| Peer-Reviewed

Thermal Performance and Cost to Produce 90°C-Hot Water of Solar Thermal Collector and Hybrid Photovoltaic Thermal (PVT) Collector Systems

Received: 19 September 2016     Published: 19 September 2016
Views:       Downloads:
Abstract

The effects of types of collector systems, operation-control methods, and locations in the world on thermal performance of solar thermal collector systems and cost to produce required amount of 90°C-hot water were studied through numerical simulations. Also performance of a hybrid photovoltaic thermal (PVT) collector system was examined. Calculation results showed that the costs for all solar thermal collector systems were much less than that without solar thermal collector system. Effect of the locations in the word on the cost was large. Total energy efficiency and exergy efficiency of PVT system were lower than those of the solar thermal collector system. The cost for PVT system was higher than that for the solar thermal collector system.

Published in International Journal of Energy and Power Engineering (Volume 5, Issue 4)
DOI 10.11648/j.ijepe.20160504.13
Page(s) 155-162
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Thermal Efficiency, Exergy, Cost, Solar Thermal Collector, Hybrid Photovoltaic Thermal Collector

References
[1] M. Kovarik, P. F. Lesse, "Optimal Control of Flow in Low Temperature Solar Heat Collector," Solar Energy, vol. 18, 1976, pp. 431-435.
[2] P. Dorato, "Optimal Temperature Control of Solar Energy Systems," Solar Energy, vol. 30 (2), 1983, pp. 147-153.
[3] E. Hahne, "Parameter Effects on Design and Performance of Flat Plate Solar Collectors," Solar Energy, vol. 34 (6), 1985, pp. 497-503.
[4] M. Krause, K. Vajen, F. Wiese, H. Ackermann, "Investigations on Optimizing Large Solar Thermal Systems," Solar Energy, vol. 73 (4), 2002, pp. 217-225.
[5] E. Andersen, S. Furbo, "Theoretical Variations of the Thermal Performance of Different Solar Collectors and Solar Combi Systems as Function of the Varying Yearly Weather Conditions in Denmark," Solar Energy, vol. 83 (4), 2009, pp. 552-565.
[6] A. Robles, V. Duong, A. J. Martin, J. L. Guadarrama, G. Diaz, "Aluminium Minichannel Solar Water Heater Performance under Year-Round Weather Conditions," Solar Energy, vol. 110 (12), 2014, pp. 356–364.
[7] J. Wrobel, P. S. Walter, G. Schmitz, "Performance of a Solar Assisted Air Conditioning System at Different Locations," Solar Energy, vol. 92 (6), 2013, pp. 69-83.
[8] S. Hirasawa, T. Kawanami, Y. Okawa, A. Shirai, "Effect of Operation-Control Methods on Collector Thermal Performance of Flat-Plate-Type Evacuated Solar Collector System to Get Hot Water near 100°C," Proc. of 22th International Symposium on Transport Phenomena, Paper-No. 11, 2011.
[9] S. Hirasawa, S. Sato, T. Kawanami, "Study on Heat Transfer Characteristics of Loop Heat Pipe for Solar Collector," Transaction on Control and Mechanical Systems, vol. 2 (4), 2013, pp. 149-154.
[10] S. Hirasawa, R. Tsubota, T. Kawanami, K. Shirai, "Reduction of Heat Loss from Solar Thermal Collector by Diminishing Natural Convection with High-Porosity Porous Medium," Solar Energy, vol. 97, 2013, pp. 305-313.
[11] S. Hirasawa, T. Kawanami, K. Shirai, "Optimal System Design and Operation-Control Method for Evacuated Solar Thermal Collector System to Obtain Hot Water near 100°C," Proc. of International Conference on Engineering and Applied Sciences Optimization, No. 3074, 2014.
[12] S. Dubey, A. A. O. Tay, "Testing of Two Different Types of Photovoltaic–Thermal (PVT) Modules with Heat Flow Pattern under Tropical Climatic Conditions," Energy for Sustainable Development, vol. 17, 2013, pp. 1-12.
[13] G. Evola, L. Marletta, "Exergy and Thermoeconomic Optimization of a Water-Cooled Glazed Hybrid Photovoltaic/Thermal (PVT) Collector," Solar Energy, vol. 107, 2014, pp. 12-25.
[14] Shyama, G. N. Tiwari, I. M. Al-Helal, "Analytical Expression of Temperature Dependent Electrical Efficiency of N-PVT Water Collectors Connected in Series," Solar Energy, vol. 114, 2015, pp. 61-76.
[15] M. Lammle, T. Kroyer, S. Fortuin, M. Wiese, M. Hermann, "Development and Modelling of Highly-Efficient PVT Collectors with Low-Emissivity Coatings," Solar Energy, vol. 130, 2016, pp. 161-173.
[16] Blue Tec Gmb H & Co., Technical information, Available at: http://www.bluetec-germany.de/fileadmin/user_upload/pdf/produktinfos/60609_echn_doku_eng.pdf.
[17] J. P. Holman, Heat Transfer, 9th Ed., McGraw-Hill International Book Co., Boston, 2002.
[18] R. P. Collins, E. G. Miravete, "Mathematical Model of a Hybrid Solar Panel," Proc. of ASME 2014 International Mechanical Engineering Congress and Exposition, IMECE 2014-37259, 2014.
[19] Japan Meteorological Agency, Weather, Climate & Earthquake Information, Available at: http://www. jma.go.jp/jma/ indexe.htm.
[20] U.S. Department of Energy, Energy Plus Energy Simulation Software, Available at: http://www.eere. energy.gov/buildings/ energyplus/cfm/weather_data.cfm.
Cite This Article
  • APA Style

