American Journal of Mechanical and Materials Engineering

Volume 5, Issue 2, June 2021

  • Physico-chemical Modeling of Phase Separation in Fe-21.4 Cr Steel with 1.14 Mo Using the Provisions of Non-equilibrium Thermodynamics

    Serhii V. Bobyr, Dmitro V. Loshkarev

    Issue: Volume 5, Issue 2, June 2021
    Pages: 23-28
    Received: 18 May 2021
    Accepted: 8 June 2021
    Published: 21 June 2021
    Downloads:
    Views:
    Abstract: The use of ferritic-martensitic steels, for example, Fe-Cr and Fe-Cr-Al alloys as structural material for fast neutron reactors has been advocated due to their relatively low rate of swelling at elevated temperatures. Because of the high Cr-content, the Fe-Cr alloys are not suitable for use at temperatures around 500°С due to the miscibility gap in... Show More
  • Influence of Temperature on Wax Deposit on Corrosion of Crude Oil Pipeline

    Nnorom Obinichi, Alexander Nwachukwu Okpala, Tolumoye Johnnie Tuaweri

    Issue: Volume 5, Issue 2, June 2021
    Pages: 29-34
    Received: 25 May 2021
    Accepted: 11 June 2021
    Published: 25 June 2021
    Downloads:
    Views:
    Abstract: The paper aims to study the effect of temperature on wax deposition on corrosion of crude oil pipeline at different flow rate with time. The waxy crude oil sample is pumped into the design and fabricated experimental flow-loop set up under different operating conditions. The effect of temperature on corrosion at different flow rate of wax depositio... Show More
  • The Technology of Programmed Thermo-mechanical Processing for Structural Steel

    Radkevich Mikhail Mikhailovich

    Issue: Volume 5, Issue 2, June 2021
    Pages: 35-38
    Received: 2 December 2020
    Accepted: 4 January 2021
    Published: 28 June 2021
    Downloads:
    Views:
    Abstract: This paper discusses the technology that allows to obtain high-strength products made of structural carbon and alloy steels with hardening processing named the technology of programmed thermo-mechanical processing (PTMP). Targeted material structure research of hot deformation processing makes possible creation of new important technologies of ther... Show More