Engineering Physics


Volume 2, Issue 1, June 2018

  • Modeling the Processes of Packet Losses in Telecommunication Networks in Program Anylogic

    Azamat Qodirov

    Issue: Volume 2, Issue 1, June 2018
    Pages: 1-5
    Received: 6 March 2018
    Accepted: 27 March 2018
    Published: 20 April 2018
    Abstract: This paper deals with assessing and comparisons the real it is known for everyone that nowadays the services of the telecommunication networks are being developed day-to-day. The acceptable way of transmission data with the high quality, effect and safety through the network is to use the packet switching in the network. The main part of telecommun... Show More
  • Microstructural Characterization of Ti20Zr20Cu40Ni20 Metallic Glass

    Panugothu Rama Rao, Anil Kumar Bhatnagar, Bhaskar Majumdar

    Issue: Volume 2, Issue 1, June 2018
    Pages: 6-10
    Received: 13 March 2018
    Accepted: 28 March 2018
    Published: 4 May 2018
    Abstract: In the present investigation, we present our results on characterization of Ti joints, brazed with metallic glass ribbons of Ti20Zr20Cu40Ni20 alloy. Initially, metallic glass ribbons were produced using a vacuum melt spinner and used as filler materials for vacuum brazing of two Ti alloy plates at 1270 K. Field-Emission Scanning Electron Microscopy... Show More
  • Locate Objects Mechanical Damage Based on Fiber-Optic Communication Systems

    Rakhimov Baxtiyorjon Ne’matovich, Alimjonov Botirjon Abdulmaqsud O’g’li

    Issue: Volume 2, Issue 1, June 2018
    Pages: 11-14
    Received: 28 February 2018
    Accepted: 26 March 2018
    Published: 7 May 2018
    Abstract: This work is devoted to the development of a method for monitoring the stability of hydraulic structures (dams), which created a monitoring system, operator can make a conclusion about the reliability of controlled structures as well as data on the level of protection facilities and experimental results are presented.
  • Synthesis and Characterization of Sustainable Man-Made Low Cost Clay Bricks with Bamboo Leaf Ash

    Pius Rodney Fernando, Gayan Lakpriya Kannangara, Gamage Prasad Buddhika, Asmathul Urushiya

    Issue: Volume 2, Issue 1, June 2018
    Pages: 15-22
    Received: 15 March 2018
    Accepted: 30 March 2018
    Published: 9 May 2018
    Abstract: This studies investigated a few engineering properties of the effect of bamboo leaf ash blended with brick clay. The bamboo leaves used for this study have been gathered in the agricultural farm, Eastern University, Sri Lanka and the brick clay was acquired from Verpavettuvan, on the depth of 1 to 1.5 m beneath the earth surface. The leaves have be... Show More
  • Natural Ventilation of Smoke Subject to Wind Pressure Within Fire Safety Engineering Approach

    Rachid Fakir, Noureddine Barka, Jean Brousseau

    Issue: Volume 2, Issue 1, June 2018
    Pages: 23-31
    Received: 17 August 2018
    Accepted: 3 September 2018
    Published: 25 September 2018
    Abstract: This paper presents an analytical model able to explore the design method of natural smoke evacuation through an exhaust vent subject to wind pressure. The proposed model can be used to determine the flow rate of smoke and the optimal section of the exhaust vent according to the geometric parameters of the room, the heat release rate and the pressu... Show More