| Peer-Reviewed

Utilization of Physalis Pith Ash as a Pozzolanic Material in Portland Cement Pastes

Received: 23 February 2021    Accepted: 15 March 2021    Published: 26 March 2021
Views:       Downloads:
Abstract

Physalis pith ash (PPA) is a renewable and green supplementary cementitious material. It is an effective approach to reduce the quantity of cement that could be used in blended cements. This will reduce the CO2↑ emission, which in turn will lower the environmental pollution. In the current study, the influence of PPA on physicomechanical characteristics of hydrated cement pastes containing various ratios of PPA (0-30 wt.%) up to 90 days was evaluated. Results showed that the water of consistensy as well as setting times, chemically-bound water content, bulk density and compressive strength increased with PPA content. The apparent porosity and calcium dioxide (or free lime) content were clearly reduced with increasing the PPA content. It is therefore concluded that the cement could be partially replaced by 25 wt.% PPA with no reverse response on the features of cement pastes. Any further increase of PPA content, it affected negatively on all the specific attributes of the hardened cement pastes. So, an optimum PPA content was 25 wt% PPA.

Published in Journal of Biomaterials (Volume 5, Issue 1)
DOI 10.11648/j.jb.20210501.11
Page(s) 1-9
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Cement, Ash, Consistency, Setting, Free Lime, Porosity, Strength

References
[1] Eisentraut, ABA (2012) Technology Roadmap Bioenergy for Heat and Power. International Energy Agency.
[2] Darweesh HHM; Abo El-Suoud MR (2019), Palm Ash as a Pozzolanic Material for Portland cement Pastes, To Chemistry Journal, 4, 72-85. http://purkh.com/index.php/tochem.
[3] Raheem, AA; Aedokun; SI; Adeyinka, EA; Adewole, BV (2017) Application of cornstalk ash as partial replacement for cement in the production of interlocking paving stones, International Journal of Engineering Research in Africa, 30: 85-93. https://doi.org/10.4028/www.scientific.net/JERA.30.85.
[4] Darweesh HHM (2005) Effect of combination of Some Pozzolanic Wastes on the Properties of Portland cement Pastes, iiC l’italiana del Cemento, 808, 4, 298-310.
[5] Darweesh HHM; Abo El-Suoud MR (2014) Setting, Hardening and Mechanical Properties of Some Cement / Agrowaste Composites - Part I, American Journal of Mining and Metallurgy, 2, 2, 32-40.
[6] Karim MR; Zain MFM; Jamil M (2012) Strength of Mortar and Concrete as Influenced by Rice Husk Ash: A Review, World Applied Sciences Journal, 19.10, 1501-1513.
[7] Binici, H; Ortlek E (2015) Engineering properties of concrete made with cholemanite, barite, corn stalk, wheat straw and sunflower stalk ash. European Journal of Engineering and Technology, 3.
[8] Darweesh HHM (2020) Influence of Sun Flower Stalk Ash (SFSA) on the behavior of Portland cement pastes, Results in Engineering, Online Pre-proof 100171. https://doi.org/10.1016/j.rineng.2020.100171.
[9] Darweesh HHM; Abo El-Suoud MR (2018) Saw dust ash substitution for cement pastes-Part I”, American j. of Construction and Building Materials, 2, 1, 1-9. http://www.sciencepublishinggroup.com/j/ajcbm.
[10] Darweesh HHM; Abo El-Suoud MR (2019) Influence of sugarcane bagasse ash substitution on Portland cement characteristics, Indian Journal of Engineering, 16, 252-266.
[11] Darweesh HHM; Abo El-Suoud MR (2020) Palm Ash as a Pozzolanic Material for Portland Cement Pastes, To Chemistry Journal, 4, 72-85. http://purkh.com/index.php/tochem.
[12] Hewlett PC; Liska M (2017) Lea’s Chemistry of Cement and Concrete, 5th ed., Edward Arnold Ltd., London, England Google Scholar.
[13] Rukzon S; Chindaprasirt P (2012) Utilization of bagasse ash in high-strength concrete, Materials and Design, 34, 45–50. www.elsevier.com/locate/matdes.
[14] Darweesh HHM; Aboel-Suoud MR (2020) Effect of Agricultural Waste Material on the Properties of Portland Cement Pastes, Journal of Research & Development in Material science,, 13, 1, 1360-1367.
[15] Abdulkadir TS; Oyejobi DO; Lawal AA (2014), Evaluation of Sugarcane Bagasse Ash as a Replacement for Cement in Concrete, Works Acta Tehnica Corviniensis – Bulletin of Engineering (Ilorin: University of Ilorin), 71–76.
[16] Raheem AA; Olasunkanmi BS; Folorunso CS (2012) Saw Dust Ash as Partial Replacement for Cement in Concrete, Technology and management in construction, 4, 2, 474-480. https://doi.org/10.5592/otmcj.2012.2.3.
[17] Zhang H; Hu J; Qi Y; Li C; Chen J; Wang X; He J; Wang S; Hao J; Zhang L, Zhang Y, Li R; Wang S; Chai F (2017) Emission characterization, environmental impact, and control measure of PM2.5 emitted from agricultural crop residue burning in China. Journal of Cleaner Production, 149: 629-635. https://doi.org/10.1016/j.jclepro.2017.02.092.
[18] Abu Bakar BH; Ramadhansyah PJ; Megat MA; Johari MA (2011) Effect of rice husk ash fineness on the chemical and physical properties of concrete”, Mag. Concr. Res., 63, 313-320. https://doi.org/10.1680/macr.10.00019.
[19] Memon SA; Shaikh MA; Akbar H (2011) Utilization of rice husk ash as a mineral admixture”, Constr. Build. Mat., 25, 13, 1044-1048. https://doi.org/10.1016/j.conbuildmat.2010.06.074.
[20] Ettu LO; Ajoku CA; Nwachukwu KC; Awodiji CTG; Eziefula UG (2013) Strength variation of OPC-rice husk ash composites with percentage rice husk ash, Int. J. App. Sci. and Eng. Res., 2, 4, 420-424.
[21] Kartini K (2011) Rice husk ash-pozzolanic material for sustainability, Int. J. Appl. Sci.. Technol., 1, 6, 169-178.
[22] Antiohos SK; Tapali JG; Zervaki M; Sousa-Coutinho J; Tsimas S; Papadakis VG (2013) Low embodied energy cement containing untreated RHA: A strength development and durability study, Const. Build. Materials, 49, 455-463. https://doi.org/10.1016/j.conbuildmat.2013.08.046.
[23] Viet-Thien-An Van, Christiane Rößler, Danh-Dai Bui; Horst-Michael Ludwig (2013) Mesoporous structure and pozzolanic reactivity of rice husk ash in cementitious system, Cons. Build. Materials, 43, 208-216. https://doi.org/10.1016/j.conbuildmat.2013.02.004.
[24] Darweesh, HHM (2020), Characteristics of Portland Cement Pastes Blended with Silica Nanoparticles, To Chemistry, 5, 1-14. http://purkh.com/index.php/tochem.
[25] ASTM-C187-86 (1993), Standard Test Method for Normal Consistency of hydraulic Cement, 148-150.
[26] ASTM-C191-92 (1993), Standard Test Method for Setting Time of Hydraulic Cement, 866-868.
[27] Neville, AM (2011), Properties of Concrete, 5th Edn, Longman Essex (UK), ISBN: 978-0-273-75580-7 (pbk.). http://www.pearsoned.co.uk.
[28] ASTM- C170-90 (1993), Standard Test Method for Compressive Strength of Dimension Stone”, 828-830.
[29] ASTM-C109M (2013), Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. Or [50-mm] Cube Specimens), Annual Book of ASTM Standards. ASTM International, West Conshohocken, PA.
[30] Darweesh HHM, Abo-El-Suoud MR (2015), Quaternary Cement Composites Containing Some Industrial By-products to Avoid the Environmental Pollution, EC Chemistry, 2, 1, 78-91.
[31] Amin M, Abu El-Hassan K (2015), Effect of using different types of nano materials on mechanical properties of high strength concrete, Constr. Build. Mater., 80, 116–124.
[32] Stefanidou M, Papayianni I (2012), Influence of nano-SiO2 on the Portland cement pastes, Compos. Part B-Eng. 43, 2706–2710.
[33] ASTM C618a (2015) Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. ASTM International, West Conshohocken, USA.
[34] Imbabi MS, Carrigan C, McKenna S (2012) Trends and developments in green cement and concrete technology. Int. J. Sustain. Built Environ. 1, 194–216.
[35] Darweesh HHM (2017), Geopolymer cements from slag, fly ash and silica fume activated with sodium hydroxide and water glass, Interceram International”, 6, 1, 226-231. https://doi.org/10.1007/BF03401216.
[36] Rashed AM (2014) Recycled waste glass as fine aggregate replacement in cementitious materials based on Portland cement. Constr. Build. Mater. 72, 340–357. https://doi.org/10.1016/j.conbuildmat.2014.08.092.
[37] Nassar RUD, Soroushian P (2012) Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement. Constr. Build. Mater. 29, 368–377. https://doi.org/10.1016/j.conbuildmat.2011.10.061.
[38] Nassar RUD, Soroushian P (2011) Field investigation of concrete incorporating milled waste glass. J. Solid Waste Technol. Manage. 37 (4), 307–319. https://doi.org/10.5276/JSWTM.2011.307.
[39] Mohammed T U, Ahmed T, Apurbo S M, Mallick TA, Shahriar F, Munim A, Awal AA (2017). Influence of chemical admixtures on fresh and hardened properties of prolonged mixed concrete. Advances in Materials Science and Engineering. 1-11. https://doi.org/10.1155/2017/9187627.
[40] Darweesh, HHM and Nagieb, A (2007), Hydration and micro-structure of Portland/Calcined Bentonite Blended Cement Pastes, Indian Journal of Chemical Technology, 14 301-307.
[41] Heikal M, Ali AI, Ismail MN, Awad S, Ibrahim NS (2014) Behavior of composite cement pastes containing silica nano-particles at elevated temperature, Const. Build. Mater., 70. 339-350. https://doi.org/10.1016/j.conbuildmat.2014.07.078.
[42] Aleem SAE, Heikal Mو Morsi WM (2015) Hydration characteristic, thermal expansion and microstructure of cement containing nano-silica, Const. Buil. Mater, 59. 151-160. https://doi.org/10.1016/j.conbuildmat.2014.02.039.
[43] Nazari A, Riahi S, Riahi S, Shamekhi SF, Khademno A (2010), Influence of Al2O3 nanoparticles on the compressive strength and workability of blended concrete, Journal of American Science, 6, 6-9.
[44] Givi AN, Rashid SA, Aziz FNA, Salleh MAM (2010), Experimental investigation of the size effects of SiO2 nano-particles on the mechanical properties of binary blended concrete, Composites Part B: Engineering, 41, 673-677. https://doi.org/10.1016/j.compositesb.2010.08.003.
[45] Ibrahim NS, Heikal M, Ismail MN (2015), Physico-mechanical, microstructure characteristics and fire resistance of cement pastes containing Al2O3 nano-particles, Const. Build. Mater., 91, 232-242. https://doi.org/10.1016/j.conbuildmat.2015.05.036.
[46] Adesina A (2020) Nanomaterials in cementitious composites: review of durability performance, Journal of Building Pathology and Rehabilitation, 5, 21, 1-9. https://doi.org/10.1007/s41024-020-00089-9.
[47] Land G; Stephan D (2012) The influence of nano-silica on the hydration of ordinary Portland cement. J Mater Sci. https://doi.org/10.1007/s1085 3-011-5881-1.
[48] Madani H; Bagheri A; Parhizkar T (2012) The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement. Cem Concr Res. https://doi.org/10.1016/j.cemco nres.2012.09.004.
[49] Kalhori H; Bagherzadeh B; Bagherpour R; Akhlaghi MA (2020) Experimental study on the influence of the different percentage of nanoparticles on strength and freeze–thaw durability of shotcrete. Constr Build Mater. https://doi.org/10.1016/j.conbu ildmat.2020.11947 0.
Cite This Article
  • APA Style

    Hassan Hassanien Mohamed Darweesh. (2021). Utilization of Physalis Pith Ash as a Pozzolanic Material in Portland Cement Pastes. Journal of Biomaterials, 5(1), 1-9. https://doi.org/10.11648/j.jb.20210501.11

    Copy | Download

    ACS Style

    Hassan Hassanien Mohamed Darweesh. Utilization of Physalis Pith Ash as a Pozzolanic Material in Portland Cement Pastes. J. Biomater. 2021, 5(1), 1-9. doi: 10.11648/j.jb.20210501.11

    Copy | Download

    AMA Style

    Hassan Hassanien Mohamed Darweesh. Utilization of Physalis Pith Ash as a Pozzolanic Material in Portland Cement Pastes. J Biomater. 2021;5(1):1-9. doi: 10.11648/j.jb.20210501.11

    Copy | Download

  • @article{10.11648/j.jb.20210501.11,
      author = {Hassan Hassanien Mohamed Darweesh},
      title = {Utilization of Physalis Pith Ash as a Pozzolanic Material in Portland Cement Pastes},
      journal = {Journal of Biomaterials},
      volume = {5},
      number = {1},
      pages = {1-9},
      doi = {10.11648/j.jb.20210501.11},
      url = {https://doi.org/10.11648/j.jb.20210501.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jb.20210501.11},
      abstract = {Physalis pith ash (PPA) is a renewable and green supplementary cementitious material. It is an effective approach to reduce the quantity of cement that could be used in blended cements. This will reduce the CO2↑ emission, which in turn will lower the environmental pollution. In the current study, the influence of PPA on physicomechanical characteristics of hydrated cement pastes containing various ratios of PPA (0-30 wt.%) up to 90 days was evaluated. Results showed that the water of consistensy as well as setting times, chemically-bound water content, bulk density and compressive strength increased with PPA content. The apparent porosity and calcium dioxide (or free lime) content were clearly reduced with increasing the PPA content. It is therefore concluded that the cement could be partially replaced by 25 wt.% PPA with no reverse response on the features of cement pastes. Any further increase of PPA content, it affected negatively on all the specific attributes of the hardened cement pastes. So, an optimum PPA content was 25 wt% PPA.},
     year = {2021}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Utilization of Physalis Pith Ash as a Pozzolanic Material in Portland Cement Pastes
    AU  - Hassan Hassanien Mohamed Darweesh
    Y1  - 2021/03/26
    PY  - 2021
    N1  - https://doi.org/10.11648/j.jb.20210501.11
    DO  - 10.11648/j.jb.20210501.11
    T2  - Journal of Biomaterials
    JF  - Journal of Biomaterials
    JO  - Journal of Biomaterials
    SP  - 1
    EP  - 9
    PB  - Science Publishing Group
    SN  - 2640-2629
    UR  - https://doi.org/10.11648/j.jb.20210501.11
    AB  - Physalis pith ash (PPA) is a renewable and green supplementary cementitious material. It is an effective approach to reduce the quantity of cement that could be used in blended cements. This will reduce the CO2↑ emission, which in turn will lower the environmental pollution. In the current study, the influence of PPA on physicomechanical characteristics of hydrated cement pastes containing various ratios of PPA (0-30 wt.%) up to 90 days was evaluated. Results showed that the water of consistensy as well as setting times, chemically-bound water content, bulk density and compressive strength increased with PPA content. The apparent porosity and calcium dioxide (or free lime) content were clearly reduced with increasing the PPA content. It is therefore concluded that the cement could be partially replaced by 25 wt.% PPA with no reverse response on the features of cement pastes. Any further increase of PPA content, it affected negatively on all the specific attributes of the hardened cement pastes. So, an optimum PPA content was 25 wt% PPA.
    VL  - 5
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Refractories, Ceramics and Building Materials Department, National Research Centre, Cairo, Egypt

  • Sections