| Peer-Reviewed

A Novel Technique to Design Flat Fresnel Lens with Uniform Irradiance Distribution

Received: 4 May 2016     Published: 5 May 2016
Views:       Downloads:
Abstract

In this paper, we propose a novel technique to design flat Fresnel lens to achieve big concentration ratio, high uniform irradiance distribution while keeping F-number small using both refraction and total internal reflection (TIR) phenomena. Also, this method can be used to design concentrated photovoltaic (CPV) system without secondary optics lens (SOE). In this technique, Fresnel lens is constructed by many prisms, which are built by ideal Cartesian oval. The design process of Fresnel lens was performed using Matlab program. Ray tracing technique has been used to optimize the structure of lens using LightToolsTM software. The simulation results have been shown that Fresnel lens has a good optical property such asconcentration ratio is 2500x, F-number =0.4, and high uniform irradiance distribution.

Published in International Journal of Energy and Power Engineering (Volume 5, Issue 2)
DOI 10.11648/j.ijepe.20160502.17
Page(s) 73-82
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Fresnel Lens, CPV System, Total Internal Reflection, Second Optics Lens

References
[1] Jui-Wen Pan, Jiun-Yang Huang, Chih-Ming Wang, Hwen-Fen Hong, Yi-Ping Liang, “High concentration and homogenized Fresnel lens without secondary optics element,” Optics Communications, 2011, vol. 284, pp. 4284-4288.
[2] Mehrdad Khamooshi, Hana Salati, Fuat Egelioglu, Ali Hooshyar Faghiri, Judy Tarabishi, and Saeed Babadi, “A Review of Solar Photovoltaic Concentrators,” International Journal of Photoenergy, 2014, vol. 2014, article ID 958521.
[3] E. Lorenzo and A. Luque, “Comparison of Fresnel lenses and parabolic mirrors as solar energy concentrators,” Applied Optics, 1982, vol. 21, pp. 1851-1853.
[4] Lei Jing, Hua Liu, Hui-fu Zhao, Zhenwu Lu, Hongsheng Wu, He Wang, and Jialin Xu, “Design of novel compound Fresnel lens for High-performance photovoltaic concentrator,” International Journal of Photoenergy, 2011, vol. 2012, article ID 630692.
[5] Stanislas Sanfo, Abdoulaye Ouedraogo, “Contribution to the Optical Design of A Concentrator with Uniform Flux for Photovoltaic Panels,” Advances in Energy and Power, 2015, vol. 3, pp. 82-89.
[6] Ralf Leutz, Akio Suzuki, Atsushi Akisawa, Takao Kashiwagi “Design of A Nonimaging Fresnel Lens for Solar Concentrators,” Solar Energy, 1999, Vol. 65, No. 6, pp. 379–387.
[7] Juan C. González, “Design and analysis of a curved cylindrical Fresnel lens that produces high irradiance uniformity on the solar cell,” Applied Optics, 2009, Vol. 48, No. 11, pp. 2127-2132.
[8] N. Yamada and T. Nishikawa, “Evolutionary algorithm for optimization of nonimaging Fresnel lens geometry,” Optics Express, 2010, Vol. 18.
[9] Juan C. Minano, Pablo Benitez, Pablo Zamora, Marina Buljan, Ruben Mohedano, and Asuncion Santamaria, “Free-form optics for Fresnel lens based photovoltaic concentrators” Optical Society of America, 2013, vol. 21, No. S3.
[10] Kwangsun Ryu, Jin-Geun Rhee, Kang-Min Park, Jeong Kim, “Concept and design of modular Fresnel lenses for concentration solar PV system,” Solar energy, 2006, vol. 80, pp. 1580-1587.
[11] E. A. Katz, J. M. Gordon, D. Feuermann, “Effects of ultra-high flux and intensity distribution in multi-junction solar cells,” Prog. Photovoltaics, 2006, vol. 14, pp. 297-303.
[12] http://www.fresneltech.com/.
[13] Ian Wallhead, Teresa Molina Jiménez, Jose Vicente García Ortiz, Ignacio Gonzalez Toledo, and Cristóbal Gonzalez Toledo, “Design of an efficient Fresnel-type lens utilizing double total internal reflection for solar energy collection,” Optics express, 2012, vol. 20, No. S6.
Cite This Article
  • APA Style