    Shigeki Hirasawa, Tsuyoshi Kawanami, Katsuaki Shirai. (2016). Thermal Performance and Cost to Produce 90°C-Hot Water of Solar Thermal Collector and Hybrid Photovoltaic Thermal (PVT) Collector Systems. International Journal of Energy and Power Engineering, 5(4), 155-162. https://doi.org/10.11648/j.ijepe.20160504.13

    Copy | Download

    ACS Style

    Shigeki Hirasawa; Tsuyoshi Kawanami; Katsuaki Shirai. Thermal Performance and Cost to Produce 90°C-Hot Water of Solar Thermal Collector and Hybrid Photovoltaic Thermal (PVT) Collector Systems. Int. J. Energy Power Eng. 2016, 5(4), 155-162. doi: 10.11648/j.ijepe.20160504.13

    Copy | Download

    AMA Style

    Shigeki Hirasawa, Tsuyoshi Kawanami, Katsuaki Shirai. Thermal Performance and Cost to Produce 90°C-Hot Water of Solar Thermal Collector and Hybrid Photovoltaic Thermal (PVT) Collector Systems. Int J Energy Power Eng. 2016;5(4):155-162. doi: 10.11648/j.ijepe.20160504.13

    Copy | Download

  • @article{10.11648/j.ijepe.20160504.13,
      author = {Shigeki Hirasawa and Tsuyoshi Kawanami and Katsuaki Shirai},
      title = {Thermal Performance and Cost to Produce 90°C-Hot Water of Solar Thermal Collector and Hybrid Photovoltaic Thermal (PVT) Collector Systems},
      journal = {International Journal of Energy and Power Engineering},
      volume = {5},
      number = {4},
      pages = {155-162},
      doi = {10.11648/j.ijepe.20160504.13},
      url = {https://doi.org/10.11648/j.ijepe.20160504.13},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.20160504.13},
      abstract = {The effects of types of collector systems, operation-control methods, and locations in the world on thermal performance of solar thermal collector systems and cost to produce required amount of 90°C-hot water were studied through numerical simulations. Also performance of a hybrid photovoltaic thermal (PVT) collector system was examined. Calculation results showed that the costs for all solar thermal collector systems were much less than that without solar thermal collector system. Effect of the locations in the word on the cost was large. Total energy efficiency and exergy efficiency of PVT system were lower than those of the solar thermal collector system. The cost for PVT system was higher than that for the solar thermal collector system.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Thermal Performance and Cost to Produce 90°C-Hot Water of Solar Thermal Collector and Hybrid Photovoltaic Thermal (PVT) Collector Systems
    AU  - Shigeki Hirasawa
    AU  - Tsuyoshi Kawanami
    AU  - Katsuaki Shirai
    Y1  - 2016/09/19
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijepe.20160504.13
    DO  - 10.11648/j.ijepe.20160504.13
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 155
    EP  - 162
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20160504.13
    AB  - The effects of types of collector systems, operation-control methods, and locations in the world on thermal performance of solar thermal collector systems and cost to produce required amount of 90°C-hot water were studied through numerical simulations. Also performance of a hybrid photovoltaic thermal (PVT) collector system was examined. Calculation results showed that the costs for all solar thermal collector systems were much less than that without solar thermal collector system. Effect of the locations in the word on the cost was large. Total energy efficiency and exergy efficiency of PVT system were lower than those of the solar thermal collector system. The cost for PVT system was higher than that for the solar thermal collector system.
    VL  - 5
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Department of Mechanical Engineering, Kobe University, Rokkodai, Nada, Kobe, Hyogo, Japan

  • Department of Mechanical Engineering, Kobe University, Rokkodai, Nada, Kobe, Hyogo, Japan

  • Department of Mechanical Engineering, Kobe University, Rokkodai, Nada, Kobe, Hyogo, Japan

  • Sections