, “Mechanical behavior of brittle rock-like specimens with pre-existing fissures under uniaxial loading, experimental studies and particle mechanics approach,” Rock Mechanics and Rock Engineering, vol. 49, no. 3. 2016, pp. 763–783. |
| [5] | T. B. Zhao, W. Y. Goo, C. P. Lu, and G. M. Zhao, “Failure characteristics of combined coal-rock with different interfacial angles,” Aeromechanics and Engineering, vol. 11, no. 3, 2016. pp. 345–359. |
| [6] | Y. L. Tan, X. S. Liu, B. Shen, J. G. Ning, and Q. H. GU, “New approaches to testing and evaluating the impact capability of coal seam with hard roof and/or floor in coal mines,” Aeromechanics and Engineering, vol. 14, no. 4, 2018. pp. 367–376. |
| [7] | T. Wang, Y. D. Jiang, S. J. Zhan, and C. Wang, “Frictional sliding tests on combined coal-rock samples,” Journal of Rock Mechanics and Geotechnical Engineering, vol. 6, no. 3,, 2014 pp. 280–286. |
| [8] | Shikhaliev K. Technology of manufacturing a nuclear magnetic resonance probe NMR. International scientific journal United –Journal Tallinn-2018- N11 - C. 36-38. E-mail: issue@united-journal.info. |
| [9] | Shykhaliev K. Modification of bitumen with plastic and rubber waste. World science Warsaw Poland 2018 -№1 (29) 2 C. 28-30 Zsglolal.poland@gmail.com. |
| [10] | Shixaliyev Kerem Sefi Plasticiration of the Butadiene-nitrile Rubber with the Dicaprieathe etner of diphenylpropane European, Science reiew. Premir publishing scientific journal. Vienna, Austria. ISSN 2310-5577. 2 №. Р. 27. E-mail: pub@publishing.org. |
| [11] | Shixaliyev Kerem Sefi The study of the properties of limestone graius surfaces and defermination of optimal proportions between breacstone and limestone. British Journal of Internation in science and Tekhnology Science and Beyoud publishing UK. ISSN 2398-9289. 2018. Volume 3, ISSUEL 1. P. 31-36. |
| [12] | Shikhaliev K. Studying the crosslinking mechanism and structure of crosslinked polyethylene. Eurasian Union learned (ESU). U. Moscow Monthly scientific journal. 2018. –No 4 (49). 3 part. S. 73-77. |
| [13] | Serenko O. A., Goncharuk G. P. et al. / Effect of temperature on the deformation behavior of a composite based on polypropylene and rubber particles // High Molecular Compounds. -2007.-No. 1. -P. 71-78. |
| [14] | Kerem Shixaliyev. Theory and practice of obtaining composite materials based on polymer blends. Proceedings of the Fouth International Confrense of Euroрean Academy of Science BONN, GERMANY. 2019, -pp 32-33. |
| [15] | Amirov Fariz. Shixaliyev Kerem. Properties of Linear Low Density Polyethylene. International Journal of Innovative Technology and Exploring Engineering (IJITEE). Volume-9 Issue-9, July 2020. 348-352 ISSN: 2278-3075. SCOPU Shttps: //www.ijitee.org/download/volume-9-issue-3/ |
| [16] | Kerem Shixaliyev. Paint and Varnish Materials Based on Epoxy Novolac oliqomers Jour of Adv Research in Dynamical & Control Systems. Vol. 12, Special Issue-02, 2020. Рр 351-358. |
| [17] | Kerem Shixaliyex Sefi. DETERMINATION OF COMPATIBILITY OF POLYMER SYSTEMS, SKEP, PU, KhKPE and CH EMICAL FEATURES OF THEIR MIXTURES. Jour of Adv Research in Dynamical & Control Systems. Vol. 12, Special Issue-02, 2020. рr 359-370. |
APA Style
Shixaliyev Kerem Sefi. (2021). Study of the Effect of Various Fillers on the Properties of Epoxy Oligomers. Modern Chemistry, 9(4), 73-76. https://doi.org/10.11648/j.mc.20210904.11
ACS Style
Shixaliyev Kerem Sefi. Study of the Effect of Various Fillers on the Properties of Epoxy Oligomers. Mod. Chem. 2021, 9(4), 73-76. doi: 10.11648/j.mc.20210904.11
AMA Style
Shixaliyev Kerem Sefi. Study of the Effect of Various Fillers on the Properties of Epoxy Oligomers. Mod Chem. 2021;9(4):73-76. doi: 10.11648/j.mc.20210904.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.mc.20210904.11,