    Pham Thanh Tuan, Vu Ngoc Hai, Seoyong Shin. (2016). A Novel Technique to Design Flat Fresnel Lens with Uniform Irradiance Distribution. International Journal of Energy and Power Engineering, 5(2), 73-82. https://doi.org/10.11648/j.ijepe.20160502.17

    Copy | Download

    ACS Style

    Pham Thanh Tuan; Vu Ngoc Hai; Seoyong Shin. A Novel Technique to Design Flat Fresnel Lens with Uniform Irradiance Distribution. Int. J. Energy Power Eng. 2016, 5(2), 73-82. doi: 10.11648/j.ijepe.20160502.17

    Copy | Download

    AMA Style

    Pham Thanh Tuan, Vu Ngoc Hai, Seoyong Shin. A Novel Technique to Design Flat Fresnel Lens with Uniform Irradiance Distribution. Int J Energy Power Eng. 2016;5(2):73-82. doi: 10.11648/j.ijepe.20160502.17

    Copy | Download

  • @article{10.11648/j.ijepe.20160502.17,
      author = {Pham Thanh Tuan and Vu Ngoc Hai and Seoyong Shin},
      title = {A Novel Technique to Design Flat Fresnel Lens with Uniform Irradiance Distribution},
      journal = {International Journal of Energy and Power Engineering},
      volume = {5},
      number = {2},
      pages = {73-82},
      doi = {10.11648/j.ijepe.20160502.17},
      url = {https://doi.org/10.11648/j.ijepe.20160502.17},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20160502.17},
      abstract = {In this paper, we propose a novel technique to design flat Fresnel lens to achieve big concentration ratio, high uniform irradiance distribution while keeping F-number small using both refraction and total internal reflection (TIR) phenomena. Also, this method can be used to design concentrated photovoltaic (CPV) system without secondary optics lens (SOE). In this technique, Fresnel lens is constructed by many prisms, which are built by ideal Cartesian oval. The design process of Fresnel lens was performed using Matlab program. Ray tracing technique has been used to optimize the structure of lens using LightToolsTM software. The simulation results have been shown that Fresnel lens has a good optical property such asconcentration ratio is 2500x, F-number =0.4, and high uniform irradiance distribution.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - A Novel Technique to Design Flat Fresnel Lens with Uniform Irradiance Distribution
    AU  - Pham Thanh Tuan
    AU  - Vu Ngoc Hai
    AU  - Seoyong Shin
    Y1  - 2016/05/05
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijepe.20160502.17
    DO  - 10.11648/j.ijepe.20160502.17
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 73
    EP  - 82
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20160502.17
    AB  - In this paper, we propose a novel technique to design flat Fresnel lens to achieve big concentration ratio, high uniform irradiance distribution while keeping F-number small using both refraction and total internal reflection (TIR) phenomena. Also, this method can be used to design concentrated photovoltaic (CPV) system without secondary optics lens (SOE). In this technique, Fresnel lens is constructed by many prisms, which are built by ideal Cartesian oval. The design process of Fresnel lens was performed using Matlab program. Ray tracing technique has been used to optimize the structure of lens using LightToolsTM software. The simulation results have been shown that Fresnel lens has a good optical property such asconcentration ratio is 2500x, F-number =0.4, and high uniform irradiance distribution.
    VL  - 5
    IS  - 2
    ER  - 

    Copy | Download

Author Information
  • Department of Information and Communication, Myongji University, Yongin City, Republic of Korea

  • Department of Information and Communication, Myongji University, Yongin City, Republic of Korea

  • Department of Information and Communication, Myongji University, Yongin City, Republic of Korea

  • Sections