| Peer-Reviewed

Thermal Properties of (Na0.6K0.4)NO3 Thermal Storage System in the Solid-Solid Phase

Received: 22 February 2016     Accepted: 6 March 2016     Published: 29 March 2016
Views:       Downloads:
Abstract

The thermal behaviour for the DTA, DSC and TGA measurements have been carried on the solid phase transformation for the binary eutectic mixture of 60 wt% sodium nitrate (NaNO3) and 40 wt% potassium nitrate (KNO3). Thermal energy storage materials are important for the technology that is applied to reduce cost solar thermal power generation. The NaNO3-KNO3 system is a binary inorganic salt system and it is one of the most promising thermal storage materials. The methods are based on the principle that a change in the physical state of a material is accompanied by the liberation or absorption of heat. The various techniques of thermal analysis are designed for the determination of the enthalpy accompanying the changes in the physical properties of the material. The thermal measurements showed a reversible phase transition at ~114°C during heating process and at ~108°C during cooling process. It has been shown also the presence of thermal hysteresis during this transformation with a magnitude of the hysteresis temperature ~8°C. The thermogravimetery analysis (TGA) indicated that the eutectic system (Na0.6K0.4)NO3 is thermally stable up to the melting point at ≅225°C. This means that the sample under study is structurally stable. DTA measurements were also carried out for the sample at different heating rates of (2, 5, 10, 15 and 20°C/min). Some thermal parameters such as the transition point, enthalpy and the activation energy for the transformation process were estimated at each heating rate. It has been also shown that these parameters are affected by the heating rate. The noticeable effect of heating rate on the thermal parameters means that the heating rate is a main factor to change the thermal interaction potential of the Na and K atoms around the nitrate group (NO3-) during the phase conversion for the eutectic (Na0.6K0.4)NO3 system.

Published in International Journal of Energy and Power Engineering (Volume 5, Issue 2)
DOI 10.11648/j.ijepe.20160502.12
Page(s) 34-38
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Phase Change Material, Thermal Storage, Calorimetry

References
[1] A. Kere, V. Goetz, X. Py, R. Olives, N. Sadiki, E. Mercier, Energy Procedia, 49(2014) 830-839
[2] G. Zanganeh, R. Kanna, C. Walser, A. Pedretti, A. Haselbacher, A. Steinfeld, Solar Energy, 114 (2015) 77-90
[3] Berul and A. G. Bergman, Izv. Sekt. Piz. Khim. Anal., Inst. Obsbch. Neorg. Khim., Akad. Nauk SSSR, 25 (1954) 233
[4] D. Y. Goswami, C. K. Jotshi, M. Olszewski, 1990. Analysis of thermal energy storage in cylindrical PCM capsules embedded in a metal matrix. In: 25th Intersociety Energy Conversion Engineering Conference. IECEC Reno, NV, USA (August 12–17)
[5] N. K. Voskresenskaya: “Handbook of Solid-Liquid Equilibria in Systems of Anhydrous Inorganic Salts,” Kete Press, Jerusalem, 1970, pp. 431-37
[6] Y. J. Zhao, R. Z. Wang, L. W. Wang, N. Yu, Energy, 70(2014) 272-277
[7] M. D. Silverman and J. R. Engel, US_ Dep. Commer. ORNL/TM-5682, 1977
[8] M. Kamimoto, ThermochimicaActa, 49 (1981) 319-331
[9] C. Martin, T. Bauer, H. Müller-Steinhagen, Applied Thermal Engineering 56 (2013) 159-166
[10] D. Kearney, U. Herrmann, P. Nava, B. Kelly, R. Mahoney, J. Pacheco, R. Cable, N. Potrovitza, D. Blake, H. Price, J. Sol. Energy Eng. 125 (2) (2003) 170–176
[11] X. Zhang, J. Tian, K. Xu, and Y. Gao, Journal of Phase Equilibria, 24, 5 (2003) 441-446
[12] B. D. Iverson, S. T. Broome, A. M. Kruizenga, J. G. Cordaro, Solar Energy 86 (2012) 2897–2911
[13] Z. Acem, J. Lopez, E. Palome Del Barrio, Applied Thermal Engineering 30 (2010) 1580-1585
[14] T. Bauer, D. Laing and R. Tamme, Advances in Science and Technology, 74 (2010) 272-277
[15] E. I. Eweka, D. H. Kerridge, Phys. Lett. A 174 (1993) 441–442
[16] W. Pinga, P. Harrowell, N. Byrne, C. A. Angell, ThermochimicaActa 486 (2009) 27–31
[17] W. Hemminger, Int. J. Thermophys., 10 (1998) 765
[18] R. Berg and D. H. Kerridge, Dalton Trans. (2004) 2224-2229
[19] S. Taha, F. El-Kabbany, Y. Bader and M. Tosson, Annalen der Physik, 7, 46, 5 (1989) 355-366
[20] S. Taha and M. Tosson, ThermoChemicaActa, 236 (1994) 217-226
[21] S. Mahadevan, A. Giridhar and A. Singh, J. Phys. Soci. Jap., 35, 1 (1973)
Cite This Article
  • APA Style

    Halima Ibrahim ElSaeedy, Maryam Ayidh Saad Al Shahrani, Karam Fathy Abd El-Rahman, Sayed Taha Mohamed Hassan. (2016). Thermal Properties of (Na0.6K0.4)NO3 Thermal Storage System in the Solid-Solid Phase. International Journal of Energy and Power Engineering, 5(2), 34-38. https://doi.org/10.11648/j.ijepe.20160502.12

    Copy | Download

    ACS Style

    Halima Ibrahim ElSaeedy; Maryam Ayidh Saad Al Shahrani; Karam Fathy Abd El-Rahman; Sayed Taha Mohamed Hassan. Thermal Properties of (Na0.6K0.4)NO3 Thermal Storage System in the Solid-Solid Phase. Int. J. Energy Power Eng. 2016, 5(2), 34-38. doi: 10.11648/j.ijepe.20160502.12

    Copy | Download

    AMA Style

    Halima Ibrahim ElSaeedy, Maryam Ayidh Saad Al Shahrani, Karam Fathy Abd El-Rahman, Sayed Taha Mohamed Hassan. Thermal Properties of (Na0.6K0.4)NO3 Thermal Storage System in the Solid-Solid Phase. Int J Energy Power Eng. 2016;5(2):34-38. doi: 10.11648/j.ijepe.20160502.12

    Copy | Download

  • @article{10.11648/j.ijepe.20160502.12,
      author = {Halima Ibrahim ElSaeedy and Maryam Ayidh Saad Al Shahrani and Karam Fathy Abd El-Rahman and Sayed Taha Mohamed Hassan},
      title = {Thermal Properties of (Na0.6K0.4)NO3 Thermal Storage System in the Solid-Solid Phase},
      journal = {International Journal of Energy and Power Engineering},
      volume = {5},
      number = {2},
      pages = {34-38},
      doi = {10.11648/j.ijepe.20160502.12},
      url = {https://doi.org/10.11648/j.ijepe.20160502.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20160502.12},
      abstract = {The thermal behaviour for the DTA, DSC and TGA measurements have been carried on the solid phase transformation for the binary eutectic mixture of 60 wt% sodium nitrate (NaNO3) and 40 wt% potassium nitrate (KNO3). Thermal energy storage materials are important for the technology that is applied to reduce cost solar thermal power generation. The NaNO3-KNO3 system is a binary inorganic salt system and it is one of the most promising thermal storage materials. The methods are based on the principle that a change in the physical state of a material is accompanied by the liberation or absorption of heat. The various techniques of thermal analysis are designed for the determination of the enthalpy accompanying the changes in the physical properties of the material. The thermal measurements showed a reversible phase transition at ~114°C during heating process and at ~108°C during cooling process. It has been shown also the presence of thermal hysteresis during this transformation with a magnitude of the hysteresis temperature ~8°C. The thermogravimetery analysis (TGA) indicated that the eutectic system (Na0.6K0.4)NO3 is thermally stable up to the melting point at ≅225°C. This means that the sample under study is structurally stable. DTA measurements were also carried out for the sample at different heating rates of (2, 5, 10, 15 and 20°C/min). Some thermal parameters such as the transition point, enthalpy and the activation energy for the transformation process were estimated at each heating rate. It has been also shown that these parameters are affected by the heating rate. The noticeable effect of heating rate on the thermal parameters means that the heating rate is a main factor to change the thermal interaction potential of the Na and K atoms around the nitrate group (NO3-) during the phase conversion for the eutectic (Na0.6K0.4)NO3 system.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Thermal Properties of (Na0.6K0.4)NO3 Thermal Storage System in the Solid-Solid Phase
    AU  - Halima Ibrahim ElSaeedy
    AU  - Maryam Ayidh Saad Al Shahrani
    AU  - Karam Fathy Abd El-Rahman
    AU  - Sayed Taha Mohamed Hassan
    Y1  - 2016/03/29
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijepe.20160502.12
    DO  - 10.11648/j.ijepe.20160502.12
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 34
    EP  - 38
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20160502.12
    AB  - The thermal behaviour for the DTA, DSC and TGA measurements have been carried on the solid phase transformation for the binary eutectic mixture of 60 wt% sodium nitrate (NaNO3) and 40 wt% potassium nitrate (KNO3). Thermal energy storage materials are important for the technology that is applied to reduce cost solar thermal power generation. The NaNO3-KNO3 system is a binary inorganic salt system and it is one of the most promising thermal storage materials. The methods are based on the principle that a change in the physical state of a material is accompanied by the liberation or absorption of heat. The various techniques of thermal analysis are designed for the determination of the enthalpy accompanying the changes in the physical properties of the material. The thermal measurements showed a reversible phase transition at ~114°C during heating process and at ~108°C during cooling process. It has been shown also the presence of thermal hysteresis during this transformation with a magnitude of the hysteresis temperature ~8°C. The thermogravimetery analysis (TGA) indicated that the eutectic system (Na0.6K0.4)NO3 is thermally stable up to the melting point at ≅225°C. This means that the sample under study is structurally stable. DTA measurements were also carried out for the sample at different heating rates of (2, 5, 10, 15 and 20°C/min). Some thermal parameters such as the transition point, enthalpy and the activation energy for the transformation process were estimated at each heating rate. It has been also shown that these parameters are affected by the heating rate. The noticeable effect of heating rate on the thermal parameters means that the heating rate is a main factor to change the thermal interaction potential of the Na and K atoms around the nitrate group (NO3-) during the phase conversion for the eutectic (Na0.6K0.4)NO3 system.
    VL  - 5
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Physics, Faculty of Science for Girls, King Khalid University, Abha, Saudi Arabia

  • Department of Physics, Faculty of Science for Girls, Bisha University, Abha, Saudi Arabia

  • Department of Physics, Faculty of Science for Girls, King Khalid University, Abha, Saudi Arabia

  • Department of Physics, Faculty of Science, King Khalid University, Abha, Saudi Arabia

  • Sections