| Peer-Reviewed

Integral Bulge Forming Method for Soccer Ball-Shaped Tank Using Symmetrical Preformed Box Consisting of Plate Parts

Received: 24 September 2022     Accepted: 21 October 2022     Published: 28 October 2022
Views:       Downloads:
Abstract

This study proposes an integral hydro-bulge forming method for a soccer ball-shaped tank to improve the manufacturing problem of conventional spherical tanks. By cutting the hexagonal and pentagonal parts from the flat steel plate and welding them along the sides of each part, a closed polyhedral box is created according to the composition of a soccer ball. Subsequently, pressure is applied with water into the closed polyhedral box, and the expansion force generated from the inside to the outside is used to form a soccer ball-shaped spherical tank. For verification, we simulate the bulge forming process of the soccer ball-shaped tank using the fine element method (FEM) analysis to confirm the analysis results of the stress and plate thickness distribution of the spherical tank created, and the soccer ball-shaped tank is then actually formed using the proposed manufacturing method. The forming performance and effectiveness of the integral hydro-bulge forming method is verified. The roundness of the actually formed soccer ball-shaped spherical tank with a diameter of 500 mm is 2.36 mm, which indicates high forming accuracy. A design formula a=0.4R for regular hexagonal and regular pentagonal plate parts was derived. In the actual forming experiment, a plate part with a side length of 100 mm was designed with a target radius of 250 mm. The measured radius of the actually formed spherical tank was 249.26 mm, and the accuracy of the derived design formula was verified.

Published in American Journal of Mechanics and Applications (Volume 10, Issue 2)
DOI 10.11648/j.ajma.20221002.11
Page(s) 16-24
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2022. Published by Science Publishing Group

Keywords

Spherical Tank, Integral Hydro Forming, Thin-Walled Tank, Steel Plate Press Forming, Forming by Water Pressure

References
[1] Oyelami, A. T., & Olusunle, S. O. O. (2019). Spherical Storage Tank Development Through Mathematical Modeling of Constituent Sections. Mathematical Modelling of Engineering Problems, 6 (3), 467-473. doi.org/10.18280/mmep.060320.
[2] Cheng, B., Huang, J. X., & Shan, Y. (2015). The Economic Design and Analysis for Mixed Model Spherical Tank Shell Angle Partition. Procedia Engineering, 130, 41-47. doi: 10.1016/j.proeng.2015.12.173.
[3] Arabzadeh, V., Niaki, S. T. A., & Arabzadeh, V. (2018). Construction cost estimation of spherical storage tanks: artificial neural networks and hybrid regression—GA algorithms. Journal of Industrial Engineering International, 14, 747-756. doi.org/10.1007/s40092-017-0240-8.
[4] Milovanović, A., & Sedmak, A. (2021). Integrity assessment of ammonia spherical storage tank. Procedia Structural Integrity, 13, 994-999. doi.org/10.1016/j.prostr.2018.12.185.
[5] Rath, S., & Krol, M. (2013), Comparative Risk Assessment for Different LNG-Storage Tank Concepts. Chemical Engineering Transactions, 31, 103-108. doi.org/10.3303/CET1331018.
[6] Ibrahim, A., Ryu, Y., & Saidpour, M. (2015). Stress Analysis of Thin-Walled Pressure Vessels. Modern Mechanical Engineering, 5 (1), 1-9. doi: 10.4236/mme.2015.51001.
[7] Shin, S. H., & Ko, D. E. (2016). A study on forces generated on spherical type LNG tank with central cylindrical part under various static loading. International Journal of Naval Architecture and Ocean Engineering, 8 (6), 530-536. doi.org/10.1016/j.ijnaoe.2016.07.001.
[8] Pan, B., & Cui, W. (2010). An overview of buckling and ultimate strength of spherical pressure hull under external pressure. Marine Structures, 23, 227-240. doi: 10.1016/j.marstruc.2010.07.005.
[9] Adeyefa, O., & Oluwole, O. (2011). Finite Element Analysis of Von-Mises Stress Distribution in a Spherical Shell of Liquified Natural Gas (LNG) Pressure Vessels. Engineering, 3, 1012-1017. doi: 10.4236/eng.2011.310125.
[10] Adeyefa, O., & Oluwole, O. (2013). Finite Element Modeling of Shop Built Spherical Pressure Vessels. Engineering, 5, 537-542, doi: 10.4236/eng.2013.56064.
[11] Kandure, R. S., & Lahoti, G. V. (2019). Design and Structural Analysis of Spherical Pressure Vessel used to Operate a Pneumatic Jack Hammer. International Journal of Engineering Research & Technology, 8 (9), 773-777. doi: 10.17577/IJERTV8IS090234.
[12] Schrader, R. F. (1985). Method of constructing a large spherical tank supported by a skirt on land. United States Patent, US4522010A.
[13] Arne, C. (1950). Spherical segment tank and method of making same. United States Patent, US2668634A.
[14] Kvamsdal, R., & Tobiassen, R. (1976). Ships for transport of liquefied gases. United States Patent, US3968764A.
[15] Mehrasa, H., Liaghat, G., & Javabvar, D. (2012). Experimental analysis and simulation of effective factors on explosive forming of spherical vessel using prefabricated four cones vessel structures. Central European Journal of Engineering, 2, 656-664. doi.org/10.2478/s13531-012-0036-y.
[16] Suzuki, T., & Takenaka, N. (1975). Method of constructing a spherical tank or the like. United States Patent, US3921555A.
[17] Brinkman, H. C. (1942). Storage tank. United States Patent, US2295514A.
[18] Anttila, J., Gustafsson, J., Heinakari, M., Linja, J., & Vaihinen, M. Spherical lng-tank and a production method for such a tank. United States Patent, US5529239A.
[19] Baysinger, F. R. (1980). Liquefied natural gas tank construction. United States Patent, US4181235A.
[20] Yuan, S., & Fan, X. (2019). Developments and perspectives on the precision forming processes for ultra-large size integrated components. International Journal of Extreme Manufacturing, 1 (2), 022002. doi.org/10.1088/2631-7990/ab22a9.
[21] Yuan, S. (2021). Fundamentals and Processes of Fluid Pressure Forming Technology for Complex Thin-Walled Components. Engineering, 7, 358-366. doi.org/10.1016/j.eng.2020.08.014.
[22] Bell, C., Corney, J., Zuelli, N., & Savings, D. (2020). A state of the art review of hydroforming technology. 13, 789-828. doi.org/10.1007/s12289-019-01507-1.
Cite This Article
  • APA Style

    Yang Jing, Jingchao Guan, Chenghai Kong, Wei Zhao, Nobuyuki Gomi, et al. (2022). Integral Bulge Forming Method for Soccer Ball-Shaped Tank Using Symmetrical Preformed Box Consisting of Plate Parts. American Journal of Mechanics and Applications, 10(2), 16-24. https://doi.org/10.11648/j.ajma.20221002.11

    Copy | Download

    ACS Style

    Yang Jing; Jingchao Guan; Chenghai Kong; Wei Zhao; Nobuyuki Gomi, et al. Integral Bulge Forming Method for Soccer Ball-Shaped Tank Using Symmetrical Preformed Box Consisting of Plate Parts. Am. J. Mech. Appl. 2022, 10(2), 16-24. doi: 10.11648/j.ajma.20221002.11

    Copy | Download

    AMA Style

    Yang Jing, Jingchao Guan, Chenghai Kong, Wei Zhao, Nobuyuki Gomi, et al. Integral Bulge Forming Method for Soccer Ball-Shaped Tank Using Symmetrical Preformed Box Consisting of Plate Parts. Am J Mech Appl. 2022;10(2):16-24. doi: 10.11648/j.ajma.20221002.11

    Copy | Download

  • @article{10.11648/j.ajma.20221002.11,
      author = {Yang Jing and Jingchao Guan and Chenghai Kong and Wei Zhao and Nobuyuki Gomi and Xilu Zhao},
      title = {Integral Bulge Forming Method for Soccer Ball-Shaped Tank Using Symmetrical Preformed Box Consisting of Plate Parts},
      journal = {American Journal of Mechanics and Applications},
      volume = {10},
      number = {2},
      pages = {16-24},
      doi = {10.11648/j.ajma.20221002.11},
      url = {https://doi.org/10.11648/j.ajma.20221002.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajma.20221002.11},
      abstract = {This study proposes an integral hydro-bulge forming method for a soccer ball-shaped tank to improve the manufacturing problem of conventional spherical tanks. By cutting the hexagonal and pentagonal parts from the flat steel plate and welding them along the sides of each part, a closed polyhedral box is created according to the composition of a soccer ball. Subsequently, pressure is applied with water into the closed polyhedral box, and the expansion force generated from the inside to the outside is used to form a soccer ball-shaped spherical tank. For verification, we simulate the bulge forming process of the soccer ball-shaped tank using the fine element method (FEM) analysis to confirm the analysis results of the stress and plate thickness distribution of the spherical tank created, and the soccer ball-shaped tank is then actually formed using the proposed manufacturing method. The forming performance and effectiveness of the integral hydro-bulge forming method is verified. The roundness of the actually formed soccer ball-shaped spherical tank with a diameter of 500 mm is 2.36 mm, which indicates high forming accuracy. A design formula a=0.4R for regular hexagonal and regular pentagonal plate parts was derived. In the actual forming experiment, a plate part with a side length of 100 mm was designed with a target radius of 250 mm. The measured radius of the actually formed spherical tank was 249.26 mm, and the accuracy of the derived design formula was verified.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Integral Bulge Forming Method for Soccer Ball-Shaped Tank Using Symmetrical Preformed Box Consisting of Plate Parts
    AU  - Yang Jing
    AU  - Jingchao Guan
    AU  - Chenghai Kong
    AU  - Wei Zhao
    AU  - Nobuyuki Gomi
    AU  - Xilu Zhao
    Y1  - 2022/10/28
    PY  - 2022
    N1  - https://doi.org/10.11648/j.ajma.20221002.11
    DO  - 10.11648/j.ajma.20221002.11
    T2  - American Journal of Mechanics and Applications
    JF  - American Journal of Mechanics and Applications
    JO  - American Journal of Mechanics and Applications
    SP  - 16
    EP  - 24
    PB  - Science Publishing Group
    SN  - 2376-6131
    UR  - https://doi.org/10.11648/j.ajma.20221002.11
    AB  - This study proposes an integral hydro-bulge forming method for a soccer ball-shaped tank to improve the manufacturing problem of conventional spherical tanks. By cutting the hexagonal and pentagonal parts from the flat steel plate and welding them along the sides of each part, a closed polyhedral box is created according to the composition of a soccer ball. Subsequently, pressure is applied with water into the closed polyhedral box, and the expansion force generated from the inside to the outside is used to form a soccer ball-shaped spherical tank. For verification, we simulate the bulge forming process of the soccer ball-shaped tank using the fine element method (FEM) analysis to confirm the analysis results of the stress and plate thickness distribution of the spherical tank created, and the soccer ball-shaped tank is then actually formed using the proposed manufacturing method. The forming performance and effectiveness of the integral hydro-bulge forming method is verified. The roundness of the actually formed soccer ball-shaped spherical tank with a diameter of 500 mm is 2.36 mm, which indicates high forming accuracy. A design formula a=0.4R for regular hexagonal and regular pentagonal plate parts was derived. In the actual forming experiment, a plate part with a side length of 100 mm was designed with a target radius of 250 mm. The measured radius of the actually formed spherical tank was 249.26 mm, and the accuracy of the derived design formula was verified.
    VL  - 10
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Mechanical, Saitama Institute of Technology, Saitama, Japan

  • Department of Mechanical, Saitama Institute of Technology, Saitama, Japan

  • Topy Industries Ltd, Aichi, Japan

  • Weichai Global Axis Technology Co., Ltd, Tokyo, Japan

  • Department of Mechanical, Saitama Institute of Technology, Saitama, Japan

  • epartment of Mechanical, Saitama Institute of Technology, Saitama, Japan

  • Sections