author = {Shixaliyev Kerem Sefi},
title = {Study of the Effect of Various Fillers on the Properties of Epoxy Oligomers},
journal = {Modern Chemistry},
volume = {9},
number = {4},
pages = {73-76},
doi = {10.11648/j.mc.20210904.11},
url = {https://doi.org/10.11648/j.mc.20210904.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.mc.20210904.11},
abstract = {The shell of eggs, kaolin and fiberglass epoxy oligomers and fillers were taken as the object of research and compositions based on them were prepared, the physical and mechanical properties of the composition were studied using the most modern research methods. properties were determined by conducting several tests (tensile, bending, composite density, water absorption, hardness). Epoxy-based compositions were prepared and their properties were studied using various fillers. For this purpose, polyethylene polyamine ED-20 brand epoxy oligomer and its hardener were used. In scientific research, the effect of various fillers on the properties of epoxy resin has been studied experimentally. The dependence of the composition of the insoluble part of ENO on the drying time at a temperature of 110°C - 150°C was determined. It was found that the inclusion of fillers in the composite material greatly affects the mechanical properties. Thus, in a certain mass fraction of kaolin and eggshell powder, the adhesion strength increased, but the subsequent increase in the amount of fillers decreased. In general, it can be noted that the tensile strength of unmodified epoxy resin is higher than the strength of epoxy compositions, and the modulus of elasticity is lower. This indicates that the addition of filler to the epoxy resin and glass / epoxy resin reduced the tensile strength and increased the modulus of elasticity. The result allows the buoy to be used in industry.},
year = {2021}
}
TY - JOUR T1 - Study of the Effect of Various Fillers on the Properties of Epoxy Oligomers AU - Shixaliyev Kerem Sefi Y1 - 2021/11/23 PY - 2021 N1 - https://doi.org/10.11648/j.mc.20210904.11 DO - 10.11648/j.mc.20210904.11 T2 - Modern Chemistry JF - Modern Chemistry JO - Modern Chemistry SP - 73 EP - 76 PB - Science Publishing Group SN - 2329-180X UR - https://doi.org/10.11648/j.mc.20210904.11 AB - The shell of eggs, kaolin and fiberglass epoxy oligomers and fillers were taken as the object of research and compositions based on them were prepared, the physical and mechanical properties of the composition were studied using the most modern research methods. properties were determined by conducting several tests (tensile, bending, composite density, water absorption, hardness). Epoxy-based compositions were prepared and their properties were studied using various fillers. For this purpose, polyethylene polyamine ED-20 brand epoxy oligomer and its hardener were used. In scientific research, the effect of various fillers on the properties of epoxy resin has been studied experimentally. The dependence of the composition of the insoluble part of ENO on the drying time at a temperature of 110°C - 150°C was determined. It was found that the inclusion of fillers in the composite material greatly affects the mechanical properties. Thus, in a certain mass fraction of kaolin and eggshell powder, the adhesion strength increased, but the subsequent increase in the amount of fillers decreased. In general, it can be noted that the tensile strength of unmodified epoxy resin is higher than the strength of epoxy compositions, and the modulus of elasticity is lower. This indicates that the addition of filler to the epoxy resin and glass / epoxy resin reduced the tensile strength and increased the modulus of elasticity. The result allows the buoy to be used in industry. VL - 9 IS - 4 ER -
Information
Email: