World Journal of Applied Physics

Submit a Manuscript

Publishing with us to make your research visible to the widest possible audience.

Propose a Special Issue

Building a community of authors and readers to discuss the latest research and develop new ideas.

Geotechnical Study and Determination of the Chemical and Mechanical Characterization of Clay Taken from the Gaoui Pottery Area Stabilised by Gum Arabic

Clay has always been used by our ancestors for the manufacture of rudimentary pottery. Nowadays, the use of this material is experiencing a resurgence in the field of construction because of its availability, its abundance and its shaping requiring little energy. Clay materials are abundant, and the current trend is to build with sustainable, environmentally friendly and less energy-consuming materials by combining them with additives for stability. The geotechnical study includes particle size analysis, Atterberg limits, methylene blue tests and normal Proctor tests. The simple compressive strength of compressed clay bricks stabilized with acacia seyal gum arabic was determined. The experimental results show that the soil studied is too fine, with 97.732% passing through the 80 µm sieve, with 65.3% clay, 32% silt and only 2.7% sand, optimum moisture content of 18.6% and dry density of 1.66 determined by Normal Proctor test. The physico-chemical analysis shows that silica (SiO2) is dominant, followed by iron oxide (Fe2O3) with respective percentages of 67.94 and 12.75. Finally, the addition of gum arabic improved the mechanical strength of this plastic type clay. It went from 3.14 MPa for 100% clay to 4.25 MPa for 8% gum arabic an increase of 35%.

Clay, Gum Arabic, Geotechnical Study, Physico-Chemical Characteristics, Mechanical Characteristics

APA Style

Abdallah Ban-Nah Mahamat, Ali Abakar, Mahamat Barka, Abraham Tetang Fokone, Abdallah Dadi Mahamat, et al. (2023). Geotechnical Study and Determination of the Chemical and Mechanical Characterization of Clay Taken from the Gaoui Pottery Area Stabilised by Gum Arabic. World Journal of Applied Physics, 8(2), 13-19. https://doi.org/10.11648/j.wjap.20230802.11

ACS Style

Abdallah Ban-Nah Mahamat; Ali Abakar; Mahamat Barka; Abraham Tetang Fokone; Abdallah Dadi Mahamat, et al. Geotechnical Study and Determination of the Chemical and Mechanical Characterization of Clay Taken from the Gaoui Pottery Area Stabilised by Gum Arabic. World J. Appl. Phys. 2023, 8(2), 13-19. doi: 10.11648/j.wjap.20230802.11

AMA Style

Abdallah Ban-Nah Mahamat, Ali Abakar, Mahamat Barka, Abraham Tetang Fokone, Abdallah Dadi Mahamat, et al. Geotechnical Study and Determination of the Chemical and Mechanical Characterization of Clay Taken from the Gaoui Pottery Area Stabilised by Gum Arabic. World J Appl Phys. 2023;8(2):13-19. doi: 10.11648/j.wjap.20230802.11

Copyright © 2023 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

1. Bruno AW, Gallipoli D, Perlot-Bascoules C, (2015) Mud bricks: high pressure compaction procedure and influence on mechanical properties. Civil Engineering University Meetings.
2. Ganou Koungang BM, Ndapeu D, Tchemou G, (2019) Hydromechanical behavior of BTCs with Canarium schweinfurthii and Cocos nucifera aggregates: durability analysis. International conference marking the 40th anniversary of ENSET Douala.
3. Ibnoussina M, Dimad A, El Amrani A,(2016) Soil material characterization in the plain of Haouz (Morocco), to build earthen. J. Mater. Environ. Sci 7: 3623-3633.
4. Phung T, Le Guern M, Boutouil M, (2017) Mechanical and thermal performance of cob materials. Academic Journal of Civil Engineering 35: 166-172.
5. Boulerbah T. (2019) Improving the thermal comfort of traditional housing by adapting a high-performance material and treating the patio space. Case study protected sector of the city of Laghouat. Mohamed Khider-Biskra University.
6. Lejeal F. (1998) Gum arabic: an ancestral resource for the twenty-first century? Tropical and Mediterranean Markets 53: 941-944.
7. Amane T and Mèdard L. (2013) Transport problems in the Gum Arabic sector in Chad. Open Science Repository Geography: e70081931.
8. Palou Madi O. (2007) Introduction of gum acacias (Acacia senegal and A. polyacantha) in fields in northern Cameroon, socio-economic constraints. University of Toulouse-Le Mirail.
9. CISSE M, FAYE PG, AYESSOU N, (2018) Determination of the optimal ratio of gum arabic to stabilize anthocyanins of beverages based on aqueous extract of hibiscus sabdariffa-L stored at 30 C. Afrique Science 14: 145-151.
10. Ali A, Benelmir R, Tanguier J-L, (2017) Mechanical characteristics of N'Djamena clay stabilized by gum arabic. Afrique Science 13: 330-341.
11. ZAGALO A-hH. (2022) Geotechnical characterization of clay materials from the 10th district of the city of n'djamena (chad) with a view to their use as fired bricks. applied and engineering sciences 3: 1-7.
12. Mihoubi D. (2004) Dehydration of clays by compression and drying. Modeling and simulation aspects. University of pau and pays de l'adour.
13. Laibi AB, Gomina M, Sorgho B,. (2017) Physico-chemical and geotechnical characterization of two clay sites in Benin with a view to their valorization in eco-construction. International Journal of Biological and Chemical Sciences 11: 499-514.
14. Gaye S, F. Njank, Cisse IK, et al. (2001) Characterization of the thermal and mechanical properties of recycled polymer concrete. Journal Science 1: 53-66.
15. Sacristan N. (2019) Evaluation of pot lining treated as a cementitious addition in concrete. Superior Technology School.
16. Qlihaa A, Dhimni S, Melrhaka F, (2016) Physico-chemical characterization of a morrocan clay. J. Mater. Approximately. Sci 7: 1741-1750.